These warnings can reveal errors in logic, so quiet them by checking
if the features are enabled before using variables or by assigning
empty strings in some cases.
- Check CMAKE_THREAD_LIBS_INIT is set before use as CMake docs
note that this may be left unset if it's not needed.
- Remove BOOST/OPENVDB/VULKAN references when disable.
- Define INC_SYS even when empty.
- Remove PNG_INC from freetype (not defined anywhere).
This is a mere "get this to compile in C++", didn't do changes like
using `MEM_cnew()` instead of `MEM_calloc()`.
Needed for the blender-project-basics branch, so I don't have to write C
wrappers for a single call from this file.
Adds a new `source/blender/asset_system` directory and moves asset
related files from BKE to it. More asset related code can follow
(e.g. asset indexing, ED_assetlist stuff) but needs further work to
untangle it. I also kept `BKE_asset.h` and `asset.cc` as is, since they
deal with asset DNA data mostly, thus make sense in BKE.
Motivation:
- Makes the asset system design more present (term wasn't even used in
code before).
- An `asset_system` directory is quite descriptive (trivial to identify
core asset system features) and makes it easy to find asset code.
- Asset system is mostly runtime data, with little relation to other
`Main`/BKE/DNA types.
- There's a lot of stuff in BKE already. It shouldn't be just a dump for
all stuff that seems core enough.
- Being its own directly helps us be more mindful about encapsulating
the module well, and avoiding dependencies on other modules.
- We can be more free with splitting files here than in BKE.
- In future there might be an asset system BPY module, which would then
map quite nicely to the `asset_system` directory.
Checked with some other core devs, consensus seems that this makes
sense.
This adds callbacks to `SpaceType` to make each editor responsible to
manage their own .blend I/O, and moves relevant code from `screen.c`
to the editors files.
Differential Revision: D11069
I'm adding some asset APIs/types in C++ that the file-listing code would
use. I prefer porting this code to C++ over adding a C-API for the asset
code.
Includes some minor cleanups that shouldn't change behavior, like using
`MEM_new()`/`MEM_cnew()`, C++ style C-library includes,
`LISTBASE_FOREACH()`, removing unnecessary typedefs, etc.
With libepoxy we can choose between EGL and GLX at runtime, as well as
dynamically open EGL and GLX libraries without linking to them.
This will make it possible to build with Wayland, EGL, GLVND support while
still running on systems that only have X11, GLX and libGL. It also paves
the way for headless rendering through EGL.
libepoxy is a new library dependency, and is included in the precompiled
libraries. GLEW is no longer a dependency, and WITH_SYSTEM_GLEW was removed.
Includes contributions by Brecht Van Lommel, Ray Molenkamp, Campbell Barton
and Sergey Sharybin.
Ref T76428
Differential Revision: https://developer.blender.org/D15291
Currently only supports single image frames (no animation possible).
If quality slider is set to 100 then lossless compression will be used,
otherwise lossy compression is used.
Gives about 35% reduction of filesize save when re-saving splash screens with lossless
compression.
Also saves much faster, up to 15x faster than PNG with a better compression ratio as a plus.
Note, this is currently left disabled until we have WebP libs (see T95206)
For testing precompiled libs can be downloaded from Google:
https://storage.googleapis.com/downloads.webmproject.org/releases/webp/index.html
Differential Revision: https://developer.blender.org/D1598
Lets `makesrna` generate a `RNA_prototypes.h` header with declarations for all
RNA properties. This can be included in regular source files when needing to
reference RNA properties statically.
This solves an issue on MSVC with adding such declarations in functions, like
we used to do. See 800fc17367. Removes any such declarations and the related
FIXME comments.
Reviewed By: campbellbarton, LazyDodo, brecht
Differential Revision: https://developer.blender.org/D13837
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
Previously, macros were ifdefed using the cmake option `WITH_INTERNATIONAL`
However, the is unnecessary as withen the functions themselves have checks for building without internationalization.
This also means that many `add_definitions(-DWITH_INTERNATIONAL)` are also unnecessary.
Reviewed By: mont29, LazyDodo
Differential Revision: https://developer.blender.org/D13929
Asset library indexing would store indexes of asset files to speed up
asset library browsing.
* Indexes are read when they are up to date
** Index should exist
** Index last modify data should be later than the file it indexes
** Index version should match
* The index of a file containing no assets can be load without opening
the index file. The size of the file should be below a 32 bytes.
