Add Multiply, Divide, Project, Reflect, Distance, Length, Scale, Snap,
Floor, Ceil, Modulo, Fraction, Absolute, Minimum, and Maximum operators
to the Vector Math node. The Value output has been removed from operators
whose output is a vector, and the other way around. All of those removals
has been handled properly in versioning code.
The patch doesn't include tests for the new operators. Tests will be added
in a later patch.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5523
The Normal vector socket in the Normal node wasn't drawn properly and
couldn't be controlled. Additionally, the socket name was drawn over it.
This happened because the socket had a default value of a zero vector.
To fix this, we set the default value to the unit vector `(0, 0, 1)`.
Moreover, we don't draw the UI name if the subtype is `PROP_DIRECTION`.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5503
If the option is enabled, the output is clamped to the target range.
The target range is [To Min, To Max]. The option is enabled by default.
The clamp option is implemented in EEVEE by linking to the `clamp_value`
GLSL function. And it is implemented in Cycles using a graph expand
function.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5477
Change the default drawing method of vector sockets to use a column layout.
This allows more interactive use of nodes and avoids the one or two clicks
needed to edit vector sockets in the old default component layout.
Developers may still use the component layout by flaging the socket with the
`SOCK_COMPACT` socket flag. For now, we choose to draw the SSS scale vector
of the Principled and SSS nodes in a compact form because they don't require
much interactivity.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5458
The first issue was that we were still working around a Xorg bug that
has been solved since a very long time:
https://bugs.freedesktop.org/show_bug.cgi?id=22515
The second issue was that the global "confirm on release for mouse
clicks" was used for keyboard shortcuts as well.
There are two aspects to the problem:
- Dependency graph update for compositor preview was missing
updates flush.
Apparently, update for new frame style of update will take
care of flushing, but not the update tagged style of update.
This goes to a legacy dependency graph and is to be changed
at some point, but not so close to the release.
- Movie clips were missing from the compositor dependency graph.
This fixes part of T66519.
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5256
Cheap tip: anything that is not "Camel Case" and/or that is more than
a few words long should use `TIP_` translation, not `IFACE_` one.
Also added several missing strings (including the one reported in D5056
by Jean First (@robbott), thanks).
This is probably just one of the related issues.
Root of the problem was that compositor job was using original scene and node
tree for compositing. It is not guaranteed to have all the evaluated data.
Switched compositor job to use it's own render-pipeline-like dependency graph
which has everything evaluated in it.
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D4998
The root of the problem goes to the fact that node tree copying
uses source tree and nodes for a temporary storage.
This makes it so multiple dependency graphs can not be reliably
evaluated from different threads if they are using same original
node tree.
Solved by doing the following:
- Commonly used tree copying function (which is used by library
manager) keeps source tree, nodes and sockets untouched.
- All the related areas (like node tree's callback) now have
const qualifier on the input.
- Areas which needs to have those temporary pointers assigned are
now using explicit function.
Would be really cool to get rid of those temporary pointers
completely, but this is a bit tricky due to hairy nature of the
code. Can happen any time now though: is easy enough to generalize
the new pointers mapping.
Note that this change is only intended to solve the crash.
The fact that icons shouldn't be updated on playback will be fixed
as a separate change.
Reviewers: brecht, fclem
Reviewed By: brecht, fclem
Subscribers: brecht, fclem
Differential Revision: https://developer.blender.org/D5002
Use drag-only keyamp to adjust gizmos which use drag motion
to change a value. By default gizmos still activate on press.
This allows for left click select to be used with transform
without the gizmos getting in the way.
Even though this isn't necessary for right click select
it allows click events to pass through and be used by tools
which can be useful.
Resolves T63996
Don't allow changing it for painted images until they have been saved, similar
to sidebar panels. This could be solved better, for now the important thing is
not to lose changes.
The goal is to prevent assignment of temporary or evaluated meshes
to objects from the main database.
Majority of the change is actually related on passing reports around.
On a positive side there are more error prints which can become more
visible to scripters.
There are still possible further improvements in the related areas.
