Addendum to previous fix, which was for point selection, this fixes the
face selection mode. The issue is caused by wrong flags used for paint
mode (the edit mode flag was always used). Also add back flag which was
accidentally removed in 16f5d51109.
Instancing with geometry nodes uses just the evaluated Mesh, and ignores the
Object that it came from. That meant that it would try to look up the subsurf
modifier on the instancer object which does not have the subsurf modifier.
Instead of storing a session UUID and looking up the modifier data, store a
point to the subsurf modifier runtime data. Unlike the modifier data, this
runtime data is preserved across depsgraph CoW. It must be for the subdiv
descriptor contained in it to stay valid along with the draw cache.
As a bonus, this moves various Mesh_Runtime variables into the subsurf runtime
data, reducing memory usage for meshes not using subdivision surfaces.
Also fixes T98693, issues with subdivision level >= 8 due to integer overflow.
Differential Revision: https://developer.blender.org/D15184
Although reusing the same patch coordinate for all corner pointing the
same vertex works for interpolation vertices, it does work for
interpolation face varying attributes. So we need to keep the original
patch coordinates around for face varying interpolation. This was caused
by the previous fix (a5dcae0c64).
Faces, edges, and vertices are still shown when GPU subdivision is
actived. This is because the related edit mode flags were ignored by the
subdivision code.
The flags are now passed to the various compute shaders mostly as part of
the extra coarse data, also used for e.g. selection. For loose edges, a
temporary buffer is created when extracting them. Loose vertices are
already taken into account as it reuses the routines for coarse mesh
extraction, although `MeshRenderData.use_hide` was not initialized,
which is fixed now.
This uses the recently introduced evaluator's vertex
data to smoothly interpolate original coordinates instead
of using linear interpolation.
The orcos are interpolated at the same time as positions
and as such, the specific subdivision routine for the
orco extractor has been removed. The patch evaluation
shader uses a definition to enable code specific to
orco evaluation.
Since the orco layer may not have been requested on first
render, and since orco data is now stored in the OpenSubDiv
evaluator, the evaluator needs to be recreated if an
orco layer is suddenly available. For this, a callback
to check if the evaluator has the data was added. This is
added to the evaluator as the `Subdiv` cache stored in the
modifier is invalidated less often than the Mesh batch cache
and so leads to fewer evaluator recreations.
Differential Revision: https://developer.blender.org/D14999
The mesh drawing code used a different mesh to check whether or not to
draw face dots and to actually retrieve them. The fix is moving the
responsibility of determining whether to use subsurf face dots to the
creation of `MeshRenderData` where the mesh used for drawing is
known, rather than doing it at a higher level.
Differential Revision: https://developer.blender.org/D14855
The mesh drawing code used a different mesh to check whether or not to
draw face dots and to actually retrieve them. The fix is moving the
responsibility of determining whether to use subsurf face dots to the
creation of `MeshRenderData` where the mesh used for drawing is
known, rather than doing it at a higher level.
Differential Revision: https://developer.blender.org/D14855
The crash is caused as the data for the UV editor is requested before
the data for the mesh as a separate draw update. Since building the UV
stretch angle buffer requires the position buffer, the latter is not
created yet in this case.
To fix this, create a local position buffer from the subdivision data. An
alternate fix was considered to remove the dependency on the position
buffer by interpolating on the GPU the coarse stretch angle buffer but
this did work. Maybe this will be revisited.
Simple port with a few cosmetic changes:
- Attribute named "color" for indices VBO is now called "index"
- The indices VBO is now composed of `int`s instead of `uint`s (this simplifies the source)
Differential Revision: https://developer.blender.org/D14800
The lines paint mask IBO extraction was not implemented for GPU subdivision.
For it to work, we also now need to preserve the subdivision loop to
subdivision edge map, which until now was overwritten to store coarse edges
(the map to coarse edges is still preserved).
Also the paint flag stored in the 4th dimension of the loop normal buffer
was not properly set for flat shaded faces, leading to other kind of
artefacts and render issues.
