Change name to make navigation easier for beginner users. This should
more clearly hint at the use of this node to change the full geometry,
and not work with fields, and makes the name more consistent.
Differential Revision: https://developer.blender.org/D16396
While implementing T102289, I noticed that this node has
several solutions that are different from other, newer nodes.
- Explicitly set default values
- Use references
- Reduce the size of the node settings structure
Differential Revision: https://developer.blender.org/D16548
Instead of creating a new mesh from scratch, modify an existing mesh.
This allows us to keep derived caches for triangulation and bounds
alive more easily, and allows keeping materials and non-generic
attributes like vertex groups alive on the mesh.
It also has other performance benefits, since face and face corner
attributes aren't affected at all, and because of reduced overhead
from not allocating a new mesh.
Updating edge attributes is a bit more complicated now, since we
have to completely replace the arrays but keep the existing attribute
IDs around. The new mesh update tag is also slightly too specific IMO.
But I think both of those things will improve in the future because
of existing plans for further refactoring these areas:
- New attribute storage that gives pointer stability
- Further use and granularity of mesh update tagging that will
make the correct API more clear
Fixes T102711
Differential Revision: https://developer.blender.org/D16615
The main goal here is to move towards more self contained node
definitions. Previously, one would have to change `blenkernel` to
add a new node which is not necessary anymore. There is no need
for all these register functions to "leak out" of the nodes module.
Differential Revision: https://developer.blender.org/D16612
Based on discussion in D10891, this node isn't meant to be exposed and
may be removed in the future. The fact that it was exposed in search
menus was a mistake from the implementation of link-drag-search
and bdb5754147.
I explicitly removed the link drag search implementation, and added
(Legacy) to the node name which hides it from the add node search.
This patch warns the user that the compositor setup is not fully
supported when an unsupported node is used. The warning is displayed as
an engine warning overlay and in the node header itself.
See T102353.
Differential Revision: https://developer.blender.org/D16508
Reviewed By: Clement Foucault
This patch implements the Track Position node for the realtime
compositor.
Differential Revision: https://developer.blender.org/D16387
Reviewed By: Clement Foucault
`GeometrySet::has()` can return an empty component. It's more convenient
if it doesn't, since other code rarely wants to access an empty component.
The alternative would be adding an `is_empty()` check in the lazy function
for the viewer node, that would work fine too, for this case.
Differential Revision: https://developer.blender.org/D16584
Currently slicing a span clamped the final size so that it would be
within bounds of the input. However, in the vast majority of cases
that is already the case anyway, and we can use asserts to detect
when that assumption fails.
The clamping had a performance cost. On a test interpolating a boolean
attribute from 1 million curves to 4 million points, removing the
clamping saved about 10% of the time. That's an extreme case but
this probably slightly improves performance in other cases too.
Slicing is used a lot in the new curve code.
This commit introduces `slice_safe` which still does the clamping,
and uses it in the few places that needed it or where I wasn't
sure.
Use active object accessor, and then access data from the
object. There is no need to have an API call for shortcut
of all object fields.
Should be no functional change.
Instead of generating a dependency sorted node list whenever evaluating
texture or EEVEE/viewport shader nodes, use the existing sorted array
from the topology cache. This may be more efficient because the
algorithm isn't quadratic. It's also the second-to-last place to
use `node.runtime->level`, which can be removed soon.
Differential Revision: https://developer.blender.org/D16565
Rewrite the edge split code to operate directly on Mesh instead
of BMesh. This allows for the use of multi-threading and makes
the node around 2 times faster. Around 15% of the time is spent
just on the creation of the topology maps, so these being cached
on the mesh could cause an even greater speedup. The new node
gave identical results compared to the BMesh version on all the
meshes I tested it on (up to permutation of the indices).