* Indexes are stored on a persistent cache folder.
* Unused index files are automatically removed.
The structure of the index files contains all data needed for browsing assets:
```
{
"version": <file version number>,
"entries": [{
"name": "<asset name>",
"catalog_id": "<catalog_id>",
"catalog_name": "<catalog_name>",
"description": "<description>",
"author": "<author>",
"tags": ["<tag>"]
}]
}
```
Reviewed By: sybren, Severin
Maniphest Tasks: T91406
Differential Revision: https://developer.blender.org/D12693
The Asset Browser now displays a tree with asset catalogs in the left
sidebar.
This replaces the asset categories. It uses the new UI tree-view API
(https://wiki.blender.org/wiki/Source/Interface/Views#Tree-View).
Buttons are displayed for adding and removing of catalogs. Parent items
can be collapsed, but the collapsed/uncollapsed state is not stored in
files yet.
Note that edits to catalogs (e.g. new or removed catalogs) are only
written to the asset library's catalog definition files when saving a
.blend.
In the "Current File" asset library, we try to show asset catalogs from
a parent asset library, or if that fails, from the directory the file is
stored in. See adaf4f56e1.
There are plenty of TODOs and smaller glitches to be fixed still. Plus a
UI polishing pass should be done.
Important missing UI features:
* Dragging assets into catalogs (WIP, close to being ready).
* Renaming catalogs
* Proper handling of catalogs in the "Current File" asset library
(currently not working well).
The "Current File" asset library is especially limited still. Since this
is the only place where you can assign assets to a catalog, this makes
the catalogs very cumbersome in general. To assign an asset to a
catalog, one has to manually copy the Catalog ID (a random hash like
number) to the asset metadata through a temporary UI in the Asset
Browser Sidebar. These limitations should be addressed over the next few
days, they are high priority.
Differential Revision: https://developer.blender.org/D12670
Catalogs work like directories on disk (without hard-/symlinks), in that
an asset is only contained in one catalog.
See T90066 for design considerations.
#### Known Limitations
Only a single catalog definition file (CDF), is supported, at
`${ASSET_LIBRARY_ROOT}/blender_assets.cats.txt`. In the future this is
to be expanded to support arbitrary CDFs (like one per blend file, one
per subdirectory, etc.).
The current implementation is based on the asset browser, which in
practice means that the asset browser owns the `AssetCatalogService`
instance for the selected asset library. In the future these instances
will be accessible via a less UI-bound asset system.
The UI is still very rudimentary, only showing the catalog ID for the
currently selected asset. Most notably, the loaded catalogs are not
shown yet. The UI is being implemented and will be merged soon.
#### Catalog Identifiers
Catalogs are internally identified by UUID. In older designs this was a
human-readable name, which has the problem that it has to be kept in
sync with its semantics (so when renaming a catalog from X to Y, the
UUID can be kept the same).
Since UUIDs don't communicate any human-readable information, the
mapping from catalog UUID to its path (stored in the Catalog Definition
File, CDF) is critical for understanding which asset is stored in which
human-readable catalog. To make this less critical, and to allow manual
data reconstruction after a CDF is lost/corrupted, each catalog also has
a "simple name" that's stored along with the UUID. This is also stored
on each asset, next to the catalog UUID.
#### Writing to Disk
Before saving asset catalogs to disk, the to-be-overwritten file gets
inspected. Any new catalogs that are found thre are loaded to memory
before writing the catalogs back to disk:
- Changed catalog path: in-memory data wins
- Catalogs deleted on disk: they are recreated based on in-memory data
- Catalogs deleted in memory: deleted on disk as well
- New catalogs on disk: are loaded and thus survive the overwriting
#### Tree Design
This implements the initial tree structure to load catalogs into. See
T90608, and the basic design in T90066.
Reviewed By: Severin
Maniphest Tasks: T91552
Differential Revision: https://developer.blender.org/D12589
No functional change, this adds LIB definition and args to cmake files.
Without this it's difficult to migrate away from 'BLENDER_SORTED_LIBS'
since there are many platforms/configurations that could break when
changing linking order.
Manually add and enable WITHOUT_SORTED_LIBS to try building
without sorted libs (currently fails since all variables are empty).
This check will eventually be removed.
See T46725.
