The `outliner.item_rename` operator needs to decide if it should rename the
active or the hovered item. Previously it checked if the event is a press
event, which is a hacky way of doing this and limit how the operator can be
used in the keymap.
Now use a operator option to let this be controlled on the keymap level.
Doesn't change any default behavior.
When using the sculpt filters, global automasking settings that affect
all brushes were ignored because the automasking system was not
implemented for filters, making filters and brushes react differently
to the global sculpt settings which creates confusion.
This makes all filter tools (mesh, cloth, color) use the same general
automasking settings and features as the brush tools. Filters will now
use the settings in the options panel to limit their effect.
This also removes the "use Face Sets" option from the Mesh filter code,
as it was duplicated from the automasking code just to have that
funcitonality. This is now handled by the regular automasking system.
The "Use Face Sets" option is still available in the cloth filter as that
option limits the action of the forces, not the displacement.
After this, it is possible to initialize the automasking system
independently from the StrokeCache and Brush settings, so it can also be
added to more tools and features in the future.
Fixes T81619
Reviewed By: dbystedt, sergey
Maniphest Tasks: T81619
Differential Revision: https://developer.blender.org/D9171
This adds an operator property to use the paint cursor radius and
position for the depth of the trimming shape created by the trimming
tools.
When enabled, the shape is located in the surface point when the gesture
started and it will have the depth of the cursor radius. When the cursor
is not over the mesh, the shape will be positioned at the center of the
depth of the whole object from the viewport camera.
Reviewed By: dbystedt, sergey
Differential Revision: https://developer.blender.org/D9129
This adds support for pen tilt in sculpt mode. For now, pen tilt is used
by tweaking the tilt strength property, which controls how much the pen
angle affects the sculpt normal. This is available in Draw, Draw Sharp,
Flatten, Fill, Scrape and Clay Strips brushes, but it can be enabled in
more tools later.
The purpose of this patch is to have a usable implementation of pen tilt
in a painting mode, so users can test and see in which hardware and
platforms this feature is supported and how well it works. If it works
ok, more tools and features that rely on pen tilt can be implemented,
like brushes that blend between two deformations depending on the angle.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8893
The voxel remesher was using the voxel size to limit the shrink-wrap
projection distance. Now that distance is increased to help preserving
more detail on hard surface edges.
Reviewed By: pablodp606
Differential Revision: https://developer.blender.org/D6204
With all the work on DNA defaults for 2.91, it's nice to expose this
convenient operator. This was already hardcoded in the UI code to the
backspace key, adding it to the keymap instead will make the shortcut
automatically show in the button right click menu.
Differential Revision: https://developer.blender.org/D9219
This patch enables property search for all tabs in the property editor.
To make interaction faster, if the editor's current tab doesn't have a
result, the current tab changes to the next tab that has a match.
This patch implements basic code that only searches panels.
While we could run the existing "single tab" property search for every
tab, that would also do everything else related to the layout pass,
which would be less efficient, and maybe more complicated to maintain.
The search match status for every current tab of the property editor is
stored in a runtime bitfield and them displayed later by dimming icons
in the tab selector panel to the left. Using `BLI_bitmap` properly in
the runtime struct required moving it to `buttons_intern.h` and
adding a small API to access the search filter instead.
To make sure the editor isn't influenced by anything that happens while
building the layout for other tabs, most of the context is duplicated
and the new search is run in the duplicated editor.
Note that the tool settings tab works slightly different than the other
tabs, so I've disabled searching it for this commit. That would be a
relatively simple improvement, but would just require a bit of
refactoring of existing code.
Differential Revision: https://developer.blender.org/D8859
The "Geometry start & End" panel was grayed when using an object
to create the curve bevel. It should only be grayed out in this case
when no object is chosen in the "Bevel" subpanel.
Both the default theme and Blender Light have been updated.
Blender Light also includes automatically generated colors based on the
default theme that were not set previously.