Here are some of the results on a few simple test cases:
(Intel i7-7700HQ (8 cores) @ 2.800GHz , with 50% of edges selected)
| | 370x370 UV Sphere | 400x400 Grid | Suzanne 4 subdiv levels |
| ----- | ----------------- | -------------- | --------------------- |
| Mesh | 89ms | 111ms | 76ms |
| BMesh | 200ms | 276ms | 208ms |
Differential Revision: https://developer.blender.org/D16399
As part of T95966, this patch moves loose edge information out of the
flag on each edge and into a new lazily calculated cache in mesh
runtime data. The number of loose edges is also cached, so further
processing can be skipped completely when there are no loose edges.
Previously the `ME_LOOSEEDGE` flag was updated on a "best effort"
basis. In order to be sure that it was correct, you had to be sure
to call `BKE_mesh_calc_edges_loose` first. Now the loose edge tag
is always correct. It also doesn't have to be calculated eagerly
in various places like the screw modifier where the complexity
wasn't worth the theoretical performance benefit.
The patch also adds a function to eagerly set the number of loose
edges to zero to avoid building the cache. This is used by various
primitive nodes, with the goal of improving drawing performance.
This results in a few ms shaved off extracting draw data for some
large meshes in my tests.
In the Python API, `MeshEdge.is_loose` is no longer editable.
No built-in addons set the value anyway. The upside is that
addons can be sure the data is correct based on the mesh.
**Tests**
There is one test failure in the Python OBJ exporter: `export_obj_cube`
that happens because of existing incorrect versioning. Opening the
file in master, all the edges were set to "loose", which is fixed
by this patch.
Differential Revision: https://developer.blender.org/D16504
This separates the UV reverse sampling and the barycentric mixing of
the mesh attribute into separate multi-functions. This separates
concerns and allows for future de-duplication of the UV sampling
function if that is implemented as an optimization pass. That would
be helpful since it's the much more expensive operation.
This was simplified by returning the triangle index in the reverse
UV sampler rather than a pointer to the triangle, which required
passing a span of triangles separately in a few places.
* This patch just moves runtime data to the runtime struct to cleanup
the dna struct. Arguably, some of this data should not even be there
because it's very use case specific. This can be cleaned up separately.
* `miniwidth` was removed completely, because it was not used anywhere.
The corresponding rna property `width_hidden` is kept to avoid
script breakage, but does not do anything (e.g. node wrangler sets it).
* Since rna is in C, some helper functions where added to access the
C++ runtime data from rna.
* This size of `bNode` decreases from 432 to 368 bytes.
As described in T100004, add an output socket that returns true if the
attribute accessed by the node was already present in that context.
Initial patch by Edward (@edward88).
Differential Revision: https://developer.blender.org/D16316
I18n: make a few messages translatable
* Missing Paths * in the Presets menu when no preset exists yet.
The White Noise entry in the Add Node menu is the only one lacking a "Texture" suffix, which doesn't seem justified since the node itself is already called "White Noise Texture". Rename the entry its name can be extracted and used for the node--and for consistency.
New object material node names (Principled BSDF, Material Output) come from a preset node tree. The nodes' names need to be translated after creation.
Extract the "Fallback Tool" pie menu title.
Translate grease pencil options in the viewport overlay menu.
Ref T102030.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16345
When dragging out a boolean noodle, releasing and choosing
'switch > Switch' from the search popup, the code would mistakenly
search for 'Start' instead of 'Switch'.
Also the function called was not exactly the right one, leading to the
node being marked as invalid.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D16512
This commit adds a new "Image Info" node to retrieve various
information from an image like its width, height, and whether
it has an alpha channel. It is also possible to retrieve the FPS
and frame count of video files.
Differential Revision: https://developer.blender.org/D15042
* Support bidirectional type lookups. E.g. finding the base type of a
field was supported, but not the other way around. This also removes
the todo in `get_vector_type`. To achieve this, types have to be
registered up-front.
* Separate `CPPType` from other "type traits". For example, previously
`ValueOrFieldCPPType` adds additional behavior on top of `CPPType`.
Previously, it was a subclass, now it just contains a reference to the
`CPPType` it corresponds to. This follows the composition-over-inheritance
idea. This makes it easier to have self-contained "type traits" without
having to put everything into `CPPType`.
Differential Revision: https://developer.blender.org/D16479
