Actually we only have a Python API that allows to change the max jumps value.
The patch also allows non programmers to change the maximum numbers of jumps.
Reviewers: panzergame, sybren, campbellbarton, lordloki, moguri, agoose77
Reviewed By: lordloki, moguri
Projects: #game_engine
Differential Revision: https://developer.blender.org/D1302
This patch adds icons to the physic collision shapes.
Adding a new capsule shape 'mesh_capsule' icon which represent the shape better then the metaballs icon.
And replace the metaballs icon for the Blender collision shape.
{F206628}
Reviewers: moguri, sybren, agoose77, lordloki, mont29, panzergame, campbellbarton
Reviewed By: lordloki, panzergame, campbellbarton
Projects: #game_engine, #game_ui, #user_interface
Differential Revision: https://developer.blender.org/D1403
The game.velocity_{min,max} and game.angular_velocity_{min,max} object
RNA properties did not use a subtype, and thus velocity was always
displayed as radians or blender units instead of the configured units.
Reviewed by: campbellbarton
Angular velocity clamping was missing from the BGE. It is implemented
similarly to the linear velocity clamping. It is needed to be able to
drive physical simulations of systems that have a limited rotational
speed.
Reviewed by: campbellbarton, panzergame, ton
Differential Revision: https://developer.blender.org/D1365
This calls are not strictly speaking needed for the old dependency graph, but
due to more granular nature of upcoming depsgraph more actions requires update
of relations of IDs.
On the one hand this extra tags could be wrapped with if() statements, but on
the other hand it makes sense to keep tag in sync so it's clear if some issue
is caused by missing/extra tag or by depsgraph itself.
This change introduces a new hysteresis parameter that it will be added
or subtracted to/from the LOD distance to avoid popping when a LOD
object moves close to the LOD transition continuously.
Then, we have the following:
- a new LOD Hysteresis setting per scene (default 10%) which is located
in Scene context --> Level of Detail panel. This scene parameter also
will active/deactive the scene hysteresis.
- and a new LOD Hysteresis setting per object (default 10%) which is
located in Object context --> Levels of Detail panel. The LOD hysteresis
setting per object (if active) will overwrite the hysteresis setting per
scene value.
For the new blends: the hysteresis setting per scene would be active by
default and the per object would be inactive by default.
For the old blends: both hysteresis settings (per scene and per object)
would be inactive by default. A quick way to take advantage of this
feature for old blends would be to activate the hysteresis parameter in
the scene context -> Level of Detail panel
Reviewers: campbellbarton, kupoman, moguri
Reviewed By: kupoman, moguri
Subscribers: nonamejuju, lordodin
Differential Revision: https://developer.blender.org/D957
This changes BKE's fitting code to use `BKE_camera_params_compute_viewplane` instead of
`BKE_camera_view_frame`. This allows that code to work with orthographic projection too.
Also, two funcs were added to rna's Object, to resp. get the projection matrix of that
object (mostly useful for cameras and lamps objects), and return position this object
should be to see all (to fit) a given set of points.
Reviewers: campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D961
The getter of this matrix (actually, `BKE_object_matrix_local_get()`) was only correct
in case of pure-object parenting, bone parenting and such did not gave valid results.
Also cleaned up a bit setter code, was using as temp storage ob->obmat itself,
which is supposed to be a world matrix!
Reviewers: campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D958
This merge-commit brings in a number of new features and workflow/UI improvements for
working with Grease Pencil. While these were originally targetted at improving
the workflow for creating 3D storyboards in Blender using the Grease Pencil,
many of these changes should also prove useful in other workflows too.
The main highlights here are:
1) It is now possible to edit Grease Pencil strokes
- Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions
to enter "Stroke Edit Mode". In this mode, many common editing tools will
operate on Grease Pencil stroke points instead.
- Tools implemented include Select, Select All/Border/Circle/Linked/More/Less,
Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete.
- Proportional Editing works when using the transform tools
2) Grease Pencil stroke settings can now be animated
NOTE: Currently drivers don't work, but if time allows, this may still be
added before the release.
3) Strokes can be drawn with "filled" interiors, using a separate set of
colour/opacity settings to the ones used for the lines themselves.
This makes use of OpenGL filled polys, which has the limitation of only
being able to fill convex shapes. Some artifacts may be visible on concave
shapes (e.g. pacman's mouth will be overdrawn)
4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing
has been added which draws strokes as a series of screen-aligned discs.