For example, disable user counting for evaluated ID datablocks when
assignment happens. But can also happen later on as a separate
improvement.
Reviewers: brecht, campbellbarton, mont29
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D4884
Note that the same issue actually showed without a frame node, when
trying to click-drag on a socket on its 'inside node' part, you would get
same behavior.
Only solution I can see here is to prevent Node selection to go on when
user clicks on one of its sockets, there is no way afaik to make
drag-from-socket to start if we keep select-node operator running
modal, since both operators (NODE_OT_select and NODE_OT_link) use the
same shortcut, if select (which is checked first, being a Tool) returns
modal, then event is considered handled it seems, even though
Passthrough is also returned...
Left-click select broke that behavior, since it puts both action and
select buttons on the same physical mouse button...
To support this behavior again, we have to split selection process in
two steps, hence make it modal... While I remain rather skeptical about
that global design decision, and complexity it adds to many UI/UX areas,
this solution ends up being OK-ish I think.
Thanks to @brecht for some final tweaks on the patch.
Cycles lights now use strength and color properties of the light outside
of the shading nodes, just like Eevee. The shading nodes then act as a
multiplier on this, and become optional unless textures, fallof or other
effects are desired.
Backwards compatibility is not exact, as we can't be sure which renderer
the .blend was designed for or even if it was designed for a single one.
If the render engine in the active scene is set to Cycles, lights are
converted to ensure overall light strength remains the same, and removing
unnecessary shader node setups that only included a single emission node.
If the engine is set to Eevee, we increase strength to remove the automatic
100x multiplier that was there to match Cycles.
Differential Revision: https://developer.blender.org/D4588
Cycles now uses the color space on the image datablock, and uses OpenColorIO
to convert to scene linear as needed. Byte images do not take extra memory,
they are compressed in scene linear + sRGB transfer function which in common
cases is a no-op.
Eevee and workbench were changed to work similar. Float images are stored as
scene linear. Byte images are compressed as scene linear + sRGB and stored in
a GL_SRGB8_ALPHA8 texture. From the GLSL shader side this means they are read
as scene linear, simplifying the code and taking advantage of hardware support.
Further, OpenGL image textures are now all stored with premultiplied alpha.
Eevee texture sampling looks a little different now because interpolation
happens premultiplied and in scene linear space.
Overlays and grease pencil work in sRGB space so those now have an extra
conversion to sRGB after reading from image textures. This is not particularly
elegant but as long as engines use different conventions, one or the other
needs to do conversion.
This change breaks compatibility for cases where multiple image texture nodes
were using the same image with different color space node settings. However it
gives more predictable behavior for baking and texture painting if save, load
and image editing operations have a single color space to handle.
Differential Revision: https://developer.blender.org/D4807
Refactor a bit node selection code, mostly in the socket selection in
one place 'extend' logic usage was inverted, deselection of other
sockets/nodes was not working properly.
Also now make node active when selecting a socket, this makes more sense
and makes the NODE_OT_link_viewer macro much more useful (this is the
only user of the 'socket select' feature currently, afaics).
This is a continuation of rB7fdffd735ff24, where I separated the
e.g. frame number drawing from scrollers internally.
This patch changes the API, so that space draw handlers
have to draw these numbers explicitely.
This greatly simplifies the scrollers API for all spaces
that just need scrollers without any frame numbers.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D4747
Previously only a fixed bounding box could be used.
This was not flexible enough.
T63193 will benefit from this refactor.
Reviewers: brecht, campbellbarton
On file read we need to update group nodes in case the group they refer to
has changed its inputs and outputs. This had O(n^2) time complexity and was
updating all datablocks even if they did not change.
Add a callback to allow custom node editors to draw their own
backdrop.
Differential Revision: https://developer.blender.org/D4709
Reviewed by: JacquesLucke
Each space had separate operators, duplicating logic.
Use RNA properties instead so adding the ability to toggle other
region types (floating redo region for eg) doesn't need to have an
extra operator per space type.
It's also nicer to show a check-box for something which can be toggled.
