These warnings can reveal errors in logic, so quiet them by checking
if the features are enabled before using variables or by assigning
empty strings in some cases.
- Check CMAKE_THREAD_LIBS_INIT is set before use as CMake docs
note that this may be left unset if it's not needed.
- Remove BOOST/OPENVDB/VULKAN references when disable.
- Define INC_SYS even when empty.
- Remove PNG_INC from freetype (not defined anywhere).
It was introduced in commit https://developer.blender.org/rB0fb12a9c2ebc
The problem was that the tool uses the same values for all modes,
but the new calculation must be only for Draw mode.
Now the mode is checked.
When adding a new layer from the viewport, the newly created layer
is set as active, which is visible in the properties panel,
but the selection in the dopesheet was not updated accordingly,
due to a missing notifier which is added in this patch.
When drawing using the option `Outline` the result stroke
was not using the Vertex Color option and always was converted
using material.
Now the vertex color option is used.
Due an internal scale of the brush size done by grease pencil
draw tool (this scale factor cannot be removed), the size of the
radial control is not equal to the actual stroke thickness and
this makes the radial size displayed useless.
This patch adds a new property that allows to pass the
path of the tool path and this value is used to apply
the correct scale to the radial size.
Reviewed By: mendio, frogstomp, pepeland, brecht
Differential Revision: https://developer.blender.org/D16866
Multiframe copy paste operations were prohibited by a block of code.
While this is understandable as it prevents confusing actions, there is a good use case to allow multiframe copy pasting.
This patch does:
- remove restricting block of code
- adds outer loops for frames both in copy and paste actions.
In copy action it will create an array of selected strokes from all selected frames
In paste action it will create new from previous copy action merged to a single frame. It will paste to all selected frames and create new frame if autokey is on and time cursor is not on any of the keyframes.
The main usecase is for creating motion smears as in examples attached. The user still need to do some actions in order to achieve desired look, such as stroke ordering and deleting excessive strokes.
{F14069747}
{F14069743}
Reviewed By: antoniov, mendio
Differential Revision: https://developer.blender.org/D16805
This patch adds rename popup when using Y key to switch
active layer and choosing New layer in Draw mode.
It follows https://developer.blender.org/D15092, which introduced this
for moving selected strokes to layers in Edit mode.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D16877
Remove the option to display the real size of the cursor
and set as default. Now the cursor is displayed or not using
show_cursor option, but if it's displayed always use the real size.
The color of the brush cursor is changed depending
of the mode selected.
If the mode is stroke vertex color, use vertex color, otherwise
it uses material stroke color.
When drawing strokes in Grease Pencil, it was always a bit hard
to predict how thick the strokes would be, because there was
no visual reference of the thickness in the cursor.
This patch adds that visual reference. It shows the brush size
as a circle in the draw cursor.
Showing the brush size can be toggled in the Cursor menu
of the Grease Pencil draw tool.
Request in RCS with 26 upvotes for this option:
https://blender.community/c/rightclickselect/0zfbbc
On the technical side: the brush size is calculated
in 3D space and takes zoom level into account, as well as
object/layer transfrom, layer thickness change (gpl->line_change)
and thickness scale (gpd->pixfactor).
Reviewed By: mendio, antoniov
Differential Revision: https://developer.blender.org/D16851
Required by Metal backend for efficient shader compilation. EEVEE material
resource binding permutations now controlled via CreateInfo and selected
based on material options. Other existing CreateInfo's also modified to
ensure explicitness for depth-writing mode. Other missing bindings also
addressed to ensure full compliance with the Metal backend.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16243
If there is a layer that hasn't frames but is not the active layer
the pointer to frames can be NULL and crash.
Now, the empty layers are skipped.
Reported to me by Samuel Bernou.
This just replaces the combined usage of OB_MODE_PAINT_GPENCIL
OB_MODE_SCULPT_GPENCIL
OB_MODE_WEIGHT_GPENCIL
OB_MODE_VERTEX_GPENCIL.
Differential Revision: https://developer.blender.org/D16652
Before, the frame was not created, but now if there is
a previous stroke and teh frame changed, the new keyframe
is created.
This is related to T102623
Actually, the interpolation can be done only between keyframes different of breakdown type,
but in some cases, this is not convenient.
Now, a new option is displayed to allow the interpolation using breakdown keyframes
as interpolation extremes.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D16515
Caused by {rBbf8507414889}
Above comit set the wrong cursors (WM_CURSOR_DEFAULT).
When releasing MMB, we need to return to WM_CURSOR_PAINT_BRUSH.
