With this commit, curve objects support the geometry nodes modifier.
Curves objects now evaluate to `CurveEval` unless there was a previous
implicit conversion (tessellating modifiers, mesh modifiers, or the
settings in the curve "Geometry" panel). In the new code, curves are
only considered to be the wire edges-- any generated surface is a mesh
instead, stored in the evaluated geometry set.
The consolidation of concepts mentioned above allows remove a lot of
code that had to do with maintaining the `DispList` type temporarily
for modifiers and rendering. Instead, render engines see a separate
object for the mesh from the mesh geometry component, and when the
curve object evaluates to a curve, the `CurveEval` is always used for
drawing wire edges.
However, currently the `DispList` type is still maintained and used as
an intermediate step in implicit mesh conversion. In the future, more
uses of it could be changed to use `CurveEval` and `Mesh` instead.
This is mostly not changed behavior, it is just a formalization of
existing logic after recent fixes for 2.8 versions last year and two
years ago. Also, in the future more functionality can be converted
to nodes, removing cases of implicit conversions. For more discussion
on that topic, see T89676.
The `use_fill_deform` option is removed. It has not worked properly
since 2.62, and the choice for filling a curve before or after
deformation will work much better and be clearer with a node system.
Applying the geometry nodes modifier to generate a curve is not
implemented with this commit, so applying the modifier won't work
at all. This is a separate technical challenge, and should be solved
in a separate step.
Differential Revision: https://developer.blender.org/D11597
Recently we have decided to avoid fancier versioning for nodes with
string inputs for attribute names when updating the attribute workflow
for 3.0. In that case we would just duplicate any node that will
have an updated version to work with fields.
We want to be able to use the "proper" ID names for the new versions
of the nodes though, so this patch adds "Legacy" to the IDs of all
nodes that will be replaced in 3.0. This commit also removes the nodes
from the add menu when the fields experimental preference is enabled,
in order to make it clear what has been updated and what hasn't.
Nodes in the "Maybe" categories in versioning_300.c can be renamed
later if necessary. For now it's probably better to be conservative,
and to keep the list complete.
Differential Revision: https://developer.blender.org/D12420
With D12436 two File Browser properties were renamed but two references
not changed in space_filebrowser.py
See D12449 for details.
Differential Revision: https://developer.blender.org/D12449
Reviewed by Hans Goudey
Preferences / File Browser section made less confusing.
See D12436 for details and comparisons.
Differential Revision: https://developer.blender.org/D12436
Reviewed by Campbell Barton and Julian Eisel
This implements the initial core framework for fields and anonymous
attributes (also see T91274).
The new functionality is hidden behind the "Geometry Nodes Fields"
feature flag. When enabled in the user preferences, the following
new nodes become available: `Position`, `Index`, `Normal`,
`Set Position` and `Attribute Capture`.
Socket inspection has not been updated to work with fields yet.
Besides these changes at the user level, this patch contains the
ground work for:
* building and evaluating fields at run-time (`FN_fields.hh`) and
* creating and accessing anonymous attributes on geometry
(`BKE_anonymous_attribute.h`).
For evaluating fields we use a new so called multi-function procedure
(`FN_multi_function_procedure.hh`). It allows composing multi-functions
in arbitrary ways and supports efficient evaluation as is required by
fields. See `FN_multi_function_procedure.hh` for more details on how
this evaluation mechanism can be used.
A new `AttributeIDRef` has been added which allows handling named
and anonymous attributes in the same way in many places.
Hans and I worked on this patch together.
Differential Revision: https://developer.blender.org/D12414
Mistake in {rB459974896228}.
To use Object Fonts, (vertex) instancing needs to be enabled.
So bring back the instancing panel and improve the instancing choice
(similar to rB6c0c766bcaa0) by just giving the 'Vertex' choice (or
'None') and explain this is only used for Object Fonts on characters.
Was reported in D11348 itself.
Differential Revision: https://developer.blender.org/D12438
The panning angle allows a more intuitive panning when the output is
surround sound. It sets the angle on the horizontal plane around the
listener. 0 degrees is to the front, negative values go to the left and
positive ones to the right. +/-180 degrees is directly from the back.
Technical detail: the panning value is linear with the panning angle
with a factor of 90 degrees. For stereo this means that -1 is left and
+1 right, since the speakers are exactly 90 degrees to either side.
Differential Revision: https://developer.blender.org/D12275
This adds an option to use a capture of the entire main window as the
blend file preview thumbnail.
See D10492 for details and examples.
Differential Revision: https://developer.blender.org/D10492
Reviewed by Campbell Barton
I remember when we originally decided on the Dimensions panel,
one of the reasons we combined time and image size properties in the same panel,
was simply because the 2.49 and previous UIs used fixed-size panels,
so we often put two categories of properties inside a panel, using two columns.
