Note that issue has several levels here actually, first one was metaball's materials
not being properly copied into new mesh (code was commented out because of some crash it
seems, made it a bit closer to mesh one and got no crash at all...).
Then, we were calling test_object_materials when ob->data is actually *not* new tmpmesh!
Will remove this call completely in next commit (to make it easier to bisect), I cannot see
any case where object would be assigned with newly generated tmpmesh in this func.
This function was only a wrapper around id_clear_lib_data(), and shapekeys
are not linkable nor shareable anyway, no point keeping this currently,
was only adding confusion about shapekey 'status' as a datatblock.
Idea looked good, but we have too much custom situations here (some half-fake-sub-ID
being copied with their 'owner', animdata, etc.), let's let datablock copy functions
handle that themselves.
Also allows to safely call BKE_id_expand_local from all copy functions now (only when
copying linked data).
Mostly pass bmain and do not check for NULL key, keys' make_local is
suspiciously simple in fact, but think until those behave like real
full-featured IDs, it's doing enough!
At first thought it was own recent work, but think issue is there since ages actually...
Basically, id_make_local() would always localize mesh/curve/lattice shapekeys, even in case
obdata localization actually made a local copy instead of localizing original datablock.
This was causing shapekeys being localized twice, and other odd nasty effects.
Now using modern features from libquery/libremap areas.
Provides same kind of fixes/improvements as for BKE_object_make_local() (see rBd1a4ae3f395a6).
Note: this enlightened broken case of proxy objects regarding make_local
(and also whole remapping, in fact). Will be fixed in near future.
Now test_object_materials only handles one object. New test_all_objects_materials
checks the whole bmain->object list for cases where it is actually needed.
Should avoid some useless looping over all objects!
Idea is to replace hard-to-track (id->lib != NULL) 'is linked datablock' check everywhere in Blender
by a macro doing the same thing. This will allow to easily spot those checks in future, and more importantly,
to easily change it (see work done in asset-engine branch).
Note: did not touch to readfile.c, since there most of the time 'id->lib' check actually concerns the pointer,
and not a check whether ID is linked or not. Will have a closer look at it later.
Reviewers: campbellbarton, brecht, sergey
Differential Revision: https://developer.blender.org/D2082
This commit changes a lot of how IDs are handled internally, especially the unlinking/freeing
processes. So far, this was very fuzy, to summarize cleanly deleting or replacing a datablock
was pretty much impossible, except for a few special cases.
Also, unlinking was handled by each datatype, in a rather messy and prone-to-errors way (quite
a few ID usages were missed or wrongly handled that way).
One of the main goal of id-remap branch was to cleanup this, and fatorize ID links handling
by using library_query utils to allow generic handling of those, which is now the case
(now, generic ID links handling is only "knwon" from readfile.c and library_query.c).
This commit also adds backends to allow live replacement and deletion of datablocks in Blender
(so-called 'remapping' process, where we replace all usages of a given ID pointer by a new one,
or NULL one in case of unlinking).
This will allow nice new features, like ability to easily reload or relocate libraries, real immediate
deletion of datablocks in blender, replacement of one datablock by another, etc.
Some of those are for next commits.
A word of warning: this commit is highly risky, because it affects potentially a lot in Blender core.
Though it was tested rather deeply, being totally impossible to check all possible ID usage cases,
it's likely there are some remaining issues and bugs in new code... Please report them! ;)
Review task: D2027 (https://developer.blender.org/D2027).
Reviewed by campbellbarton, thanks a bunch.
Now CD_SHAPEKEY_INDEX customdata is stored in edit-mode when hooks and vertex parents are used.
This also fixes a bug where undo would loose key-index data.
Move to structs for BM_mesh_bm_to/from_me to avoid passing many argument, which mostly aren't used.
Code was using degrees as radians.
Still unclear why default cube will have 180 degrees angle, but new meshes 30,
but that's kinda separate topic which is to be addressed separately.
This is a subject for final 2.77 release.
