It was a bit odd that the scene was stored per window but not the view
layer. The reasoning was that you would use different view layers for
different tasks. This is still possible, but it's more predictable to
switch them both explicitly, and with child window support manually
syncing the view layers between multiple windows is no longer needed
as often.
* Main windows show a topbar and statusbar, and select a workspace and
scene. They are created with Window > New Main Window.
* Child windows do not show a topbar or statusbar. These follow the
workspace and scene of their parent main window. Created with Window >
New Window or View > Duplicate Area into New Window.
* The purpose of this change is to support multi monitor setups where you
just want to put more editors on the other monitors. Without multiple
topbars and statusbars, working within a single workspace and scene.
Creating multiple main windows is intended to be a concious choice to
do different tasks in different workspaces and scenes.
* Note these changes do not currently affect how the operating system
treats the windows.
* When changing the workspace, the layout in all child windows changes.
This makes sense if we consider child windows to be just a way to
extend the main window across more monitors. In some case it may be
useful to keep the same layout though, we can add an option for this
depending on user feedback.
* Add horizontal bar at bottom of all non-temp windows, similar to the Top-bar.
* Status-bar is hidden in UI-less fullscreen mode
* Current contents are preliminary and based on T54861:
** Left: Current file-path if needed. "(Modified)" note if file was changed.
** Center: Scene statistics (like in 2.7 Info Editor).
** Right: Progress-bars and reports
* Internally managed as own "STATUSBAR" editor-type (hidden in UI).
* Like with the Top-bar, Status-bar data and SDNA writing is disabled.
* Most changes in low-level screen/area code are to support layout bounds that differ from window bounds.
Design task: T54861
Main changes approved by @brecht.
This commit adds an operator, "Show Drivers Editor", to the RMB menu when
clicking on properties.
As per T54653, this will open a new Graph Editor instance in a new/separate
window (much like how the User Preferences show up in a popup window now),
and will configure all the relevant panels so that you can see and edit the
driver settings immediately without doing a lot of the view configuration steps
that were previously needed.
When doing so on a property that is driven, the driver/fcurve for that property
will be made active in the editor, ready for you to start editing its settings
without having to hunt it down again first.
Without this we need to have the context to get the
(space_type, mode) args for an active tool lookup.
For event handling & poll its more convenient to have direct access.
This patch adds support for:
- Per space-type tools (3D view and edit).
- Per mode tools (object, edit, weight-paint .. etc).
The top-bar shows the last activated tools options, this is a design
issue with using a global topbar to show per-space settings.
See D3395
For Blender 2.8 we had to be compatible with very old OpenGL versions, and
triple buffer was designed to work without offscreen rendering, by copying
the the backbuffer to a texture right before swapping. This way we could
avoid redrawing unchanged regions by copying them from this texture on the
next redraws. Triple buffer used to suffer from poor performance and driver
bugs on specific cards, so alternative draw methods remained available.
Now that we require newer OpenGL, we can have just a single draw method
that draw each region into an offscreen buffer, and then draws those to
the screen. This has some advantages:
* Poor 3D view performance when using Region Overlap should be solved now,
since we can also cache overlapping regions in offscreen buffers.
* Page flip, anaglyph and interlace stereo drawing can be a little faster
by avoiding a copy to an intermediate texture.
* The new 3D view drawing already writes to an offscreen buffer, which we
can draw from directly instead of duplicating it to another buffer.
* Eventually we will be able to remove depth and stencil buffers from the
window and save memory, though at the moment there are still some tools
using it so it's not possible yet.
* This also fixes a bug with Eevee sampling not progressing with stereo
drawing in the 3D viewport.
Differential Revision: https://developer.blender.org/D3061
This allows for background rendering with EEVEE and other opengl render
engine.
I've only tested it on Linux for the moment so I can't say about other
platforms.
We do lazy init because we cannot assume we will need Ghost for rendering
before having parsed all arguments and we cannot know if a script will
trigger rendering. This is also because it currently does not work without
any display server (blender will crash).
== Main Features/Changes for Users
* Add horizontal bar at top of all non-temp windows, consisting out of two horizontal sub-bars.
* Upper sub-bar contains global menus (File, Render, etc.), tabs for workspaces and scene selector.
