tile cache code in imbuf, but it is not hooked up to the render engine.
Imbuf module: some small refactoring and removing a lot of unused or old code
(about 6.5k lines).
* Added a ImFileType struct with callbacks to make adding an file format type,
or making changes to the API easier.
* Move imbuf init/exit code into IMB_init()/IMB_exit() functions.
* Increased mipmap levels from 10 to 20, you run into this limit already with
a 2k image.
* Removed hamx, amiga, anim5 format support.
* Removed colormap saving, only simple colormap code now for reading tga.
* Removed gen_dynlibtiff.py, editing this is almost as much work as just
editing the code directly.
* Functions removed that were only used for sequencer plugin API:
IMB_anim_nextpic, IMB_clever_double, IMB_antialias, IMB_gamwarp,
IMB_scalefieldImBuf, IMB_scalefastfieldImBuf, IMB_onethird, IMB_halflace,
IMB_dit0, IMB_dit2, IMB_cspace
* Write metadata info into OpenEXR images. Can be viewed with the command
line utility 'exrheader'
For the image tile cache code, see this page:
http://wiki.blender.org/index.php/Dev:2.5/Source/Imaging/ImageTileCache
Now it's a bit more robust, tagging images with profiles when they're loaded,
which then get interpreted later on by conversion functions. Just Linear RGB
and sRGB profiles at the moment, same as before.
This commit fixes Martin's problem with EXRs and Multilayer images loading/
saving too dark, and it also makes the sequence editor work correctly with it too.
Also fixes:
[#19647] gamma correction with color management is reset when resetting Curve
[#19454] 2.5: Dither does not work when Color management is enabled
- revert tiff load/save to use standard libtiff (to ensure 100% colorimetry & alpha interpretation across platforms)
- include patch #18720 to fix load of libtiff dynlib (if present on system)
- replace libtiff by calls to Cocoa services to load/save tiff files
(Libtiff, dynamically linked is not distributed with OS X, and would have had to be shipped for all four architectures)
The imb_cocoaLoadImage & imb_cocoaSaveImage are generic towards the bitmap format, and thus can handle TIFF, GIF, JPG, JP2000, BMP and raw camera formats (read-only for these), even if today only TIFF is used as the other formats are already handled.
- CMake updated
- scons updated (Thx to Jens Verwiebe)
* removed radiosity render code, DNA and RNA (left in radio render pass options), we'll get GI to replace this probably, better allow baking to vertex colors for people who used this.
* removed deprecated solid physics library, sumo integrations and qhull, a dependency
* removed ODE, was no longer being build or supported
* remove BEOS and AMIGA defines and references in Makefiles.
Please read:
http://www.blender3d.org/cms/Imaging.834.0.html
Or in short:
- adding MultiLayer Image support
- recoded entire Image API
- better integration of movie/sequence Images
Was a whole load of work... went down for a week to do this. So, will need
a lot of testing! Will be in irc all evening.
standard for film scanning, 10 bits/channel and logarithmic. DPX is
derived from Cineon as the ANSI/SMPTE industry standard.
DPX supports 16 bits color/channel, linear as well as logarithmic.
Code has been gratefully copied from CinePaint and was integrated in
Blender by Joe Eagar.
According to CinePaint's dev Robin Rowe the DPX code defaults to log
colorspace. Can't find in the code clues yet how to enable/disable that.
However, tests with write/read of DPX seems to show no visible loss by
log conversion code. Might be because it uses the entire 16 bit range...
CinePaint dpx files have been succesfully imported in a Quantel IQ HD/2K
finishing/grading set without problem, so for now I guess we can
use it! :)
Changes in code: added tests for image magic numbers before entering
the actual reading code. Prevents error prints, and makes it faster too.
(Note; this because Blender doesn't check for extensions, but calls
reading functions on every file until one accepts it. :)
Basically the check for a type of jpeg was messed up.
I added a imb_is_a_jpeg function since I was working on that bit and
it makes it a little more similar to the other filetypes.
I also changed a switch statement that had the same loop for all
cases, just moved the loop outside of the switch statement.
Kent
causing building without OPENEXR to fail. (Hopefully this doesn't mess up
current scons stuff, shouldn't but I haven't tested it after latest
changes in scons)
(I also cleaned up the Makefile a tad so it didn't check twice for WITH_OPENEXR)
Kent
Credits go to Gernot Ziegler, who originally coded EXR support, and to
Austin Benesh for bringing it further. Kent Mein provided a lot of code
for integrating float buffers in Blender imbuf and ImBuf API cleanup,
and provided Make and Scons and static linking.
