settings
Stabilized ImBuf just needs to use the same colorspace and alpha
settings as the original one.
Maniphest Tasks: T76698
Differential Revision: https://developer.blender.org/D7713
Surrounding includes with an 'extern "C"' block is not necessary anymore.
Also that made it harder to add any C++ code to some headers, or include headers
that have "optional" C++ code like `MEM_guardedalloc.h`.
I tested compilation on linux and windows (and got help from @LazyDodo).
If this still breaks compilation due to some linker error, the header containing
the symbol in question is probably missing an 'extern "C"' block.
Differential Revision: https://developer.blender.org/D7653
This patch enables TBB as the default task scheduler. TBB stands for Threading Building Blocks and is developed by Intel. The library contains several threading patters. This patch maps blenders BLI_task_* function to their counterpart. After this patch we can add more patterns. A promising one is TBB:graph that can be used for depsgraph, draw manager and compositor.
Performance changes depends on the actual hardware. It was tested on different hardwares from laptops to workstations and we didn't detected any downgrade of the performance.
* Linux Xeon E5-2699 v4 got FPS boost from 12 to 17 using Spring's 04_010_A.anim.blend.
* AMD Ryzen Threadripper 2990WX 32-Core Animation playback goes from 9.5-10.5 FPS to 13.0-14.0 FPS on Agent 327 , 10_03_B.anim.blend.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D7475
Tasks: move priority from task to task pool {rBf7c18df4f599fe39ffc914e645e504fcdbee8636}
Tasks: split task.c into task_pool.cc and task_iterator.c {rB4ada1d267749931ca934a74b14a82479bcaa92e0}
Differential Revision: https://developer.blender.org/D7385
Mpving utils from idcode to idtype proved to be somewhat painful for
some reasons, but now all looks good.
Had to add a fake/empty shell for the special snowflake too,
`ID_LINK_PLACEHOLDER/INDEX_ID_NULL`...
When RGB images or BW images are converted to a GPU texture and color
space conversion was needed the images were read incorrectly.
This patch checks the correct amount of channels in the image and uses
that as the correct pixel stride.
To prepare for D6811 small changes were needed.
we can no longer undefine near/far since the windows
headers use those extensively.
some of the imbuf files need to include the windows
headers explicitly to make sure it builds.
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
This adds the `Half Float Precision` option in the image property panel.
This option is only available on float textures and is enabled by default.
Adding a flag inside the imbuf (IB_halffloat) on load is done for EXR and PSD formats that can store half floating point (16bits/channels).
The option is then not displayed in this case and forced.
Related task T73086
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6891
- Unlock property range.
- Use triangular noise to keep perceptual noise error more uniform.
Remap range to preserve perceptual intensity.
- Center noise distribution around 0 for GPU implementation because of
rounding.
- Do dithering after merging overlays.
Effect of using triangular noise is not really noticeable if you don't use
really low bitdepth. But doing a test in the shader were we artificially
reduce the bitdepth (`col = (col * 16) / 16;`) reveals the real difference.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6850
This is a more correct fix to the issue Brecht was fixing in D6600.
While the fix in that patch worked fine for linking it broke ASAN
runtime under some circumstances.
For example, `make full debug developer` would compile, but trying
to start blender will cause assert failure in ASAN (related on check
that ASAN is not running already).
Top-level idea: leave it to CMake to keep track of dependency graph.
The root of the issue comes to the fact that target like "blender" is
configured to use a lot of static libraries coming from Blender sources
and to use external static libraries. There is nothing which ensures
order between blender's and external libraries. Only order of blender
libraries is guaranteed.
It was possible that due to a cycle or other circumstances some of
blender libraries would have been passed to linker after libraries
it uses, causing linker errors.
For example, this order will likely fail:
libbf_blenfont.a libfreetype6.a libbf_blenfont.a
This change makes it so blender libraries are explicitly provided
their dependencies to an external libraries, which allows CMake to
ensure they are always linked against them.
General rule here: if bf_foo depends on an external library it is
to be provided to LIBS for bf_foo.
For example, if bf_blenkernel depends on opensubdiv then LIBS in
blenkernel's CMakeLists.txt is to include OPENSUBDIB_LIBRARIES.
The change is made based on searching for used include folders
such as OPENSUBDIV_INCLUDE_DIRS and adding corresponding libraries
to LIBS ion that CMakeLists.txt. Transitive dependencies are not
simplified by this approach, but I am not aware of any downside of
this: CMake should be smart enough to simplify them on its side.
And even if not, this shouldn't affect linking time.
