E.g. when opening the File Browser from the Preferences window, it would
be the child of the main window the Preferences belong to. Now it can be
a child of the Preferences window itself.
The File Browser always stays on top of its parent window. Which avoids
some issues with OS window management, see T76418 and T72693.
Also removes a now unnecessary workaround to move the child window back
to the front after closing the file browser (opening the file browser
would move the main window and the file browser to the front).
Fixes T76418, T72693.
That one was a bit more complicated, and is still only partial refactor
(ultimately we want to have a foreach_id callback in SpaceType itself I
think...).
Splits up wm_xr.c into multiple files in their own folder:
source/blender/windowmanager/xr. So this matches how the message bus and
gizmo code have their own folder and files.
This allows better structuring and should make the code scale better.
I rather do this early on than to wait until we end up with a single,
huge file.
Also improves a bit how data is prepared and updated for drawing.
NOTE: While most of the milestone 1 goals are there, a few smaller features and
improvements are still to be done.
Big picture of this milestone: Initial, OpenXR-based virtual reality support
for users and foundation for advanced use cases.
Maniphest Task: https://developer.blender.org/T71347
The tasks contains more information about this milestone.
To be clear: This is not a feature rich VR implementation, it's focused on the
initial scene inspection use case. We intentionally focused on that, further
features like controller support are part of the next milestone.
- How to use?
Instructions on how to use this are here:
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/How_to_Test
These will be updated and moved to a more official place (likely the manual) soon.
Currently Windows Mixed Reality and Oculus devices are usable. Valve/HTC
headsets don't support the OpenXR standard yet and hence, do not work with this
implementation.
---------------
This is the C-side implementation of the features added for initial VR
support as per milestone 1. A "VR Scene Inspection" Add-on will be
committed separately, to expose the VR functionality in the UI. It also
adds some further features for milestone 1, namely a landmarking system
(stored view locations in the VR space)
Main additions/features:
* Support for rendering viewports to an HMD, with good performance.
* Option to sync the VR view perspective with a fully interactive,
regular 3D View (VR-Mirror).
* Option to disable positional tracking. Keeps the current position (calculated
based on the VR eye center pose) when enabled while a VR session is running.
* Some regular viewport settings for the VR view
* RNA/Python-API to query and set VR session state information.
* WM-XR: Layer tying Ghost-XR to the Blender specific APIs/data
* wmSurface API: drawable, non-window container (manages Ghost-OpenGL and GPU
context)
* DNA/RNA for management of VR session settings
* `--debug-xr` and `--debug-xr-time` commandline options
* Utility batch & config file for using the Oculus runtime on Windows.
* Most VR data is runtime only. The exception is user settings which are saved
to files (`XrSessionSettings`).
* VR support can be disabled through the `WITH_XR_OPENXR` compiler flag.
For architecture and code documentation, see
https://wiki.blender.org/wiki/Source/Interface/XR.
---------------
A few thank you's:
* A huge shoutout to Ray Molenkamp for his help during the project - it would
have not been that successful without him!
* Sebastian Koenig and Simeon Conzendorf for testing and feedback!
* The reviewers, especially Brecht Van Lommel!
* Dalai Felinto for pushing and managing me to get this done ;)
* The OpenXR working group for providing an open standard. I think we're the
first bigger application to adopt OpenXR. Congratulations to them and
ourselves :)
This project started as a Google Summer of Code 2019 project - "Core Support of
Virtual Reality Headsets through OpenXR" (see
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/).
Some further information, including ideas for further improvements can be found
in the final GSoC report:
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/Final_Report
Differential Revisions: D6193, D7098
Reviewed by: Brecht Van Lommel, Jeroen Bakker
Part of https://developer.blender.org/T74429.
There's a chance that this causes some issues becaue in some cases we
change from getting the window from context to getting it from somewhere
else.
This also makes `IDP_CopyProperty` the "opposite"
of `IDP_FreeProperty`, which is what I'd expect.
Two refactoring steps:
* rename IDP_FreeProperty to IDP_FreePropertyContent
* new IDP_FreeProperty function that actually frees the property
Reviewers: brecht
Differential Revision: https://developer.blender.org/D4872
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
Blender defaults data-file was loading it's own key-map
with a capital 'B', the preset would load it again w/ a lowercase name.
Use lowercase key-map names.
This refactors loading of key configurations to clear and refill existing
ones, rather than adding a new one and then removing the old one.
This fixes broken loading of non-default configurations after recent changes,
and prepares for future changes to make it possible to dynamically change
key configurations based on user preferences.
It was a bit odd that the scene was stored per window but not the view
layer. The reasoning was that you would use different view layers for
different tasks. This is still possible, but it's more predictable to
switch them both explicitly, and with child window support manually
syncing the view layers between multiple windows is no longer needed
as often.
* Main windows show a topbar and statusbar, and select a workspace and
scene. They are created with Window > New Main Window.
* Child windows do not show a topbar or statusbar. These follow the
workspace and scene of their parent main window. Created with Window >
New Window or View > Duplicate Area into New Window.
* The purpose of this change is to support multi monitor setups where you
just want to put more editors on the other monitors. Without multiple
topbars and statusbars, working within a single workspace and scene.
Creating multiple main windows is intended to be a concious choice to
do different tasks in different workspaces and scenes.
* Note these changes do not currently affect how the operating system
treats the windows.
