Fix#22018: joining objects with different multires levels loses levesl from the higher multires object
- Synchronyze mulires subdivision level when joining objects
- Apply scale on MDISP layer when applying scale
- Re-calculate MDISP when joining scaled objects
- removed deprecated bitmap arg from IMB_allocImBuf (plugins will need updating).
- mostly tagged UNUSED() since some of these functions look like they may need to have the arguments used later.
Fixed bug #23657, "Modifiers dosen't work when you select diffrent mesh for object"
Multires modifier now adds empty mdisps if they're missing, rather than displaying a warning
Switching an object's mesh will now check for a multires modifier; if found the modifier's total number of levels are reset to match the mesh's mdisps
Switching the mesh also forces a multires update so that sculpted changes aren't lost
* UV data on multires meshes wasn't getting imported properly. Fixed by separately loading in all "first-level" data from the old multires data type into mesh. Note that an "incorrect" data layers might still be loaded and be active on the mesh, but the correct layers should now also show up in the UV layer selector.
Fixes various crashes and redraw problems, most noticeable new feature
is that you can now sculpt on a multires mesh with deforming modifiers
preceding it.
I've left out support for sculpting on multires with enabled modifiers
following it, in this case only the base mesh can be sculpted now. The
code changes needed to do this are just too ugly in my opinion, would
need a more torough redesign which I don't think we should try now. In
my opinion this is also not really an important case, since it's going
to be incredibly slow anyway to run a modifier on a high res mesh while
sculpting.
So, to summarize current state:
* Fastest sculpting: base mesh with no modifiers or multires with only
modifiers preceding it.
* Slower sculpting: base mesh with modifiers, depends on the speed of
the modifiers.
* Not supported: multires mesh with modifiers following it.
for now, it's too fine grained and so becomes a performance bottleneck on some
platforms, while only providing a modest speedup on others. Couldn't find a
simple enough solution to solve this, so for now no multithreading here.
tile cache code in imbuf, but it is not hooked up to the render engine.
Imbuf module: some small refactoring and removing a lot of unused or old code
(about 6.5k lines).
* Added a ImFileType struct with callbacks to make adding an file format type,
or making changes to the API easier.
* Move imbuf init/exit code into IMB_init()/IMB_exit() functions.
* Increased mipmap levels from 10 to 20, you run into this limit already with
a 2k image.
* Removed hamx, amiga, anim5 format support.
* Removed colormap saving, only simple colormap code now for reading tga.
* Removed gen_dynlibtiff.py, editing this is almost as much work as just
editing the code directly.
* Functions removed that were only used for sequencer plugin API:
IMB_anim_nextpic, IMB_clever_double, IMB_antialias, IMB_gamwarp,
IMB_scalefieldImBuf, IMB_scalefastfieldImBuf, IMB_onethird, IMB_halflace,
IMB_dit0, IMB_dit2, IMB_cspace
* Write metadata info into OpenEXR images. Can be viewed with the command
line utility 'exrheader'
For the image tile cache code, see this page:
http://wiki.blender.org/index.php/Dev:2.5/Source/Imaging/ImageTileCache
multires modifier if both are in the stack (patch #21965)
This patch also removes limitation of multires reshaping when
destination object has got modifiers after multires modifier.
levels, child particles, and shadow/SSS/AO quality.. Now also works on what
is displayed in the 3d view instead of only rendering, see panel in the scene
properties.
Most file changes were to make scene available in the isDisabled modifier
callback function.
Most likely will not compile for others, I'd appreciate any build errors
and missing files reports (I can never seem to get everything committed
and all the build systems working without help).
Porting over the sculpt/multires tools was a breeze,
thanks goes to brecht for a design that didn't exclude
ngons and was easy to port.
Note that I've not tested externally-backed multires
file support yet. Also, I still need to write version
patch code for some cases.
Some notes:
* Like trunk, topological changes don't update multires right,
so e.g. subdivide will duplicate multires data on the new faces,
instead of subdividing it.
* If you set the debug value (ctrl-alt-d) to 1 it'll turn on
my experiments in speeding up sculpting on higher-res multires
meshes (but note it makes partial redraw not completely accurate).
* There's a bug where you have to go through editmode to get out
of sculpt mode, not sure if I inherited or created this myself.
Also fixes:
* Weight paint subsurf drawing.
* Missing pointer endian conversion in paint brushes.
* Use of unitialized variable in screen version patch.
* Multires modifier without mdisps layer crash.
Revised external multires file saving. Now it is more manual in that you
have to specify where to save it, like an image file, but still saved at
the same time as the .blend. It would ideally be automatic, but this is
difficult to implement, so for now this should at least be more reliable.
* Multithread parts of multires and subsurf. Only loops working on
face grid data and do no memory allocation have been multithreaded,
others would be more complicated.
* Force some CCGSubsurf functions to be inlined, gives a small overall
speedup in subsurf code.
