Silences the following strict flags from external libraries:
- -Wclass-memaccess
- -Wswitch
- -Wtype-limits
- -Wint-in-bool-context
Needed to tweak macro a bit, since the old logic was wrong:
we can not use CXX flags for C compiler, need way more strict
separation between what goes where.
This will currently only work for the RelWithDebInfo configuration since asan
does not support the debug crt. for source line information in the reports,
you need a copy of llvm-symbolizer in the blender folder or set the
ASAN_SYMBOLIZER_PATH environment variable to point to it. Currently (as of
6.0.0) llvm-symbolizer does not ship with the binary clang/llvm distribution.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D3446
* Add horizontal bar at bottom of all non-temp windows, similar to the Top-bar.
* Status-bar is hidden in UI-less fullscreen mode
* Current contents are preliminary and based on T54861:
** Left: Current file-path if needed. "(Modified)" note if file was changed.
** Center: Scene statistics (like in 2.7 Info Editor).
** Right: Progress-bars and reports
* Internally managed as own "STATUSBAR" editor-type (hidden in UI).
* Like with the Top-bar, Status-bar data and SDNA writing is disabled.
* Most changes in low-level screen/area code are to support layout bounds that differ from window bounds.
Design task: T54861
Main changes approved by @brecht.
== Main Features/Changes for Users
* Add horizontal bar at top of all non-temp windows, consisting out of two horizontal sub-bars.
* Upper sub-bar contains global menus (File, Render, etc.), tabs for workspaces and scene selector.
* Lower sub-bar contains object mode selector, screen-layout and render-layer selector. Later operator and/or tool settings will be placed here.
* Individual sections of the topbar are individually scrollable.
* Workspace tabs can be double- or ctrl-clicked for renaming and contain 'x' icon for deleting.
* Top-bar should scale nicely with DPI.
* The lower half of the top-bar can be hided by dragging the lower top-bar edge up. Better hiding options are planned (e.g. hide in fullscreen modes).
* Info editors at the top of the window and using the full window width with be replaced by the top-bar.
* In fullscreen modes, no more info editor is added on top, the top-bar replaces it.
== Technical Features/Changes
* Adds initial support for global areas
A global area is part of the window, not part of the regular screen-layout.
I've added a macro iterator to iterate over both, global and screen-layout level areas. When iterating over areas, from now on developers should always consider if they have to include global areas.
* Adds a TOPBAR editor type
The editor type is hidden in the UI editor type menu.
* Adds a variation of the ID template to display IDs as tab buttons (template_ID_tabs in BPY)
* Does various changes to RNA button creation code to improve their appearance in the horizontal top-bar.
* Adds support for dynamically sized regions. That is, regions that scale automatically to the layout bounds.
The code for this is currently a big hack (it's based on drawing the UI multiple times). This should definitely be improved.
* Adds a template for displaying operator properties optimized for the top-bar. This will probably change a lot still and is in fact disabled in code.
Since the final top-bar design depends a lot on other 2.8 designs (mainly tool-system and workspaces), we decided to not show the operator or tool settings in the top-bar for now. That means most of the lower sub-bar is empty for the time being.
NOTE: Top-bar or global area data is not written to files or SDNA. They are simply added to the window when opening Blender or reading a file. This allows us doing changes to the top-bar without having to care for compatibility.
== ToDo's
It's a bit hard to predict all the ToDo's here are the known main ones:
* Add options for the new active-tool system and for operator redo to the topbar.
* Automatically hide the top-bar in fullscreen modes.
* General visual polish.
* Top-bar drag & drop support (WIP in temp-tab_drag_drop).
* Improve dynamic regions (should also fix some layout glitches).
* Make internal terminology consistent.
* Enable topbar file writing once design is more advanced.
* Address TODO's and XXX's in code :)
Thanks @brecht for the review! And @sergey for the complaining ;)
Differential Revision: D2758
Folders removed entirely:
* //extern/recastnavigation
* //intern/decklink
* //intern/moto
* //source/blender/editors/space_logic
* //source/blenderplayer
* //source/gameengine
This includes DNA data and any reference to the BGE code in Blender itself.
