* Using the job system for physics baking is not yet in the near future, so here's some good old console based progress info to all point cache based physics baking.
* The info contains current total bake time, baking time for the current frame, and a simple estimate of completion time.
* The info is only shown if the estimated total time for the bake is higher than one minute, so quick bakes don't suffer any performance hits due to console printing.
- fix mistake with grease pencil UI (&& was intended but & used).
- use (void) rather then () across _all_ blenders code.
- a few minor edits, don't shadow stack variables in roll calculation & avoid running memset() for VBO vertex map.
* External caches didn't load for smoke straight away. Smoke caches store all necessary info in every file, so no need to try to look for an info file.
also minor functional changes
- OBJECT_OT_make_links_data() type property is now assigned to the operator property (so popup menu can find it)
- removing BG image now returns cancelled if no image is removed.
* Viscoelastic springs between the fluid particles can simulate all kinds
of viscous and elastic substances, such as jelly and honey. This is
achieved by creating springs dynamically between neighboring particles
and adjusting their rest length based on stretching/compression.
* This nearly completes the currently intended functionality for particle
fluids. The last missing thing is a surfacing extraction algorithm,
which is needed for a proper representation of a sph fluid.
* I also cleaned up and renamed some of the fluid parameters to make the
ui a bit easier to understand.
* One addition to the patch is an option to use "initial rest length" for
the springs, which uses the lengths between the particles at the time of
spring creation as the spring rest lengths instead of interaction radius/2.
This makes the fluid keep it's original shape better (good for very
viscoelastic materials), but can create large density differences inside
the fluid (not really physically correct for a fluid).
* Viscoelastic springs are stored in point cache as extra data.
* Not strictly necessary right now, but better for future.
* Struct data (only boids at the moment) is now written as structs (with dna) so they work between 64 and 32 bit machines too.
* I've getting bad feelings about the point cache index_array for a while (cause for this bug too), so from now on memory cache uses a simple binary search directly on the index data to handle queries to specific data points.
* This is a bit slower than just checking from a dedicated array, but it's much less error prone, uses less memory and makes the code more readable too, so it's not a tough choice.
* Renamed children to "simple" and "interpolated" as this is
easier to explain and more descriptive than "from particles"
and "from faces".
* Also shuffled the child ui around a bit to make it clearer.
* Child seed parameter allows to change the seed for children
independent of the main seed value.
* Long hair mode for interpolated children:
- Making even haircuts was impossible before as the child
strand lengths were even, but their root coordinates were
not similar in relation to the parent strands.
- The "long hair" option uses the tips of the parent strands
to calculate the child strand tips.
* Hair parting options:
- Hair parting can now be calculated dynamically on the fly
when in 2.49 there was a cumbersome way of using emitter mesh
seams to define parting lines.
- For long hair parting can be created by a tip distance/root
distance threshold. For example setting the minimum threshold
to 2.0 creates partings between children belonging to parents
with tip distance of three times the root distance
((1+2)*root distance).
- For short hair the parting thresholds are used as angles
between the root directions.
* New kink parameters:
- Kink flatness calculates kink into a shape that would have
been achieved with an actual curling iron.
- Kink amplitude clump determines how much the main clump value
effects the kink amplitude.
- The beginning of kink is now smoothed to make the hair look
more natural close to the roots.
* Some bugs fixed along the way too:
- Child parent's were not determined correctly in some cases.
- Children didn't always look correct in particle mode.
- Changing child parameters caused actual particles to be
recalculated.
* Also cleaned up some deprecated code.
All in all there should be no real changes to how old files look
(except perhaps a bit better!), but the new options should make
hair/fur creation a bit more enjoyable. I'll try to make a video
demonstrating the new stuff shortly.
* Removed the unused fuctions spotted by Campbel.
* Removed the gotos to make Ton happy.
* Added better debug prints to disk cache operations.
* Fixed a memory unmap error that seemed to happen on a test file.
* Massive reorganization of pointcache code, things are now cleaner than ever.