We have callbacks for that, they also do some checks and help ensure things are done
correctly. Only place where this is assumed not true is blenloader (since here we
may affect refcount of library IDs as well...).
Idea is, instead of ignoring completely missing linked datablocks, to
create void placeholders for them.
That way, you can work on your file, save it, and find again your missing data once
lib becomes available again. Or you can edit missing lib's path (in Outliner),
save and reload the file, and you are done.
Also, Outliner now shows broken libraries (and placeholders) with a 'broken lib' icon.
Future plans are also to be able to relocate missing libs and reload them at runtime.
Code notes:
- Placeholder ID is just a regular datablock of same type as expected linked one,
with 'default' data, and a LIB_MISSING bitflag set.
- To allow creation of such datablocks, creation of datablocks in BKE was split in two step:
+ Allocation of memory itself.
+ Setting of all internal data to default values.
See also the design task (T43351).
Reviewed by @campbellbarton, thanks a bunch!
Differential Revision: https://developer.blender.org/D1394
Title says pretty much everything, we now have BKE and RNA funcs to get vertex, poly and
loop normals of a given shapekey.
This will be used e.g. in FBX exporter (shapekeys need normal data too).
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D1510
Issue was caused by deform vert layer existing in the mesh.
Solved in quite simple way, but it still might be missing
some other layers.
Any custom data experts around to check if it's correct?
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
This commit only adds callbacks which then later be used with major dependency
graph commit, keeping the upcoming commit more clean to follow.
Should be no functional changes so far still.
Added an utility function which performs vertex split based on the loop
normal so now backing API matches to what's happening in Cycles and BI
in terms of autosplit.
Reviewers: dfelinto, campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D1174
The idea is pretty simple: instead of making temporary copy of all the
related custom data layers just pass the ownership from the DM to the
mesh.
This is really handy in cases when you've got DM which you need to
convert to Mesh datablock and wouldn't need that DM after conversion
anyway.
Foe example, render database conversion, exporters and even Modifier
Apply will benefit from this option.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D1127
This is the core code for it, tools (datatransfer and modifier) will come in next commits).
RNA api is already there, though.
See the code for details, but basically, we define, for each 'smooth fan'
(which is a set of adjacent loops around a same vertex that are smooth, i.e. have a single same normal),
a 'loop normal space' (or lnor space), using auto-computed normal and relevant edges, and store
custom normal as two angular factors inside that space. This allows to have custom normals
'following' deformations of the geometry, and to only save two shorts per loop in new clnor CDLayer.
Normal manipulation (editing, mixing, interpolating, etc.) shall always happen with plain 3D vectors normals,
and be converted back into storage format at the end.
Clnor computation has also been threaded (at least for Mesh case, not for BMesh), since the process can
be rather heavy with high poly meshes.
Also, bumping subversion, and fix mess in 2.70 versioning code.
Propper fix reverting most of rB60e70c0c6014e5, which was only partial specific fix.
This code uses generic `BKE_id_lib_local_paths()` func to handle all possible paths.
Reviewers: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D977
Fix T39286: Display percentage ignored in Cycles viewport.
The threaded depsgraph update changes included a cleanup of the global
is_rendering flag, which was replaced by a general EvalContext being
passed to dupli functions.
Problem is that the global flag was true for viewport duplis before
(ugly hack), which was used as a check for generating dupli orco/UV from
mesh data layers. The new flag is stricter and only true for actual
renders, which disables these attributes and breaks the Cycles
Texture Coordinates and UVMap nodes.
The solution is to extend the simple for_render boolean to an enum:
* VIEWPORT: OpenGL viewport drawing (dupli tex coords omitted)
* PREVIEW: Viewport preview render (simplified modifiers)
* RENDER: Full render with all details and attributes
There are still some areas that need to be examined, in particular
modifiers seem to totally ignore the EvaluationContext!
Instead they generally execute without render params from the depsgraph
(BKE_object_handle_update_ex) and are built with render settings
explicitly.
Differential Revision: https://developer.blender.org/D613
