There were at least three copies of those:
- OB_RECALC* family of flags, which are rudiment of an old
dependency graph system.
- PSYS_RECALC* which were used by old dependency graph system
as a separate set since the graph itself did not handle
particle systems.
- DEG_TAG_* which was used to tag IDs.
Now there is a single set, which defines what can be tagged
and queried for an update. It also has some aggregate flags
to make queries simpler.
Lets once and for all solve the madness of those flags, stick
to a single set, which will not overlap with anything or require
any extra conversion.
Technically, shouldn't be measurable user difference, but some
of the agregate flags for few dependency graph components did
change.
Fixes T58632: Particle don't update rotation settings
The main use one can imagine for this is adding tweak controls to
parts of a model that are already deformed by multiple other major
bones. It is natural to expect such locations to deform as if the
tweaks aren't there by default; however currently there is no easy
way to make a bone follow multiple other bones.
This adds a new constraint that implements the math behind the Armature
modifier, with support for explicit weights, bone envelopes, and dual
quaternion blending. It can also access bones from multiple armatures
at the same time (mainly because it's easier to code it that way.)
This also fixes dquat_to_mat4, which wasn't used anywhere before.
Differential Revision: https://developer.blender.org/D3664
Only tag relations update when new f-curve was allocated. This solves
possible too slow keyframe insertion when doing character animation,
but still does proper relation update when new ID component became
animated.
For now only `selected_pose_bones_from_active_object`, more options can
be added on demand.
Discussed this with Campbell Barton. We may need this only for selected
pose bones, time will tell.
You can now add the target from the non-active armature when they are
both in pose mode.
There were different ways of going about those operators:
* We could create one constraint on each active bone of each object.
That wouldn't follow what creating constraints from the UI does
though.
* We could change the selection/active order and create a constraint for
all the selected bones, to the active bone. However this would change
the design of changing only the active bone (which also is the one we
see in the buttons editor).
But in the end I think it makes more sense to let users set a constraint
from a charactor to a prop in a handy way.
This is pretty much what we had in 2.7x. There we would go for the
selected objects, if no selected bone was found in the active object.
In 2.8, however, we need this change to make things working as
before/intended.
Notes:
* Really need to address RNA setters case, end up adding way too much
G.main here these days... :/
* Added Main pointer into bAnimContext, helps a lot in anim code ;)
Folders removed entirely:
* //extern/recastnavigation
* //intern/decklink
* //intern/moto
* //source/blender/editors/space_logic
* //source/blenderplayer
* //source/gameengine
This includes DNA data and any reference to the BGE code in Blender itself.
We are bumping the subversion.
Pending tasks:
* Tile/clamp code in image editor draw code.
* Viewport drawing code (so much of this will go away because of BI removal
that we can wait until then to remove this.
The depsgraph was always created within a fixed evaluation context. Passing
both risks the depsgraph and evaluation context not matching, and it
complicates the Python API where we'd have to expose both which is not so
easy to understand.
This also removes the global evaluation context in main, which assumed there
to be a single active scene and view layer.
Differential Revision: https://developer.blender.org/D3152
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
This makes code closer to id_override/assent-engine ones, which
introduce a new type of linked data, and hence reserve
ID_IS_LINKED_DATABLOCK to real linked datablocks.
Cyclic extrapolation is implemented as an f-curve modifier, so this
technically violates abstraction separation and is something of a hack.
However without such behavior achieving smooth looping with cyclic
extrapolation is extremely cumbersome.
The new behavior is applied when the first modifier is Cyclic
extrapolation in Repeat or Repeat with Offset mode without
using influence, repeat count or range restrictions.
This change in behavior means that curve handles have to be updated
when the modifier is added, removed or its options change. Due to the
way code is structured, it seems it requires a helper link to the
containing curve from the modifier object.
Reviewers: aligorith
Differential Revision: https://developer.blender.org/D2783
We do have an history of those pieces of evil in our code, would be nice
to get fully rid of it, but at the very least let's not add more of them
in new code. :)
Note that some little parts of code have been dissabled because eval_ctx
was not available there. This should be resolved once DerivedMesh is
replaced.
Design Documents
----------------
* https://wiki.blender.org/index.php/Dev:2.8/Source/Layers
* https://wiki.blender.org/index.php/Dev:2.8/Source/DataDesignRevised
User Commit Log
---------------
* New Layer and Collection system to replace render layers and viewport layers.
* A layer is a set of collections of objects (and their drawing options) required for specific tasks.
* A collection is a set of objects, equivalent of the old layers in Blender. A collection can be shared across multiple layers.
* All Scenes have a master collection that all other collections are children of.
* New collection "context" tab (in Properties Editor)
* New temporary viewport "collections" panel to control per-collection
visibility
Missing User Features
---------------------
* Collection "Filter"
Option to add objects based on their names
* Collection Manager operators
The existing buttons are placeholders
* Collection Manager drawing
The editor main region is empty
* Collection Override
* Per-Collection engine settings
This will come as a separate commit, as part of the clay-engine branch
Dev Commit Log
--------------
* New DNA file (DNA_layer_types.h) with the new structs
We are replacing Base by a new extended Base while keeping it backward
compatible with some legacy settings (i.e., lay, flag_legacy).
Renamed all Base to BaseLegacy to make it clear the areas of code that
still need to be converted
Note: manual changes were required on - deg_builder_nodes.h, rna_object.c, KX_Light.cpp
* Unittesting for main syncronization requirements
- read, write, add/copy/remove objects, copy scene, collection
link/unlinking, context)
* New Editor: Collection Manager
Based on patch by Julian Eisel
This is extracted from the layer-manager branch. With the following changes:
- Renamed references of layer manager to collections manager
- I doesn't include the editors/space_collections/ draw and util files
- The drawing code itself will be implemented separately by Julian
* Base / Object:
A little note about them. Original Blender code would try to keep them
in sync through the code, juggling flags back and forth. This will now
be handled by Depsgraph, keeping Object and Bases more separated
throughout the non-rendering code.
Scene.base is being cleared in doversion, and the old viewport drawing
code was poorly converted to use the new bases while the new viewport
code doesn't get merged and replace the old one.
Python API Changes
------------------
```
- scene.layers
+ # no longer exists
- scene.objects
+ scene.scene_layers.active.objects
- scene.objects.active
+ scene.render_layers.active.objects.active
- bpy.context.scene.objects.link()
+ bpy.context.scene_collection.objects.link()
- bpy_extras.object_utils.object_data_add(context, obdata, operator=None, use_active_layer=True, name=None)
+ bpy_extras.object_utils.object_data_add(context, obdata, operator=None, name=None)
- bpy.context.object.select
+ bpy.context.object.select = True
+ bpy.context.object.select = False
+ bpy.context.object.select_get()
+ bpy.context.object.select_set(action='SELECT')
+ bpy.context.object.select_set(action='DESELECT')
-AddObjectHelper.layers
+ # no longer exists
```