* For all but smoke the cache is first written to memory when using disk cache and after that written to disk in one operation. This allows less disk operations and the possibility to compress the data before writing it to disk.
* Previously only smoke cache could be compressed, now the same options exist for other physics types too (when using disk cache). For now the default compression option is still "no compression", but if there aren't any problems this can be set to "light compression" as it's actually faster than no compression in most cases since there's less data to write to the disk. Based on quick tests heavy compression can reduce the file size down to 1/3rd of the original size, but is really slow compared to other options, so it should be used only if file size is critical!
* The pointcache code wasn't really 64bit compatible (for disk cache) until now, so this update should fix some crashes on 64bit builds too. Now all integer data that's saved to disk uses 32 bit unsigned integers, so simulations done on 64bit should load fine on 32bit machines and vice versa. (Important disk cache simulations made on 64bit builds should be converted to memory cache in a revision before this commit).
* There are also the beginnings of extradata handling code in pointcache in anticipation of adding the dynamic springs for particle fluids (the springs need to be stored as extradata into point cache).
* Particles were being read from the cache with a slightly wrong framerate. In most cases this probably wasn't noticeable, but none the less the code is now correct in every way.
* Small other fixes here and there & some cosmetic changes to cache panel, but over all there should be no functional changes other than the new disk cache compression options.
* This whole re-organization also seems to fix bug #25436 and hopefully shouldn't introduce any new ones!
* Pointcache code was quite ugly looking and complicated, so here are mostly just cosmetic adjustments, but some improved logic also.
* Slight cleanup of pointcache ui too.
* Shouldn't have any functional changes what so ever, so poke me right away if something seems off.
* Depsgraph wasn't updated properly for smoke flow collision object dependencies.
* Smoke also wasn't properly using the actual emission frame of the flow particles.
* There was a lot of bloated logic in some parts of particle code so this fix turned into a small scale cleanup operation.
** As a result particle updating and cache usage should be a bit more stable too.
only tags the ID and does the actual flush/update delayed, before the next
redraw. For objects the update was already delayed, just flushing wasn't
yet.
This should help performance in python and animation editors, by making
calls to RNA property update quicker. Still need to add calls in a few
places where this was previously avoided due to bad performance.
* Separate caches were causing quite a lot of problems both in principle and practice.
* For example it doesn't really make sense to have different frame ranges for normal and high resolution smoke, but this was fully possible before.
* Also to fully bake the smoke you had to do a "Bake All Dynamics", which completely defeats the whole point of the feature!
* As a result of this change the smoke cache usage is much much simpler and less error prone.
* This is quite a big change, but hopefully there should be less rather than more problems as a result :)
Some other related changes:
* Changing the cache name now works for disk caches properly too, it now just renames the cache files so should be faster too!
* Smoke is now always forced to disk cache with step 1 on file load as there were some strange cases where smoke was trying to use memory cache.
* Disabled smoke debug prints from console.
* Disabled changing smoke parameters when smoke is baked.
Note to users: The unfortunate side effect of this is that old high resolution simulations have to be baked again, but in return you get much better and more logical functionality. Sorry none the less!
* WM_timecursor is broken somehow, so pointcache baking makes the cursor disappear.
* For user this seems like blender has frozen although it's just a matter of no progress indication.
* This fix just sets the default "busy" cursor for the whole duration of baking and reports progress in the console.
* If there's and easy fix for this then it should probably be done straight away, but I want to re-implement baking using the job system soon anyways, so a proper fix for this is not strictly necessary.
Both stored the filename of the blend file, but G.sce stored the last opened file.
This will make blender act differently in some cases since a relative path to the last opened file will no longer resolve (which is correct IMHO since that file isnt open and the path might not even be valid anymore).
Tested linking with durian files and rendering to relative paths when no files is loaded however we may need to have some operators give an error if they are used on the default startup.blend.
- removed deprecated bitmap arg from IMB_allocImBuf (plugins will need updating).
- mostly tagged UNUSED() since some of these functions look like they may need to have the arguments used later.