* Fix sculpting not working correct with transformed objects.
* Fix a few cases of "spikes" on lower level multires levels. There's
still cases where it happens, usually on boundary cornders. The
problem is that in such cases the limit surfaces can be very different
from the low res surface, so the tangent space is very different too..
* Fix crash deleting multires higher levels with level set to 0.
* Fix crashes that happened sometimes when adding faces in editmode.
* This is experimental, the file format may change still!
* Helps reduce memory usage, keeps .blend files smaller, and makes
saving quicker when not editing multires.
* This is implemented at the customdata level, currently only the
multires displacements can be stored externally.
ToDo
* Better integration with object duplication/removal/..
* Memory is not yet freed when exiting sculpt mode.
* Loading only lower levels is not supported yet.
* Displacement coordinates are now stored differently, as a grid per
face corner. This means there is duplication of coordinates, especially
at low subdivision levels, but the simpler implementation justifies it
I think.
* ToDo: conversion of existing multires files (2.4x or 2.5x), loading them
may even crash now.
* Editmode preservation/interpolation code also has not been updated yet.
* Multires now works on the CCGDerivedMesh grids instead of CDDerivedMesh,
which should be more memory efficient.
* There are still bad memory peaks (if you're using 32bit) when subdividing
or propagating displacements. Though at least there should be no huge
memory blocks allocated, which windows is now to have trouble with.
* Still found some weird spike artifacts at lower multires levels, some also
happening before this commit. Perhaps computation of tangents needs to be
tweaked more.
* Multires modifier now has viewport, sculpt and render levels. Also the
levels have been made consistent with subsurf, previously the same level
of subdivision was one less for multires.
* Both multires and subsurf modifier now can have their subdivision level
set to 0 for no subdivision.
* Now uses the CCG DerivedMesh also in object mode, used to be edit mode only.
* Create CD_ORIGINDEX layer on demand, to save memory.
* Removed ss_to_cdderivedmesh function, and instead create ccgdm and then
convert that to cddm, to avoid code duplication.
* Added and implement DerivedMesh interface functions to obtain face grids.
* Store edge/face flags more memory efficient.
* Export CCGDerivedMesh struct in BKE_subsurf.h
* Convert all code to use new functions.
* Branch maintainers may want to skip this commit, and run this
conversion script instead, if they use a lot of math functions
in new code:
http://www.pasteall.org/9052/python
Limitations:
1) Parents and children of selected objects are excluded from the pool (siblings are ok) Making it work with that would required unparenting and reparenting after transform, that would turn nasty really quick.
2) Does not support Connected (this could be done through parent links, but see 3 first).
3) Parent relationships in affected objects aren't taken into account. When parent and children in the area of effect, remember that the children will also take the motion of the parents (with additive results). This could perhaps be fixed, but it could be nasty.
Other stuff:
New BASE_EDITABLE macro that checks if base is editable (like TESTBASELIB except it doesn't check for selection)
Add scene parameter to TESTBASELIB_BGMODE macro (using it from current scope is nasty)
* #19583: Keying Sets list issues
Deleting a Keying Set (or a Keying Set Path) set the active index to 0, but that would mean that the first item would be selected but not visible.
* #19590: Keyframing properties of a modifier with more than one of it's type the property will highlight in all
- Modifiers now always have a unique name, so renaming a modifier should check that the name is unique. Most of the files changed in this commit were just to make sure that modifiers got unique names when they were created
- Modifiers path getter was wrapped a bit wrong (missing the "s around the name)
* Constraints Bugs
- Constraints renaming now also makes sure the names stay unique
- Fixed (or attempted to fix) compiler warnings about some enum declaration for distance constraint
Notifiers
---------
Various fixes for wrong use of notifiers, and some new notifiers
to make things a bit more clear and consistent, with two notable
changes:
* Geometry changes are now done with NC_GEOM, rather than
NC_OBJECT|ND_GEOM_, so an object does need to be available.
* Space data now use NC_SPACE|ND_SPACE_*, instead of data
notifiers or even NC_WINDOW in some cases. Note that NC_SPACE
should only be used for notifying about changes in space data,
we don't want to go back to allqueue(REDRAW..).
Depsgraph
---------
The dependency graph now has a different flush call:
DAG_object_flush_update(scene, ob, flag)
is replaced by:
DAG_id_flush_update(id, flag)
It still works basically the same, one difference is that it now
also accepts object data (e.g. Mesh), again to avoid requiring an
Object to be available. Other ID types will simply do nothing at
the moment.
Docs
----
I made some guidelines for how/when to do which kinds of updates
and notifiers. I can't specify totally exact how to make these
decisions, but these are basically the guidelines I use. So, new
and updated docs are here:
http://wiki.blender.org/index.php/BlenderDev/Blender2.5/NotifiersUpdateshttp://wiki.blender.org/index.php/BlenderDev/Blender2.5/DataNotifiers