* Lower sub-bar contains object mode selector, screen-layout and render-layer selector. Later operator and/or tool settings will be placed here.
* Individual sections of the topbar are individually scrollable.
* Workspace tabs can be double- or ctrl-clicked for renaming and contain 'x' icon for deleting.
* Top-bar should scale nicely with DPI.
* The lower half of the top-bar can be hided by dragging the lower top-bar edge up. Better hiding options are planned (e.g. hide in fullscreen modes).
* Info editors at the top of the window and using the full window width with be replaced by the top-bar.
* In fullscreen modes, no more info editor is added on top, the top-bar replaces it.
== Technical Features/Changes
* Adds initial support for global areas
A global area is part of the window, not part of the regular screen-layout.
I've added a macro iterator to iterate over both, global and screen-layout level areas. When iterating over areas, from now on developers should always consider if they have to include global areas.
* Adds a TOPBAR editor type
The editor type is hidden in the UI editor type menu.
* Adds a variation of the ID template to display IDs as tab buttons (template_ID_tabs in BPY)
* Does various changes to RNA button creation code to improve their appearance in the horizontal top-bar.
* Adds support for dynamically sized regions. That is, regions that scale automatically to the layout bounds.
The code for this is currently a big hack (it's based on drawing the UI multiple times). This should definitely be improved.
* Adds a template for displaying operator properties optimized for the top-bar. This will probably change a lot still and is in fact disabled in code.
Since the final top-bar design depends a lot on other 2.8 designs (mainly tool-system and workspaces), we decided to not show the operator or tool settings in the top-bar for now. That means most of the lower sub-bar is empty for the time being.
NOTE: Top-bar or global area data is not written to files or SDNA. They are simply added to the window when opening Blender or reading a file. This allows us doing changes to the top-bar without having to care for compatibility.
== ToDo's
It's a bit hard to predict all the ToDo's here are the known main ones:
* Add options for the new active-tool system and for operator redo to the topbar.
* Automatically hide the top-bar in fullscreen modes.
* General visual polish.
* Top-bar drag & drop support (WIP in temp-tab_drag_drop).
* Improve dynamic regions (should also fix some layout glitches).
* Make internal terminology consistent.
* Enable topbar file writing once design is more advanced.
* Address TODO's and XXX's in code :)
Thanks @brecht for the review! And @sergey for the complaining ;)
Differential Revision: D2758
Folders removed entirely:
* //extern/recastnavigation
* //intern/decklink
* //intern/moto
* //source/blender/editors/space_logic
* //source/blenderplayer
* //source/gameengine
This includes DNA data and any reference to the BGE code in Blender itself.
We are bumping the subversion.
Pending tasks:
* Tile/clamp code in image editor draw code.
* Viewport drawing code (so much of this will go away because of BI removal
that we can wait until then to remove this.
Also get rid of the static var and initialization.
This enables the user to see the progress on the info header.
Closing blender or reading a file also kill the job which is good.
Unfortunatly, this job cannot be interrupt by users directly. We could make it interruptible but we need a way to resume the compilation.
This separate context allows two things:
- It allows viewports in multi-windows configuration.
- F12 render can use this context in a separate thread and do a non-blocking render.
The downside is that the context cannot be used while rendering so a request to refresh a viewport will lock the UI. This is something that will be adressed in the future.
Under the hood what does that mean:
- Not adding more mess with VAOs management in gawain.
- Doing depth only draw for operators / selection needs to be done in an offscreen buffer.
- The 3D cursor "autodis" operator is still reading the backbuffer so we need to copy the result to it.
- All FBOs needed by the drawmanager must to be created/destroyed with its context active.
- We cannot use batches created for UI in the DRW context and vice-versa. There is a clear separation of resources that enables the use of safe multi-threading.
- Read-only access can often use EvaluationContext.object_mode
- Write access to go to WorkSpace.object_mode.
- Some TODO's remain (marked as "TODO/OBMODE")
- Add-ons will need updating
(context.active_object.mode -> context.workspace.object_mode)
- There will be small/medium issues that still need resolving
this does work on a basic level though.
See D3037
Move timer and tip out of button code,
now the only requests a tooltip,
passing a creation callback to run.
Needed for manipulators in 2.8,
also helps de-duplicate logic - since we never want
multiple tool-tips showing at once.