Python 3.7x added support for module `__getattr__` & `__dir__`.
Make use of this for operator access,
previously these were module like classes.
No functional changes, this is mostly to use a type which is expected,
rather than faking the type with a class instance.
After rBeb911610d05 there are some differences in how the layout code
decides whether to add decorators (aka animation buttons). Whether or
not that logic is correct, it's nice to specify that we don't want them
turned on in this popover.
Move position of Alerts and Progress bar back to the center of the Statusbar.
Differential Revision: https://developer.blender.org/D9118
Reviewed by Brecht Van Lommel
The overlay options in the image/uv editor is hidden in side panels and menus. Sometimes this panel is even hidden, while still useful.
The goal of this task is to introduce an overlay pop-over just like the overlay-popover of the 3d viewport.
Popover has
* UV Stretching (only available in the UV mode, when active object mode is a mesh and in OB_EDIT mode)
* Display As (only available in the UV mode, when active object mode is a mesh and in OB_EDIT mode)
* Show Modified (only available in the UV mode, when active object mode is a mesh and in OB_EDIT mode)
* Show UV Edges (including opacity slider; available UV, View, Paint, when active object mode is a mesh and in OB_EDIT mode)
* Udim tiles when no image is available.
Like the 3d viewport, there will be a editor toggle to enable/disable the overlays
For compatibility reasons the RNA properties are added to both the `SpaceImage.uv_editor` amd `SpaceImage.overlay`. On DNA level they are still stored in the SpaceImage. only new properties are added to the SpaceImageOverlay struct. During the next major release we could remove these options from `SpaceImage.uv_editor`. This should be noted in the Python section of release notes.
Reviewed By: Julian Eisel, Pablo Vazquez
Differential Revision: https://developer.blender.org/D8890
Follow the MLA style, agreed upon in T79589. This means "from" within UI
labels should be lowercase.
Differential Revision: https://developer.blender.org/D8345
The settings in these popups are not animateable, so also turn off
property decorate. And also use better widths in order to fit the
full text.
Differential Revision: https://developer.blender.org/D9060
Aligning the columns removes unecessary white space.
The same as in the D8480 / rBb2e0c8f902fa.
Differential Revision: https://developer.blender.org/D9111
Avoid overwriting user-chosen `SACTION_SLIDERS` flag when switching the
Dope Sheet editor to Shape Key mode. The Shape Key mode now ignores the
flag, and always shows the sliders.
The obvious limitation is that you can't hide the sliders in the Shape
Key editor anymore
Reviewed By: looch, sybren
Differential Revision: https://developer.blender.org/D9121
If this doesnt work in a particular mode, it would be better to indicate
that in the Overlay popup.
Differential Revision: https://developer.blender.org/D8981
For other areas in Blender that have a toggle and related settings,
we put a popover with the settings right next to the toggle. This
combination is nice because it organizes the settings without making
interaction slower. It also makes the settings more discoverable since
they're right next to the toggle.
Differential Revision: https://developer.blender.org/D8537
This enables a union boolean mode for the trimming gestures tools which
adds geometry to the mesh instead of cutting it.
It also adds a Join mode, which adds the geometry directly without
using a boolean operation.
Depending if you plan to use dyntopo or not, it is useful to have both
options available.
This is using the full depth of the object from the camera view for the
depth of the geometry, but options for controlling the trimming depth in
all modes are going to be added in later patches
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D9066
- Density, interpolation and slicing options in Volume Object's
Viewport Display are now not aligned to each other as they are not
closely related.
- Changed the enum property for slicing ('Method') to a boolean
property 'Slice' and added a sub-panel for slicing options under
the 'Viewport Display' panel in Volume Object and Fluid for better
clarity.
- Renamed `axis_slice_method` to `use_slice` in the python API for
Volume Object and Fluid.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9097
Multiple related issues:
* `view_zoomdrag_exec()` required `view_zoomdrag_init()` to be called first to
set up data. Can now easily be done in the `_exec()` function as well though.
