* Use simple default view transform for color pickers, as Filmic does not work
well for all types of colors. We better handle this with an option and tagging
of colors as emissive or albedo like.
* For solid/workbench we also no longer use Filmic, as there is not enough contrast
and it's not really needed since this is not physically based lighting.
* For lookdev always take into account the view transform and look. Other view
settings like exposure are only taken into account if scene lighting is used,
since these are often dependent on scene light intensity.
Fixes T61022, T57649, T59363.
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
Some features are incompatible with multithreading and reliable evaluation
of dependencies. We are now removing them as part of a bigger cleanup to
fix bugs in keyframing and invalid animation evaluations.
* Dupliframes have been removed. This was a hack added before there were
more powerful features like the array modifier.
* Slow parent has been removed, never worked in 2.8. It was always
unreliable for use in production due to depending on whatever frame was
previously evaluated, which was not always the previous frame.
* Particle instanced objects used to have their transform evaluated at
the particle time. Now it always gets the current time transform.
* Boids can no longer do predictive avoidance of force field objects,
but still for other particles.
Differential Revision: https://developer.blender.org/D4274
Issue actually exists since ages, probably 2.7x update system forced all
armature proxies to be fully refreshed after an undo?
In any case, proxy_from should only be reset for 'local' proxies (i.e.
directly linked datablocks), not for linked proxies...
This commit adds another optional check (when `--debug-io` is set) on
write .blend process, to check and ensure all shape keys have their
'from' pointer properly set to their respective user ID.
This is intended to be used as debuging tool mostly (to try to detect
when/why some of those pointers can become NULL).
For now, it also systematically perform same checks/fixes when loading a
.blend file, to fix all broken ones laying around. Later we might move
that usage to a do_version instead, but for now think it's safer to
always perfom it (and it's rather cheap process anyway).
Does not make sense to keep that with BLO_writefile.h, this can also be
used by read code, and some other parts of Blender (like ed_undo.c
currently)...
Allows users to select a font for text strips in the video sequence editor.
Related: 3610f1fc43 Sequencer: refactor clipboard copy to no longer increase user count.
Reviewed by: Brecht
Differential Revision: https://developer.blender.org/D3621
Having clipping limit selection and tools is confusing when not visible.
Disable on load until it's supported
(doing this via ifdef's isn't practical).
Fixes T59580
Some of Eevee's Bloom defaults are not very good for physically based rendering. This patches addresses this issue.
This picture shows one of the problems with current default. Bloom looks very foggy:
{F6280495}
Even worse, light emitters much dimmer than the Sun can make everything equally hazy if Clamp is set to 1.0 and intensity to 0.8 (current default). Artists often forget to adjust Clamp value and do not know what value to use for realistic intensity. Also, currently both Clamp and Intensity do not have good UI ranges. This is why often Eevee renders end up very hazy and bloom often does not look right.
Bloom effect plays important role to help to distinguish between bright and relatively dim light sources. With current defaults this is broken because Clamp set to 1.0. Also, it cannot be disabled if set to 0 like expected. This patch fixes this and sets it to 0 by default. If users need to clamp, they can do so easily with UI range up to 1000. This range is good enough for most cases and provides enough precision to control lower values, and the highest value helps to limit bloom from the Sun if necessary and will leave untouched most other light emitters. If needed, much higher values for Clamp can be entered manually up to 100000. 10000 is still affects the Sun, but up to 100000 highest limit allows to clamp anything that is much brighter than the Sun if user needs to limit bloom in such cases (for example, bright explosion in the sky or anything else very bright).
I propose new default for bloom Intensity - 0.05 and UI range to suggests realistic values. Bloom Intensity > 0.1 is not realistic for clean lens but the user can enter manually much larger values if needed.
For comparison, here is a my own photo with and without bloom caused by the Sun (on second photo the Sun was occluded with an object).
