- Added a new Brush datablock, only used by image paint, but intended
to be used in texture paint, vertex paint, weight paint and sculpt
mode also.
- Being a datablock, these brushes can be saved, appended and linked.
They have a fake user by default, to make sure they are saved even if
not selected.
Image Painting:
- Replaced the img module with C code in imagepaint.c
- Airbrush is no longer a separate tool, but rather an option that can
be used for soften, smear and clone also.
- Blend modes mix, add, subtract, multiply, darken and lighten have been
added, code taken directly from vertex paint.
Note to project files maintainers:
- The img module was removed from SCons and Makefiles, and this should
be done in other build systems also. I'll wait to remove the module
from cvs, to not break compilation.
- New UI element: the "Curve Button".
For mapping ranges (like 0 - 1) to another range, the curve button can be
used for proportional falloff, bone influences, painting density, etc.
Most evident use is of course to map RGB color with curves.
To be able to use it, you have to allocate a CurveMapping struct and pass
this on to the button. The CurveMapping API is in the new C file
blenkernel/intern/colortools.c
It's as simple as calling:
curvemap= curvemapping_add(3, 0, 0, 1, 1)
Which will create 3 curves, and sets a default 0-1 range. The current code
only supports up to 4 curves maximum per mapping struct.
The CurveMap button in Blender than handles allmost all editing.
Evaluating a single channel:
float newvalue= curvemapping_evaluateF(curvemap, 0, oldval);
Where the second argument is the channel index, here 0-1-2 are possible.
Or mapping a vector:
curvemapping_evaluate3F(curvemap, newvec, oldvec);
Optimized versions for byte or short mapping is possible too, not done yet.
In butspace.c I've added a template wrapper for buttons around the curve, to
reveil settings or show tools; check this screenie:
http://www.blender.org/bf/curves.jpg
- Buttons R, G, B: select channel
- icons + and -: zoom in, out
- icon 'wrench': menu with tools, like clear curve, set handle type
- icon 'clipping': menu with clip values, and to dis/enable clipping
- icon 'x': delete selection
In the curve button itself, only LMB clicks are handled (like all UI elements
in Blender).
- click on point: select
- shift+click on point: swap select
- click on point + drag: select point (if not selected) and move it
- click outside point + drag: translate view
- CTRL+click: add new point
- hold SHIFT while dragging to snap to grid
(Yes I know... either one of these can be Blender compliant, not both!)
- if you drag a point exactly on top of another, it merges them
Other fixes:
- Icons now draw using "Safe RasterPos", so they align with pixel boundary.
the old code made ints from the raster pos coordinate, which doesn't work
well for zoom in/out situations
- bug in Node editing: buttons could not get freed, causing in memory error
prints at end of a Blender session. That one was a very simple, but nasty
error causing me all evening last night to find!
(Hint; check diff of editnode.c, where uiDoButtons is called)
Last note: this adds 3 new files in our tree, I did scons, but not MSVC!
- Sunday merger with bf-blender
- Foundations for new Node editor in Blender, generic framework that can
be used for Material/Texture, Compositing, Logic or maybe even Sequencer.
Note: this doesn't do anything yet, nor save! Is just to get this nice
in CVS now. :)
- removed mesh_deform (merge into mesh_modifier)
- switch python lattice_apply function to use object_apply_deform,
this isn't exactly equivalent but the python system shouldn't
have been calling that deep into the kernel anyway.
New feature: Modifier stack
- added Object.modifiers (list of ModifierData elements)
- added DNA_modifier_types.h
o contains type definition for the file data for the various
modifier types
- added BKE_modifier.h
o contains modifierType_get_info (access to modifier type registry)
o structs and defines for runtime modifier usage
- updated mesh_calc_modifiers to evaluate modifier stack (note that
for the time being it also evaluates the old style modifiers so files
should load and work as normal).
- add file handling modifier code (todo: don't replicate on object copy)
- add modifier stack UI code (lives in object panel)
Only real new feature at the moment is that you can apply lattices and
curves *after* a subdivision surface which was never possible before.
Todo:
- DEP graph updating does not work correctly yet, so you generally have
to tab cycle to see results.
- editmode calculation does not use modifier stack.