Now that we no longer do this, we could clarify and simplify some panels
by splitting them, such as the Output > Dimensions panel
{F6753690}
Reviewed By: brecht, pablovazquez
Differential Revision: https://developer.blender.org/D4440
The posterize node limits the number of colors per channel.
This is useful to generate masks or to generate stylized images
Both the tiled and full-frame implementation are included in this patch
{F10314012}
Reviewed By: manzanilla, jbakker
Differential Revision: https://developer.blender.org/D12304
Allow the UDIM grid to be shown and adjusted when there are images
loaded in UV edit mode. Right now the grid feature disappears once an
image is loaded and many have found this to be confusing.
Based on community and artist feedback, there was support to change this
behavior[1]
This patch does the following:
- Allows the grid to be shown even when images are present
- The max allowable dimensions for the grid has been increased from
10x10 to 10x100 to match the underlying maximum UDIM range that blender
supports
Note: This should not affect other Image editor modes like Paint/Mask or
the Render Result viewer etc. Future work in this area is currently
documented in a dedicated design task[2]
[1] https://devtalk.blender.org/t/the-udim-tile-grid-design-and-feedback-thread/20136
[2] https://developer.blender.org/T90913
Differential Revision: https://developer.blender.org/D11860
This commit fixes the custom property edit operator for the the case of
editing group properties. Currently this isn't supported very well, the
data is converted to a string, but the operator shouldn't fail anyway.
This allows editing properties created like this:
C.object['abuse'] = {'parent' : ['child1', 'child2']}
These changes reflect some issues with the design of the operator.
Requiring guessing the type of the data does not work well at all, and
makes code more complicated. In the future this operator can be updated
to use a type drop-down.
Differential Revision: https://developer.blender.org/D12364
All props of annotations are not animatable by design and opacity must be equal.
As the opacity is reused by gpencil objects, a new prop has been created in order to use different props for annotations and GP objects.
Steps to reproduce:
- enable Extended Asset Browser
- open a regular File Browser
gives:
"rna_uiItemR: property not found: FileSelectParams.asset_category"
Now do proper poll.
Differential Revision: https://developer.blender.org/D12350
This commit fixes editing the value of a list of strings custom property
with the "Custom Property Edit" operator. This sort of custom property
isn't very well supported in general, but editing the values should
work properly anyway.
Differential Revision: https://developer.blender.org/D12348
This node takes a curve geometry input and creates a filled mesh at Z=0
using a constrained Delaunay triangulation algorithm. Because of the
choice of algorithm, the results should be higher quality than the
filling for 2D curve objects.
This commit adds an initial fairly simple version of the node, but more
features may be added in the future, like transferring attributes when
necessary, or an index attribute input to break up the calculations
into smaller chunks to improve performance.
Differential Revision: https://developer.blender.org/D11846
The storage of IDProperty UI data (min, max, default value, etc) is
quite complicated. For every property, retrieving a single one of these
values involves three string lookups. First for the "_RNA_UI" group
property, then another for a group with the property's name, then for
the data value name. Not only is this inefficient, it's hard to reason
about, unintuitive, and not at all self-explanatory.
This commit replaces that system with a UI data struct directly in the
IDProperty. If it's not used, the only cost is of a NULL pointer. Beyond
storing the description, name, and RNA subtype, derived structs are used
to store type specific UI data like min and max.
Note that this means that addons using (abusing) the `_RNA_UI` custom
property will have to be changed. A few places in the addons repository
will be changed after this commit with D9919.
**Before**
Before, first the _RNA_UI subgroup is retrieved the _RNA_UI group,
then the subgroup for the original property, then specific UI data
is accessed like any other IDProperty.
```
prop = rna_idprop_ui_prop_get(idproperties_owner, "prop_name", create=True)
prop["min"] = 1.0
```
**After**
After, the `id_properties_ui` function for RNA structs returns a python
object specifically for managing an IDProperty's UI data.
```
ui_data = idproperties_owner.id_properties_ui("prop_name")
ui_data.update(min=1.0)
```
In addition to `update`, there are now other functions:
- `as_dict`: Returns a dictionary of the property's UI data.
- `clear`: Removes the property's UI data.
- `update_from`: Copy UI data between properties,
even if they have different owners.
Differential Revision: https://developer.blender.org/D9697
Add mode to overwrite strips on overlap instead of resolving overlap.
When overlap is created, 3 things can happen:
- On partial overlap, handles of overlapped strip are moved
- On complete overlap with smaller strip, overlapped strip is split
- On complete overlap with larger strip, overlapped strip is removed
This mode can be enabled in header.