When exiting, we need to return to WM_CURSOR_DOT (since this is the
default cursor for the tool, see `_defs_gpencil_paint` >
`generate_from_brushes`)
Maniphest Tasks: T102650
Differential Revision: https://developer.blender.org/D16591
Caused by rB85f90ed6fd88.
Above commit made sure whole strokes are selected when the
GP_SELECTMODE_STROKE is used in different modes, but ignored the fact
that this can also already be set by the entire_strokes select operator
property.
This is now corrected.
Differential Revision: https://developer.blender.org/D16576
Use active object accessor, and then access data from the
object. There is no need to have an API call for shortcut
of all object fields.
Should be no functional change.
The auto-masking was working by Brush and this was very
inconvenient because it was necessary set the options by
Brush, now the options are global and can be set at once.
Also, the automa-masking now works with `and` logic
and not with `or` as before. That means that a stroke
must meet all the conditions of the masking.
Added new Layer and Material options to masking the
strokes using the same Layer/Material of the selected stroke.
Before, only Active Layer and Active Material could be masked.
The options of masking has been moved to the top-bar using
the same design of Mesh Sculpt masking.
As result of the changes above, the following props changed:
Removed:
`brush.gpencil_settings.use_automasking_strokes`
`brush.gpencil_settings.use_automasking_layer`
`brush.gpencil_settings.use_automasking_material`
Added:
`tool_settings.gpencil_sculpt.use_automasking_stroke`
`tool_settings.gpencil_sculpt.use_automasking_layer_stroke`
`tool_settings.gpencil_sculpt.use_automasking_material_stroke`
`tool_settings.gpencil_sculpt.use_automasking_layer_active`
`tool_settings.gpencil_sculpt.use_automasking_material_active`
Reviewed by: Julien Kaspar, Matias Mendiola, Daniel Martinez Lara
The goal is to improve clarity and readability, without
introducing big design changes.
Follows the recent obmat to object_to_world refactor: the
similar naming is used, and it is a run-time only rename,
meaning, there is no affect on .blend files.
This patch does not touch the redundant inversions. Those
can be removed in almost (if not all) cases, but it would
be the best to do it as a separate change.
Differential Revision: https://developer.blender.org/D16367
Motivation is to disambiguate on the naming level what the matrix
actually means. It is very easy to understand the meaning backwards,
especially since in Python the name goes the opposite way (it is
called `world_matrix` in the Python API).
It is important to disambiguate the naming without making developers
to look into the comment in the header file (which is also not super
clear either). Additionally, more clear naming facilitates the unit
verification (or, in this case, space validation) when reading an
expression.
This patch calls the matrix `object_to_world` which makes it clear
from the local code what is it exactly going on. This is only done
on DNA level, and a lot of local variables still follow the old
naming.
A DNA rename is setup in a way that there is no change on the file
level, so there should be no regressions at all.
The possibility is to add `_matrix` or `_mat` suffix to the name
to make it explicit that it is a matrix. Although, not sure if it
really helps the readability, or is it something redundant.
Differential Revision: https://developer.blender.org/D16328
There were two problems:
* The stroke was deleted if the last point was selected. Now
the stroke is flipped because is faster.
* If the second point was selected, the first point was removed
because the internal api, removed one point strokes by
default. This was done becaus ethe tools that used this API
did not need one point strokes as result. Now this optional
and keep one point strokes.
There was a problem with the hash table that was
not created as expected.
Also fixed an unreported memory leak in Grab tool not
related to this crash but detected during debug.
The actual length of extension lines can be adjusted using wheel mouse
but this is very inconvenient for tablet users.
Now, the extension can be adjusted using MMB of the pen.
There was a similar request in Right-Click Select
Reviewed By: Matias Mendiola, Daniel Martinez Lara
Differential Revision: https://developer.blender.org/D16128
The problem was the conversion to object space converted the
points to zero.
Now, the new function `zero_axis_bias_m4` is used in order to add
a small bias in the inverse matrix and avoid the zero points.
A known math issue is the stroke can be offsetted if the scale is set to 1
again. In this case apply the scale to reset to 1.
Differential Revision: https://developer.blender.org/D16162
This is the conventional way of dealing with unused arguments in C++,
since it works on all compilers.
Regex find and replace: `UNUSED\((\w+)\)` -> `/*$1*/`
gpencil_point_to_parent_space -> gpencil_point_to_world_space
The old name was not clear because it looked it was moving into
the object space, but really is doing the opposite.
gpencil_apply_parent->gpencil_world_to_object_space
gpencil_apply_parent_point->gpencil_world_to_object_space_point
The old name was not descriptive enough.