At this moment; the EXR libraries are a *dependency*, so you cannot get
the Orange branch compiled without having OpenEXR installed. Get the
(precompiled or sources) stuff from www.openexr.com. Current default is
that the headers and lib resides in /user/local/
Several changes/additions/fixes were added:
- EXR code only supported 'half' format (16 bits per channel). I've added
float writing, but for reading it I need tomorrow. :)
- Quite some clumsy copying of data happened in EXR code.
- cleaned up the api calls already a bit, preparing for more advanced
support
- Zbuffers were saved 16 bits, now 32 bits
- automatic adding of .exr extensions went wrong
Imbuf:
- added proper imbuf->flags and imbuf->mall support for float buffers, it
was created for *each* imbuf. :)
- found bugs for float buffers in scaling and flipping. Code there will
need more checks still
- imbuf also needs to be verified to behave properly when no 32 bits
rect exists (for saving for example)
TODO:
- support internal float images for textures, backbuf, AO probes, and
display in Image window
Hope this commit won't screwup syncing with bf-blender... :/
To enable dynamic tiff support.
I had to fix some of the logic in the fileselect box for icons,
I also expanded the patch to look in various default locations for
a dynamic libtiff.so/libtiff.dll
and look at the env variable BF_TIFF_LIB if it can't find it automatically.
If unable to load the library it prints a message about setting BF_TIFF_LIB
to the console.
I haven't been able to test it on a lot of platforms but hopefully it
will just work ;) I added the files to scons but have not had a chance to
test that as well.
Kent
This adds Radiance HDR image file support. So now at least we can save
the 'fbuf' (4x32 bits float colors) in Blender.
It doesn't change anything for internal support in imbuf for floa colors,
so when reading .hdr files it still converts it to 32 bits RGBA.
As an extra I've added that saving images with F3 now also adds the
optional extension, when the F10 "Extensions" option is set.
One important note; I don't know the proper license for the code, it was
provided without... will await feedback from Alfredo about it. For now
I've added the standard Blender GPL header.
source/creator/creator.c
changed ifdef's around fpe_handler to match when its actually used.
intern/SoundSystem/intern/SND_AudioDevice.cpp
Changed: SND_SoundObject* oldobject = oldobject = pIdObject->GetSoundObject();
to: SND_SoundObject* oldobject = pIdObject->GetSoundObject();
intern/SoundSystem/openal/SND_OpenALDevice.cpp
removed unused var.
source/blender/blenkernel/intern/mball.c
initalized a couple of vars that might have been used uninitalized.
The rest were changing types to match, most of them were something like
was short * should have been unsigned short *.
Kent
removed leftovers from Freeimage/Imagemagick experiments
and removed stuff from a Quicktime for linux implementation.
Also removed the (win32) Fullscreen button from the UI and
disabled the corresponding commandline option. The code is
still present to reenable the option whenever the ATI issues
get solved.
To enable it you will need to download OpenEXR and install it.
For the Makefiles you will need to set WITH_OPENEXR=true
and set NAN_OPENEXR to point to where OpenEXR is installed.
For scons you'll need to remove config.opts to get the new options
so you can enable OpenEXR, I was not able to get blender to link
with scons so the scons stuff may need to be tweaked a little but
I think it should work.
For other platform managers The OpenEXR stuff is similar to QUICKTIME
you need to define WITH_OPENEXR and setup the library stuff and
as you'll notice in this commit there are two extra files.
Kent
Summary: standardized imageformat functions(make function names similar, and
parameters in same order where relavant), small code cleanups, and
added a description of how to add an image format to blender.
Kent
Specifics:
merged png_decode.c and png_encode.c to png.c and cleaned function calls.
fixed some spacing in IMB_imbuf_types.h
casting cleanups:
intern/amiga.c
intern/ham.c
intern/iris.c
Modified switch statements to have a default type to insure values are set:
intern/antialias.c
Initalization of some vars and make types similar.
intern/bitplanes.c
cleaned function calls, and changed if else to if's with return:
intern/jpeg.c
added {}'s in multidemensional arrays.
intern/matrix.h
Made a little cleaner to read, and matched above changes.
intern/readimage.c
intern/writeimage.c
This code allows you to load Quicktime images and movies as textures
and render animations to Quicktime movies.
Note that the selected output codec is *not* saved in the blendfile.
To enable Quicktime functionality you need the SDK from Apple:
OSX: ftp://ftp.apple.com/developer/Development_Kits/QT6SDK_Mac.hqx
Win: ftp://ftp.apple.com/developer/Development_Kits/QT6SDK_Win.hqx
Add the \QTDevWin\CIncludes and \QTDevWin\Libraries directories
from this SDK to your build environment.
Enable the WITH_QUICKTIME compile flag in the following directories:
bf\blender\source\blender\imbuf
bf\blender\source\blender\src
bf\blender\source\blender\render
bf\blender\source\creator