Reviewed By: fsiddi, mano-wii
Differential Revision: https://developer.blender.org/D11805
These buttons were in Meshes but not for Grease Pencil. This patch add them in order to keep consistency.
Reviewed By: HooglyBoogly
Maniphest Tasks: T90973
Differential Revision: https://developer.blender.org/D12328
The inset tool requires moving the cursor towards the center of the
selection, making it nearly impossible to use the inset tool
when the view was aligned with the vertical handle.
Use custom settings for VIEW3D_GGT_tool_generic_handle_free
to make it draw hollow, as large as the scale tool.
Resolves T87991.
Use video format for export instead of image sequence. Settings are same
as defined in h264_in_MP4 preset.
Sound default is AAC with 256kbit bitrate.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D7916
Remove `font_kerning_style` from `space_userpref.py` since this is no
longer valid.
See more details in D12276
Differential Revision: https://developer.blender.org/D12276
Reviewed by Campbell Barton
This was left over from when these scripts were loaded as modules,
where their names needed to be compatible with Pythons module naming.
Version patch existing files so text with register enabled
without a `.py` extension wont start executing on startup.
Resolves T89532.
Idea for 3.0 is to disable all functionality that isn't well polished
and focus on those parts first. Starting with poses.
* Adds a new experimental option "Extended Asset Browser", replacing
"Asset Browser".
* Unlike the previous option, this isn't enabled by default anymore.
This didn't work well in practice and caused plenty of confusion.
* "Mark as Asset" and "Clear Asset" are hidden if the option is
disabled.
* Same for the category selection in the Asset Browser.
* Always show display the "Only Assets" option in the File Browser while
browing inside .blend files. That way you can hide data-blocks that
are not pose assets.
* The Asset Library setup UI in the Preferences is always visible now,
it's needed for pose library access.
Addresses T90181, T90180 and T90300.
Differential Revision: https://developer.blender.org/D12120
bounding boxes
These are namely 'LIGHT', 'CAMERA', 'EMPTY', 'SPEAKER' and 'LIGHTPROBE'.
Note that Empties are included here despite the fact that they have
instancing capabilities ('Display As' can be 'Bounds' for example which
then displays all instanced geometry with boundingboxes -- this however
is not meant to work with the 'Bounds' checkbox and the display bounds
type, these are only affective for the object itself, not its instances)
Issue came up in T88443.
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11344
Basically, only meshes, empties and pointclouds support direct
instancing atm., no need to have the panel for other types.
note: prior to rB2eca054e14b1, collection instancing was possible on all
types (but that was removed in said commit)
note2: for empties, rna_Object_instance_type_itemf should also be
tweaked so we dont get "Vertices" and "Faces" options, but that can be
done in a separate commit
Maniphest Tasks: T88443
Differential Revision: https://developer.blender.org/D11348
Caused by {rBe3faef686d38}.
Error was getting the preview [which wasnt there yet]
These only appeared once the material tab in the Properties Editor was
used (since this ensured a valid preview icon).
Above commit changed behavior for RNA icon getter (this does not create
data anymore), so ensure the preview by hand here.
Maniphest Tasks: T89284
Differential Revision: https://developer.blender.org/D12178
To be consistent with the image editors and 3D viewport
the cursor location can be changed from the sidebar.
This was missing from the clip editor, but support has been added in this commit.
Previously, the only way to precisely set the cursor was
to call the set cursor operator then use the redo panel to adjust the value.
To be consistent with all other editors the annotation
layers pannel should be placed in a "View Tab".
In my next commit, this tab will be expanded to include other options.
- Remove check for screens being None as this would raise an error.
- Replace loop over `area.spaces` with `area.spaces.active`.
- Loop over grease pencil data directly instead of accessing
through the scenes objects.
- Split versioning into functions.
- Use `update_factory_startup_*` prefix for function names
as this isn't versioning existing files.
This commit makes the display options for mask only show in the header for the clip and image editors.
Prior to this change they would display in the header for the clip editor and in the sidebar for the image editors.
This commit does two things, first it removes the proportional editing tool settings.
This is not accessible code and is has not been used since the grease pencil/annotations changes in 2.8.
Second, this patch reorders the if statements so that the display options are always shown on the rightside.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D12163
This seems to be really old code from 2.4 or earlier.
I was unable to find when it was removed gitk and git blame both couldnt find anything.
However, it is safe to say that this code is long gone.
In the `FileList` struct, rename the `AssetLibraryReference
*asset_library` field to `asset_library_ref` -- it's a description of
which asset library is used, and not the asset library itself.
This is to make space for a future `AssetLibrary *asset_library` field,
which will point to an actual asset library struct/class.
No functional changes.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D12151