While this was originally a partial experimental technique at getting better
quality 3D lines, the effects possible using this technique were interesting
enough to warrant making this a dedicated feature. Best results when partial
opacity and large stroke widths are used.
5) Improved Onion Skinning Support
- Different colours can be selected for the before/after ghosts. To do so,
enable the "colour wheel" toggle beside the Onion Skinning toggle, and set
the colours accordingly.
- Different numbers of ghosts can be shown before/after the current frame
6) Grease Pencil datablocks are now attached to the scene by default instead of
the active object.
- For a long time, the object-attachment has proved to be quite problematic
for users to keep track of. Now that this is done at scene level, it is
easier for most users to use.
- An exception for old files (and for any addons which may benefit from object
attachment instead), is that if the active object has a Grease Pencil datablock,
that will be used instead.
- It is not currently possible to choose object-attachment from the UI, but
it is simple to do this from the console instead, by doing:
context.active_object.grease_pencil = bpy.data.grease_pencil["blah"]
7) Various UI Cleanups
- The layers UI has been cleaned up to use a list instead of the nested-panels
design. Apart from saving space, this is also much nicer to look at now.
- The UI code is now all defined in Python. To support this, it has been necessary
to add some new context properties to make it easier to access these settings.
e.g. "gpencil_data" for the datablock
"active_gpencil_layer" and "active_gpencil_frame" for active data,
"editable_gpencil_strokes" for the strokes that can be edited
- The "stroke placement/alignment" settings (previously "Drawing Settings" at the
bottom of the Grease Pencil panel in the Properties Region) is now located in
the toolbar. These were more toolsettings than properties for how GPencil got drawn.
- "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a
suggestion for an earlier discussion on developer.blender.org
- By default, the painting operator will wait for a mouse button to be pressed
before it starts creating the stroke. This is to make it easier to include
this operator in various toolbars/menus/etc. To get it immediately starting
(as when you hold down DKEy to draw), set "wait_for_input" to False.
- GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor
- Toolbar panels have been added to all the other editors which support these.
8) Pie menus for quick-access to tools
A set of experimental pie menus has been included for quick access to many
tools and settings. It is not necessary to use these to get things done,
but they have been designed to help make certain common tasks easier.
- Ctrl-D = The main pie menu. Reveals tools in a context sensitive and
spatially stable manner.
- D Q = "Quick Settings" pie. This allows quick access to the active
layer's settings. Notably, colours, thickness, and turning
onion skinning on/off.
Along with some minor cleanup and simplifications.
Reviewers: campbellbarton
Subscribers: sergey
Differential Revision: https://developer.blender.org/D903
too crowded.
UVs in the same layer can be used for many images. It used to be
possible to filter UV faces based on the image, but this is impossible
now due to the way the system works, so I added an option to allow
filtering UVs based on active material index.
Rationale on using option and not being smart here (options are bad tm)
is that for some workflows, such as preserving image space by using the
same image for many materials, people might want to turn this off.
This commit merges the code in the pie-menu branch.
As per decisions taken the last few days, there are no pie menus
included and there will be an official add-on including overrides of
some keys with pie menus. However, people will now be able to use the
new code in python.
Full Documentation is in http://wiki.blender.org/index.php/Dev:Ref/
Thanks:
Campbell Barton, Dalai Felinto and Ton Roosendaal for the code review
and design comments
Jonathan Williamson, Pawel Lyczkowski, Pablo Vazquez among others for
suggestions during the development.
Special Thanks to Sean Olson, for his support, suggestions, testing and
merciless bugging so that I would finish the pie menu code. Without him
we wouldn't be here. Also to the rest of the developers of the original
python add-on, Patrick Moore and Dan Eicher and finally to Matt Ebb, who
did the research and first implementation and whose code I used to get
started.
The previous fix 162d6c73e3 has been cancelled because it caused a
problem that mesh deform cages and so on mess up the preview. To avoid
the problem, viewport doesn't show mesh object if its draw type is
bounding box or wireframe.
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D375
This was storing the original object matrix, which builds on the
assumption that obmat is modified during dupli construction, which is a
bad hack.
Now the obmats are still modified, but this only happens outside of the
dupli system itself and the original ("omat") is stored as local
variables in the same place where the obmat manipulation takes place.
This is easier to follow and avoids hidden hacks as much as possible.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D254
This adds an ImageUser to such empties with all the typical settings.
Reviewed By: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D108