* Because of that the operators could not be called in an `EXEC_` context (e.g.
`EXEC_REGION_WIN`).
* With "Zoom to Mouse Position" enabled, zooming from a menu or script would
zoom to the mouse position. That should only happen if the operators are
called directly in the editor.
This simulation area mode moves the active area with the brush. When
enabled, the cloth brush has no restrictions on stroke length, area or
mesh vertex count.
In order to work, this enables PBVH nodes dynamically for simulation as
the stroke location moves and builds the constraints for new nodes
during the stroke. When a node is not inside the simulated area, all the
constraints that were created for it and vertex collisions are not
computed. The simulation limits falloff areas and constraints tweaking
control how the simulated and no simulated nodes blend.
Reviewed By: sergey, zeddb
Differential Revision: https://developer.blender.org/D8726
The adds a new option to simplify volumes in the viewport.
The setting can be found in the Simplify panel in the render properties.
Volume objects use OpenVDB grids, which are sparse. For rendering,
we have to convert sparse grids to dense grids (for now). Those require
significantly more memory. Therefore, it's often a good idea to reduce
the resolution of volumes in the viewport.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9040
Ref T73201.
This tool projects all vertices to the right of the plane defined by the
line gesture towards the plane. By doing this, this tool can create cuts
and plane surfaces in the mesh without modifying the geometry or using
boolean operations, so it is much faster than bisecting the mesh for
cases where the geometry was going to be remeshed afterwards.
Added as experimental as it does not have icon.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D9021
This adds support for line gesture to SculptGestureContext and
implements a Mask Line tool, which affects everything to the right of a plane
defined by the straightline gesture.
For this to work, a new WM_gesture_straightline_oneshot_modal is needed
which only runs exec when the gesture is over.
Added as experimental as it does not have icon.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D8722
The operator has some problems with Undo, so better put it in
experimental for now.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D9007
This fixes and reverts commit c7287ffaec
Due to hardcodded keys, the modifier for auto contrain plane did not
work with custom keymaps and was in conflict with other keyitems.
Its usability is also confusing since it cannot be used without
`MOD_PRECISION`
But instead of removing it, it is better to make this modifier compatible
with custom keymaps and keep the conflict.
Caused by still having 'texture_opacity' in the preests and the preset
operator (but this was removed in the 2.83 rewrite).
Maniphest Tasks: T81081
Differential Revision: https://developer.blender.org/D8990
Script create_msix_package.py will download the ZIP file
from the given URL. It will create the MSIX package
with the version number and publisher ID given.
Strongly recommended are the path to a valid PFX file, and the
password to use that PFX file. These are needed for signing
the resulting MSIX package. The signing step is optional though,
but the resulting MSIX package cannot be installed outside of the
Microsoft Store
Example
set VERSION=2.83.2.0
set URL=https://download.blender.org/release/Blender2.83/blender-2.83.2-windows64.zip
set PUBID=CN=PUBIDHERE
set PFX=X:\path\to\cert.pfx
set PFXPW=pwhere
python create_msix_package.py --version %VERSION% --url %URL% --publisher %PUBID% --pfx %PFX% --password %PFXPW%
Requirements:
* Python default from the Microsoft Store should do (3.8)
* requests can be installed with `pip install requests`
Note that for an LTS release that gets uploaded to its own LTS application release
in the store you need to specify the `--lts` switch on the command-line to the script.
Upon completion there will be a file with the
name blender-2.83.2.0-windows64.msix. In case PFX file and its password were
given on the command line MSIX package will also be signed for the Microsoft Store.
Related Wiki page: https://wiki.blender.org/wiki/Process/Release_On_Windows_Store
Reviewed By: jbakker
Maniphest Tasks: T77348, T79356
Differential Revision: https://developer.blender.org/D8310