It basically rewrites most of filelist.c, with some more limited changes in other areas of filebrowser.
From user perspective, it:
* Removes some info in 'long' drawing mode (owner, permissions) - OS-specific data that do not really matter in Blender!
* Makes short/long display 'fixed' size (among four choices, like thumbnails mode).
* Allows to list several layers of dirtree at once, in a flat way (inside .blend files and/or real directories).
* Consequently, adds datablocks types filtering.
* Uses way less RAM when listing big directories, especially in thumbnail mode (we are talking of several hundred of MiB spared).
* Generates thumbnails way faster.
From code perspective, it:
* Is ready for asset engine needs (on data structure level in filebrowser's listing).
* Simplifies and makes 'generic' file listing much lighter.
* Separates file listing in three different aspects:
** 'generic' filelisting (in BLI), which becomes a shallow wrapper around stat struct.
** 'filebrowser drawing' filelisting, which only contains current visible subset of the whole list (sliding window), with extra drawing data (strings for size, date/time, preview, etc.).
** 'asset-ready' filelisting, which is used for operations common to 'basic' filehandling and future asset-related one.
* Uses uuid's to handle file selection/state in the browser, instead of using flags in filelisting items.
* Uses much lighter BLI_task handling for previews, instead of heavy 'job' system (using the new 'notifier' timer to handle UI refresh, in similar way to jobs).
* Moves .blend datablocks preview handling to IMB_thumbnail (necessary to avoid storing all datablock previews at once, and gives better consistency and performances too).
Revision: https://developer.blender.org/D1316
Thanks to Campbell & Sergey for the reviews. :)
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
Adds support for selecting/deselecting files in File Browser using the
arrow keys. All directions (up, down, left, right) are possible.
When to Select, When to Deselect?
Standard behaviour is selecting, however if we move into a block of
already selected files (meaning 2+ files are selected) we start
deselecting
Possible Selection Methods
Simple selection (arrow-key): All other files are deselected
Expand selection (Shift+arrow key): Add to/remove from existing
selection
ill-Expand selection (Ctrl+Shift+arrow key): Add to/remove from existing
selection and fill everything in-between
From which file do we start navigating?
From each available selection method (Mouse-, Walk-, All-, Border
Select), we use the last selected file. If there's no selection at all
we use the first (down/right arrow) or last (up/left arrow) file.
(Ideally, the view would automatically be set to the new selection, but
this behaviour overlaps with an other patch I've been working on, so
prefer to do that separately)
(Also tweaks color for highlighted file for better feedback)
D1297, Review done by @campbellbarton, thx a lot :)
We now have openimageio building when cycles builds or when it's
manually set to build.
(I reverted the _IMAGE_ in the define name because I think the closer
the cmake flags match the defines in the software the better, and there
is no reason to rename all the existent WITH_OPENIMAGEIO references in
CMakeLists.txt - which would be the alternative)
We now support the combined layer of Photoshop files (stored as layer 0
in the file). This way users can keep their files as multilayer PSD and
Blender always handle them as flat images.
For perfect alpha this requires an OpenImageIO update:
342cc2633f
Photoshop sample files:
https://github.com/OpenImageIO/oiio-images
Brecht has some pending fixes to push for OIIO as well, so we may as
well wait to update our libraries.
What works:
===========
* 8bit images (with or without alpha)
* 16bits images (alpha discarded)
* Photoshop files saved with 'Maximum Compatibility'
* Cycles, Blender internal, BGE (and player)
Known limitations
(due to OIIO dependency):
=========================
* Images with less than 4 channels show a wrong thumbnail (bug may be in OIIO)
* Packed images are not supported
* We do not write PSD files.
Note: old Blenders have support for PSD via Quicktime library. But due
to license issues this was discontinued.
Many thanks for Brecht van Lommel for reviewing the patch, suggesting
multiple improvements and to help solving the alpha issue.
blender_add_lib now takes a separate include argument to suppress warnings in system includes (mostly ffmpeg & python).
also only build wm_apple.c on apple+carbon configuration.
globbing vs explicit is discussed here.
http://www.cmake.org/pipermail/cmake/2008-December/025694.html
Practical implications are:
- developers need to keep CMakeLists.txt files up to date.
- Users wont get strange linking errors if they build after a file is added, since CMake detects CMakeLists.txt is modified and automatically reconfigure.