* When changing the workspace, the layout in all child windows changes.
This makes sense if we consider child windows to be just a way to
extend the main window across more monitors. In some case it may be
useful to keep the same layout though, we can add an option for this
depending on user feedback.
This removes OperatorRepeatContextHandle, from 5f6c45498c
since we now only have redo in the area an operator is executed in.
These values could be invalid and crashed in some cases.
For Blender 2.8 we had to be compatible with very old OpenGL versions, and
triple buffer was designed to work without offscreen rendering, by copying
the the backbuffer to a texture right before swapping. This way we could
avoid redrawing unchanged regions by copying them from this texture on the
next redraws. Triple buffer used to suffer from poor performance and driver
bugs on specific cards, so alternative draw methods remained available.
Now that we require newer OpenGL, we can have just a single draw method
that draw each region into an offscreen buffer, and then draws those to
the screen. This has some advantages:
* Poor 3D view performance when using Region Overlap should be solved now,
since we can also cache overlapping regions in offscreen buffers.
* Page flip, anaglyph and interlace stereo drawing can be a little faster
by avoiding a copy to an intermediate texture.
* The new 3D view drawing already writes to an offscreen buffer, which we
can draw from directly instead of duplicating it to another buffer.
* Eventually we will be able to remove depth and stencil buffers from the
window and save memory, though at the moment there are still some tools
using it so it's not possible yet.
* This also fixes a bug with Eevee sampling not progressing with stereo
drawing in the 3D viewport.
Differential Revision: https://developer.blender.org/D3061
== Main Features/Changes for Users
* Add horizontal bar at top of all non-temp windows, consisting out of two horizontal sub-bars.
* Upper sub-bar contains global menus (File, Render, etc.), tabs for workspaces and scene selector.
* Lower sub-bar contains object mode selector, screen-layout and render-layer selector. Later operator and/or tool settings will be placed here.
* Individual sections of the topbar are individually scrollable.
* Workspace tabs can be double- or ctrl-clicked for renaming and contain 'x' icon for deleting.
* Top-bar should scale nicely with DPI.
* The lower half of the top-bar can be hided by dragging the lower top-bar edge up. Better hiding options are planned (e.g. hide in fullscreen modes).
* Info editors at the top of the window and using the full window width with be replaced by the top-bar.
* In fullscreen modes, no more info editor is added on top, the top-bar replaces it.
== Technical Features/Changes
* Adds initial support for global areas
A global area is part of the window, not part of the regular screen-layout.
I've added a macro iterator to iterate over both, global and screen-layout level areas. When iterating over areas, from now on developers should always consider if they have to include global areas.
* Adds a TOPBAR editor type
The editor type is hidden in the UI editor type menu.
* Adds a variation of the ID template to display IDs as tab buttons (template_ID_tabs in BPY)
* Does various changes to RNA button creation code to improve their appearance in the horizontal top-bar.
* Adds support for dynamically sized regions. That is, regions that scale automatically to the layout bounds.
The code for this is currently a big hack (it's based on drawing the UI multiple times). This should definitely be improved.
* Adds a template for displaying operator properties optimized for the top-bar. This will probably change a lot still and is in fact disabled in code.
Since the final top-bar design depends a lot on other 2.8 designs (mainly tool-system and workspaces), we decided to not show the operator or tool settings in the top-bar for now. That means most of the lower sub-bar is empty for the time being.
NOTE: Top-bar or global area data is not written to files or SDNA. They are simply added to the window when opening Blender or reading a file. This allows us doing changes to the top-bar without having to care for compatibility.
== ToDo's
It's a bit hard to predict all the ToDo's here are the known main ones:
* Add options for the new active-tool system and for operator redo to the topbar.
* Automatically hide the top-bar in fullscreen modes.
* General visual polish.
* Top-bar drag & drop support (WIP in temp-tab_drag_drop).
* Improve dynamic regions (should also fix some layout glitches).
* Make internal terminology consistent.
* Enable topbar file writing once design is more advanced.
* Address TODO's and XXX's in code :)
Thanks @brecht for the review! And @sergey for the complaining ;)
Differential Revision: D2758
- Undo that changes modes currently asserts,
since undo is now screen data.
Most likely we will change how object mode and workspaces work
since it's not practical/maintainable at the moment.
- Removed view_layer from particle settings
(wasn't needed and complicated undo).
- Use a single undo history for all operations.
- UndoType's are registered and poll the context to check if they
should be used when performing an undo push.
- Mode switching is used to ensure the state is correct before
undo data is restored.
- Some undo types accumulate changes (image & text editing)
others store the state multiple times (with de-duplication).
This is supported by checking UndoStack.mode `ACCUMULATE` / `STORE`.
- Each undo step stores ID datablocks they use with utilities to help
manage restoring correct ID's.
Needed since global undo is now mixed with other modes undo.
- Currently performs each undo step when going up/down history
Previously this wasn't done, making history fail in some cases.
This can be optimized to skip some combinations of undo steps.
grease-pencil is an exception which has not been updated
since it integrates undo into the draw-session.
See D3113
Allows for each workspace to have it's own add-ons on display.
Filtering for: Panels, Menus, Keymaps & Manipulators.
Automatically applies to add-ons at the moment.
Access from workspace, toggled off by default
once enabled, add-ons can be white-listed.
See D3076