We are bumping the subversion.
Pending tasks:
* Tile/clamp code in image editor draw code.
* Viewport drawing code (so much of this will go away because of BI removal
that we can wait until then to remove this.
- Undo that changes modes currently asserts,
since undo is now screen data.
Most likely we will change how object mode and workspaces work
since it's not practical/maintainable at the moment.
- Removed view_layer from particle settings
(wasn't needed and complicated undo).
- Use a single undo history for all operations.
- UndoType's are registered and poll the context to check if they
should be used when performing an undo push.
- Mode switching is used to ensure the state is correct before
undo data is restored.
- Some undo types accumulate changes (image & text editing)
others store the state multiple times (with de-duplication).
This is supported by checking UndoStack.mode `ACCUMULATE` / `STORE`.
- Each undo step stores ID datablocks they use with utilities to help
manage restoring correct ID's.
Needed since global undo is now mixed with other modes undo.
- Currently performs each undo step when going up/down history
Previously this wasn't done, making history fail in some cases.
This can be optimized to skip some combinations of undo steps.
grease-pencil is an exception which has not been updated
since it integrates undo into the draw-session.
See D3113
- See `--log` help message for usage.
- Supports enabling categories.
- Color severity.
- Optionally logs to a file.
- Currently use to replace printf calls in wm module.
See D3120 for details.
We've got quite comprehensive BMesh based implementation, which is way easier
for maintenance than abandoned Carve library.
After all the time BMesh implementation was working on the same level of
limitations about manifold meshes and touching edges than Carve. Is better
to focus on maintaining one boolean implementation now.
Reviewers: campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D3050
This patch changes the huge list of projects in visual studio into a nice tree matching the source folder structure. see D2823 for details.
Differential Revision: http://developer.blender.org/D2823
cmake's link_directories will supply forward slashes for the search paths, the msvc linker has some issues with that, while it will search for the needed libs just fine, the incremental linker gets fed forward slashes for some libs, while the previous binary has backward slashes in it's metadata, the linker assumes obj files got added and performs a full link instead of an incremental link. This change brings down the link time with newer msvc versions for a trivial edit down from a few minutes to a few seconds.
It has been deprecated since at least macOS 10.9 and fully removed in 10.12.
I am unsure if we should remove it only in 2.8. But you cannot build blender with it supported when using a modern xcode version anyway so I would tend towards just removing it also for 2.79 if that ever happens.
Reviewers: mont29, dfelinto, juicyfruit, brecht
Reviewed By: mont29, brecht
Subscribers: Blendify, brecht
Maniphest Tasks: T52807
Differential Revision: https://developer.blender.org/D2333
Deleting the old internal audaspace.
Major changes from there are:
- The whole library was refactored to use C++11.
- Many stability and performance improvements.
- Major Python API refactor:
- Most requested: Play self generated sounds using numpy arrays.
- For games: Sound list, random sounds and dynamic music.
- Writing sounds to files.
- Sequencing API.
- Opening sound devices, eg. Jack.
- Ability to choose different OpenAL devices in the user settings.
Initial support for Python/Manipulator integration
from 'custom-manipulators' branch.
Supports:
- Registering custom manipulators & manipulator-groups.
- Modifying RNA properties, custom values via get/set callbacks,
or invoking an operator.
- Drawing shape presets for Python defined manipulators (arrow, circle, face-maps)
Limitations:
- Only float properties supported.
- Drawing only supported via shape presets.
(we'll likely want a way to define custom geometry or draw directly).
- When to refresh, recalculate manipulators will likely need
integration with notifier system.
Development will be continued in the 2.8 branch
As with operators, the window-manager has the API for defining,
the editor can implement and register its own manipulators.
This exposes wmManipulator, keeping it opaque isn't
practical if editors and Python are to implement their own.