Benefit of not relying on transitive dependencies is that build
system is more robust towards future changes. For example, if
bf_intern_opensubiv is no longer depends on OPENSUBDIV_LIBRARIES
and all such code is moved to bf_blenkernel this will not break
linking.
The not-so-trivial part is change to blender_add_lib (and its
version in Cycles). The complexity is caused by libraries being
provided as a single list argument which doesn't allow to use
different release and debug libraries on Windows. The idea is:
- Have every library prefixed as "optimized" or "debug" if
separation is needed (non-prefixed libraries will be considered
"generic").
- Loop through libraries passed to function and do simple parsing
which will look for "optimized" and "debug" words and specify
following library to corresponding category.
This isn't something particularly great. Alternative would be to
use target_link_libraries() directly, which sounds like more code
but which is more explicit and allows to have more flexibility
and control comparing to wrapper approach.
Tested the following configurations on Linux, macOS and Windows:
- make full debug developer
- make full release developer
- make lite debug developer
- make lite release developer
NOTE: Linux libraries needs to be compiled with D6641 applied,
otherwise, depending on configuration, it's possible to run into
duplicated zlib symbols error.
Differential Revision: https://developer.blender.org/D6642
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
Extend options are currently stored per curve. This was not clearly
communicated to the user and they expected this to be a setting per
CurveMapping.
This change will move the option from `Curve` to `CurveMapping`. In
order to support this the API had to be changed.
BPY: CurveMap.evaluate is also moved to CurveMapping.evaluate what
breaks Python API. Cycles has been updated but other add-ons have
not. After release of 2.81 we can merge this to master and adapt
the add-ons.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D6169
Skip building proxy if directory can not be created.
Crash happens, when setting custom dir to location of source file itself.
This results in attempt to create directory with the same name as source file.
Differential Revision: https://developer.blender.org/D6148
Reviewed By: sergey
Update image undo to store buffers for each step:
- Undo buffers share tiles to avoid using too much memory.
- Undo support for different sized buffers
allowing operations such as crop or resize.
- Paint tiles have been split into separate API/storage.
- Painting speed wont be impacted significantly
since storing the extra tiles is done after the stroke & only
for the first undo step.
Resolves T61263, see D5939 for details.
Since our ffmpeg is built with openjpeg support and thus can decode jpeg
2000 (in both J2K and JP2 codec flavors as well as high bitdepths), added
these extensions to the supported list.
Also IMB_ispic > IMB_ispic_type > imb_is_a_jp2 was only testing for jp2,
now do both jp2/j2k.
Reviewers: brecht
Maniphest Tasks: T70276
Differential Revision: https://developer.blender.org/D5909
The problematic video from T68091 clearly has an invalid stream duration
(it would be 55 centuries long if interpreted at 30 FPS, and given that
it was recorded with an Android 9 device, it's unlikely that recording
started that long ago). I've added a heuristic to check the stream
duration against the container duration; if the stream is more than 4x
longer than the container, Blender now falls back to the container
duration.
We could use MIN(stream duration, container duration), but there might
be video files out there where the container duration is less precise
than the stream duration; they are measured in different units of time
(microseconds for the container vs. frames for the stream).
Includes a unit test for the above heuristic.
Reviewed by: jbakker
Differential revision: https://developer.blender.org/D5853
This was introduced in FFmpeg lavf 55.1.100 in 2013. For systems that are
still on LibAV or older FFmpeg there is a fallback implementation that
performs the same guess as we did before in `av_get_r_frame_rate_compat()`.
There is now a clearer distinction between `video_stream` (the stream itself)
and `video_stream_index` (its index), and no more repetition of accessing
the same item of an array. This also makes the code a bit more readable in
preparation for an upcoming functional change.
This partially reverts commit 0b2d1badec
Post increment can deep-copy for C++ iterators, while in my own checks
GCC was able to optimize this to get the same output,
better follow C++ best practice and use pre-increment for iterators.
With Blender 2.80 we introduced a more flexible matcap system. One
change we did was to multiply the matcap with the base color that was
shaded. As matcaps contains diffuse and specular lighting in a single
texture this lead to rendering artifacts. Artists were complaining that
everything looked to metalic.
We now support a separate `diffuse` and `specular` pass for matcaps.
`shaded_color = diffuse_light * base_color + specular_light`
For matcaps to support this feature they need to be multilayer openexr
files with 2 renderpasses (named `diffuse` and `specular`). In the future
we can change this to first pass/second pass in stead of this naming
convention.
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D5335
