Show all memory-related byte size strings calculated with a base of 1024.
Differential Revision: https://developer.blender.org/D5714
Reviewed by Brecht Van Lommel
This adds per-platform change so Windows users will see file sizes calculated with a base of 1024.
Differential Revision: https://developer.blender.org/D5714
Reviewed by Brecht Van Lommel
The sculpt automasking feature assigns a factor to each vertex before starting the stroke. This can be used for isolating disconnected meshes, masking cavities, mesh boundary edges or creating topological falloffs.
This commit implements automasking in all brushes and topology automasking without topology falloff.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5645
Without this patch there could only be one superimposed icon
and the operators were hard coded for the button types.
This keeps the previous, sort of predefined extra icons working in a
rather generic way, but allows adding specific ones for specific case
through `UI_but_extra_operator_icon_set()`.
Reviewed by: Campbell Barton
Differential Revision: https://developer.blender.org/D5730
The mask filter operator modifies the whole paint mask. In includes multiple operations like smooth, grow or contrast accessible from a pie menu.
The dirty mask generator is similar to Dirty Vertex Colors, but it generates a paint mask. It can be used to mask cavities in the sculpt.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5496
The main switch was not checked and the function was doing all calculations, but the data was not used. This makes all slower than expected because the user had the Onion Skinning disabled, but internally was running.
The mesh filter tool applies a deformation to all vertices in the mesh at the same time. It includes multiple deformation modes and the option to lock the deformation axis.
This commit also includes the FilterCache, which is needed in some new operators and tools.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5513
Now the fade layer uses the same logic used to fade objects and also is available in all modes.
Reviewers: mendio, pepeland
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D5707
This patch implements the paper "Regularized Kelvinlets: Sculpting Brushes based on Fundamental Solutions of Elasticity" https://graphics.pixar.com/library/Kelvinlets/paper.pdf
It includes grab, biscale grab, triscale grab, scale and twist.
All deformation modes are accessible under the same tool. This helps to keep the code organized and it should not make any difference to the user when a better brush management system is implemented.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5634
Was a problem in the versioning code from rBbaaa89a0bc54, since the
TexMapping struct could already be freed and node->storage could already
be set to NULL (if a file with the new mapping node [saved from (2, 81,
8) or newer] is opened in a blender version prior to (2, 81, 8) and
saved from there again).
Reviewers: brecht
Maniphest Tasks: T69663
Differential Revision: https://developer.blender.org/D5723
This provides an API to access structs
with their members set to default values:
- DNA_struct_default_get(name)
- DNA_struct_default_alloc(name)
Currently this is only used for scene & view shading initialization,
eventually it can be used for RNA defaults and initializing
DNA struct members on file reading.
This brush is similar to the draw brush but it deforms the mesh from the original coordinates. When used with the sharper curve presets it has a much more pleasant crease/cut behavior than any of the other brushes. This is useful for creating cloth wrinkles, stylized hair or hard surface edges.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5530
Preparing for the bigger changes which will be related on passing
dependency graph to various callbacks which need it.
Differential Revision: https://developer.blender.org/D5725
Before this the timer API was relying on using a callback API to do
initialization when new file is loaded. This isn't how rest of Blender
works and it gets in a way because callbacks API is to be move to the
BKE level.
Use explicit call to timer API from where the file is loaded.
Makes the numpad + and - type of shortcuts to increase/decrease the file
number suffix work in the upper and lower bar of the file browser.
Had to add keymap handlers to the execute region for this to work.
The previous method only worked in simple cases where faces were
surrounded by non-manifold edges.
Now face regions surrounded by non-manifold edges are marked as interior.
Starting with regions most perpendicular to the surrounding geometry.
Resolves T68401
When the file browser was opened (from a temporary window since the file
browser redesign) using a button in the UI, under certain conditions
moving the mouse would trigger files to be dragged.
Note that this has been an issue before the new file browser design was
introduced, although under slightly different conditions.
Steps to reproduce:
* With factory settings, press F12
* Open a different image in the appearing Image Editor (not Render
Result)
* Make sure the window is not maximized
* Press N to open the side bar, open Image tab
* Click the folder icon there to change the image
* Change to thumbnail display type in the appearing file browser
* Cancel, click the folder icon again
Moving the mouse now would start dragging files in most cases.
The same issue could be reproduced in a similar way when installing
lights/MatCaps or HDRIs through Preferences -> Lights -> Install...
Caused by ab823176d3.
Steps to reproduce were:
* Open Preferences
* Open file browser through Lights -> Install (doesn't matter which)
* Close browser through the window controlls
The window was freed earlier, but still referenced by new handler
context storage.
This partially reverts commit 0b2d1badec
Post increment can deep-copy for C++ iterators, while in my own checks
GCC was able to optimize this to get the same output,
better follow C++ best practice and use pre-increment for iterators.
Bugs were: (1) needed an epsilon test in CCW test in order to
handle new costraint edge that intersects an existing point
but only within epsilon; (2) the "valid bmesh" output mode
sometimes left a face that included outside frame point.
Steps to reproduce were:
* Ensure //Render//->//Display Mode// is //New Window//
* F12
* In the opened Image Editor, Alt+S to save the image
* Save the image
The saving would fail silently.
Issue was that wm_handler_op_context() would fail to find the correct
area to activate, as the wrong window was active in context. So allow
overriding this window and do so when creating the file-select handler.
To fix this, we just scramble the halton sequence by multiplying by a large
prime number.
It seems to work fine in practice.
We also tried Sobol sequence but it has a less uniform pattern for low
number of sample.
Fix T68594 Eevee: Soft shadows causing flickering in animation and temporal AA in scenes
Blender UI Layout API allows supplying parameters to operators via
button definitions. If an operator behavior strongly depends on its
parameters, it may be difficult to write a tooltip that covers all
of its operation modes. Thus it is useful to provide a way for the
operator to produce different descriptions based on the input info.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D5709
File Browser image thumbnails get just a contrasting outline and no shadow.
Differential Revision: https://developer.blender.org/D5708
Reviewed by Brecht Van Lommel
Before, it was only possible to fade the active object. The new option allows to fade all non gpencil selected object. This is a common request by artists.
{F7719513}
Reviewers: mendio, pepeland
Reviewed By: mendio
Differential Revision: https://developer.blender.org/D5704
Instead of fixed size, `IMM_BUFFER_SIZE` is adjustable now. The internal buffer can expand if there is a need a bigger buffer. All other behaviors are still the same.
Reviewed By: fclem, #gpu_viewport
Differential Revision: https://developer.blender.org/D5570
We basically duplicate the height map branch plugged into the bump node,
and tag each node in each branch as dx/dy/ref using `branch_tag`.
Then we add a one pixel offset on the texture coordinates if the node is
tagged as dx or dy.
The dx/dy branches are plugged into (new) hidden sockets on the bump node.
This match cycles bump better but have a performance impact. Also, complex
nodetrees can now become instruction limited and not compile anymore.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5531