- bug fixes (there must be a few in there somewhere)
Aim was to get a total refresh of the animation system. This
is needed because;
- we need to upgrade it with 21st century features
- current code is spaghetti/hack combo, and hides good design
- it should become lag-free with using dependency graphs
A full log, with complete code API/structure/design explanation
will follow, that's a load of work... so here below the list with
hot changes;
- The entire object update system (matrices, geometry) is now
centralized. Calls to where_is_object and makeDispList are
forbidden, instead we tag objects 'changed' and let the
depgraph code sort it out
- Removed all old "Ika" code
- Depgraph is aware of all relationships, including meta balls,
constraints, bevelcurve, and so on.
- Made depgraph aware of relation types and layers, to do smart
flushing of 'changed' events. Nothing gets calculated too often!
- Transform uses depgraph to detect changes
- On frame-advance, depgraph flushes animated changes
Armatures;
Almost all armature related code has been fully built from scratch.
It now reveils the original design much better, with a very clean
implementation, lag free without even calculating each Bone more than
once. Result is quite a speedup yes!
Important to note is;
1) Armature is data containing the 'rest position'
2) Pose is the changes of rest position, and always on object level.
That way more Objects can use same Pose. Also constraints are in Pose
3) Actions only contain the Ipos to change values in Poses.
- Bones draw unrotated now
- Drawing bones speedup enormously (10-20 times)
- Bone selecting in EditMode, selection state is saved for PoseMode,
and vice-versa
- Undo in editmode
- Bone renaming does vertexgroups, constraints, posechannels, actions,
for all users of Armature in entire file
- Added Bone renaming in NKey panel
- Nkey PoseMode shows eulers now
- EditMode and PoseMode now have 'active' bone too (last clicked)
- Parenting in EditMode' CTRL+P, ALT+P, with nice options!
- Pose is added in Outliner now, with showing that constraints are in
the Pose, not Armature
- Disconnected IK solving from constraints. It's a separate phase now,
on top of the full Pose calculations
- Pose itself has a dependency graph too, so evaluation order is lag free.
TODO NOW;
- Rotating in Posemode has incorrect inverse transform (Martin will fix)
- Python Bone/Armature/Pose API disabled... needs full recode too
(wait for my doc!)
- Game engine will need upgrade too
- Depgraph code needs revision, cleanup, can be much faster!
(But, compliments for Jean-Luc, it works like a charm!)
- IK changed, it now doesnt use previous position to advance to next
position anymore. That system looks nice (no flips) but is not well
suited for NLA and background render.
TODO LATER;
We now can do loadsa new nifty features as well; like:
- Kill PoseMode (can be option for armatures itself)
- Make B-Bones (Bezier, Bspline, like for spines)
- Move all silly button level edit to 3d window (like CTRL+I = add
IK)
- Much better & informative drawing
- Fix action/nla editors
- Put all ipos in Actions (object, mesh key, lamp color)
- Add hooks
- Null bones
- Much more advanced constraints...
Bugfixes;
- OGL render (view3d header) had wrong first frame on anim render
- Ipo 'recording' mode had wrong playback speed
- Vertex-key mode now sticks to show 'active key', until frame change
-Ton-
Works as follows;
- press the 'show bake settings' button (no space left... :)
- define start/end frame for bake, and an interval step.
The baked result interpolates nicely (Bspline, 4 keys) so in general a
step size of 2 or 3 still gives OK results.
- Press "BAKE". This will do a full animation + playback. Press ESC if it
you don't want it.
Once Baked, the BAKE button becomes a FREE BAKE. As reminder the softbody
buttons get blocked with error() menu.
This saves OK in a file. Renders any frame, including fields and moblur.
You can also set a "Timeoffs" for the softbody. And yes, this should be
in the NLA once... :)
NOTE! With this commit, files saved with the old (first commit) version by
Jens Ole won't read the settings back... he stored all sofbody variables in
Object, which was moved to a new struct when I did my first commit on SB
(over a month ago)
Also note that I moved particle deflecting & softbody to a new include.
(MVert,MFace,etc) off into DNA_meshdata_types.h, to isolate areas
of source that actually edit mesh *data* vs. areas that just edit
mesh object information.
this is part 1 of the UI makeover. It has:
- menu system from Matt integrated
- buttons drawing from Matt
- generic button panel system implemented
- converted displaybuttons (not the rest yet)
- cleaned up a lot in drawing spaces itself, to make it aligned and pixel exact.
- cleaned loads of little compiler warnings, protos...
still a lot of work needed, will all be in next week i hope!
(warn: 2 new c files! butspace.c and buttons_scene.c)
source/blender/makesdna/intern/dna.c
This should fix the segfault at startup for non-x86 systems (tested on
linux/ppc and linux/x86). I would be glad if someone could check
if it works on other systems as well.
sgefant