There are two issues revealed in the bug report:
- the GPU subdivision does not support meshes with only loose geometry
- the loose geometry is not subdivided
For the first case, checks are added to ensure we still fill the
buffers with loose geometry even if no polygons are present.
For the second case, this adds
`BKE_subdiv_mesh_interpolate_position_on_edge` which encapsulates the
loose vertex interpolation mechanism previously found in
`subdiv_mesh_vertex_of_loose_edge`.
The subdivided loose geometry is stored in a new specific data structure
`DRWSubdivLooseGeom` so as to not pollute `MeshExtractLooseGeom`. These
structures store the corresponding coarse element data, which will be
used for filling GPU buffers appropriately.
Differential Revision: https://developer.blender.org/D14171
A simple case of missing the tangent VBO. The tangents are computed from
the coarse mesh, and interpolated on the GPU for the final mesh. Code for
initializing the tangents, and the vertex format for the VBO was
factored out of the coarse extraction routine, to be shared with the
subdivision routine.
Reuse the same vertex normals calculation as for the GPU code, by
weighing each vertex normals by the angle of the edges incident to the
vertex on the face.
Additionally, remove limit normals, as the CPU code does not use them
either, and would also cause different shading issues when limit surface
is used.
Fixes T95242: shade smooth artifacts with edge crease and limit surface
Fixes T94919: subdivision, different shading between CPU and GPU
The issue has two causes: on one hand origin indices were not handled
properly, on the other hand the extraction type (Mesh, BMesh, or mapped)
was not detected correctly.
For the second case reuse the MeshRenderData creation from the coarse
code path so that we make the same decisions. Loose geometry extraction
had to be updated to properly handle the BMesh cases.
For the origin indices, in some cases (for edges and faces), the arrays
used by the subdivision code already have the origin indices baked into
them, so mapping them a second time through the origin index layer is
wrong, and could cause out of bounds accesses.
For vertices especially, we would use two arrays: one for mapping
subdivision vertices to coarse vertices, and another one to map coarse
vertices to subdivision loops used for the selection index buffer. The
second one is now removed (which saves a bit of memory) as it is did not
have the proper data setup for use with the origin indices and we can
easily compute it using the first array anyway.
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
This evaluator is used in order to evaluate subdivision at render time, allowing for
faster renders of meshes with a subdivision surface modifier placed at the last
position in the modifier list.
When evaluating the subsurf modifier, we detect whether we can delegate evaluation
to the draw code. If so, the subdivision is first evaluated on the GPU using our own
custom evaluator (only the coarse data needs to be initially sent to the GPU), then,
buffers for the final `MeshBufferCache` are filled on the GPU using a set of
compute shaders. However, some buffers are still filled on the CPU side, if doing so
on the GPU is impractical (e.g. the line adjacency buffer used for x-ray, whose
logic is hardly GPU compatible).
This is done at the mesh buffer extraction level so that the result can be readily used
in the various OpenGL engines, without having to write custom geometry or tesselation
shaders.
We use our own subdivision evaluation shaders, instead of OpenSubDiv's vanilla one, in
order to control the data layout, and interpolation. For example, we store vertex colors
as compressed 16-bit integers, while OpenSubDiv's default evaluator only work for float
types.
In order to still access the modified geometry on the CPU side, for use in modifiers
or transform operators, a dedicated wrapper type is added `MESH_WRAPPER_TYPE_SUBD`.
Subdivision will be lazily evaluated via `BKE_object_get_evaluated_mesh` which will
create such a wrapper if possible. If the final subdivision surface is not needed on
the CPU side, `BKE_object_get_evaluated_mesh_no_subsurf` should be used.
Enabling or disabling GPU subdivision can be done through the user preferences (under
Viewport -> Subdivision).
See patch description for benchmarks.
Reviewed By: campbellbarton, jbakker, fclem, brecht, #eevee_viewport
Differential Revision: https://developer.blender.org/D12406