{F6280500}
{F6280492}
In real life bloom is much more subtle and does not look hazy. If Clamp is disabled, then out of 0.1, 0.05 and 0.025 values I have tried, 0.05 looks most similar to the photo. Here is test render with and without bloom with the Sun in similar position like on the photo:
{F6280496}
{F6280494}
Using color probe 27x27 I compared lightness below the horizon under the Sun. In rendered by Eevee images lightness difference was 17. In case of the photos lightness difference in similar place was 11. I then compared leftmost spot (also below the horizon) and lightness difference was approximately 2 between two photos and 1 between rendered images. In other words, with these settings bloom effect is not too strong and is not too weak. Visually it may seem like decreasing bloom intensity may increase photorealism, but then bloom effect would be too localized even for the Sun.
Besides this single test, I tested in many other scenes as well, with and without the Sun, with different HDRIs, and as far as I can tell 0.05 intensity turned out to be good default - it produces bloom strong enough to be noticeable and not too hazy.
In Cycles shutter default value is 0.50, so for consistency set to 0.5 by default in Eevee too. Besides, 0.5 is typical standard for real cameras, and values higher than 0.5 usually are needed only if very strong motion blur is desired.
Here is summary of all changes:
Bloom Intensity: 0.8 > 0.05
Bloom Intensity UI range: 0-10 > 0-0.1
Bloom Clamp: 1.0 > 0.0 (disabled by default)
Bloom Clamp manual range: 0-1000 > 0-100000
Bloom Clamp UI range: 0-10 > 0-1000
Shutter: 1.0 > 0.5
This patch is related to the discussion in this thread, there are more examples of what bloom will look like with 0.05 intensity by me and others:
https://devtalk.blender.org/t/eevee-needs-to-have-physically-based-defaults/4700
Reviewers: fclem
Reviewed By: fclem
Subscribers: pablovazquez, billreynish, rboxman
Tags: #eevee
Differential Revision: https://developer.blender.org/D4212
This further changes the preferences organization, to avoid grouping unrelated
settings together. With more sections we can also expand more panels by default,
making it possible to quickly go through sections and see the settings of each.
Panels with less used settings are still collapsed by default, to keep all panel
headers visible without scrolling.
Differential Revision: https://developer.blender.org/D4216
That one was used to allow specifying in system console a new path for
missing libraries, when loading a .blend file.
We now have a much more easy and user-friendly way of repairing missing
linked datablocks/libraries, so this is not needed anymore.
This commit makes it so OpenSubdiv's topology refiner is kept
in memory and reused for until topology changes. There are the
following modifications which causes topology refiner to become
invalid:
- Change in a mesh topology (for example, vertices, edges, and
faces connectivity).
- Change in UV islands (adding new islands, merging them and
so on),
- Change in UV smoothing options.
- Change in creases.
- Change in Catmull-Clark / Simple subdivisions.
The following limitations are known:
- CPU evaluator is not yet cached.
- UV islands topology is not checked.
The UV limitation is currently a stopper for making this cache
enabled by default.
Allows users to select a font for text strips in the video sequence editor.
Related: 3610f1fc43 Sequencer: refactor clipboard copy to no longer increase user count.
Reviewed by: Brecht
Differential Revision: https://developer.blender.org/D3621
This commit groups a set of new tools that were tested in grease pencil object branch before moving to master. We decide to do all the development in a separated branch because it could break master during days or weeks before the new tools were ready to deploy.
The commit includes:
- New Cutter tool to trim strokes and help cleaning up drawings.
- New set of constraints and guides to draw different types of shapes. All the credits for this development goes to Charlie Jolly (@charlie), thanks for your help!
- Segment selection mode to select strokes between intersections.
- New operator to change strokes cap mode.
- New option to display only keyframed frames. This option is very important when fill strokes with color.
- Multiple small fixes and tweaks.
Thanks to @pepeland and @mendio for their ideas, tests, reviews and support.
Note: Still pending the final icons for Cutter in Toolbar and Segment Selection in Topbar. @billreynish could help us here?
TH_BACK was being used when drawing the 3D view even though
there was no way to set the color in the preferences.
The color was zero'd when moving to the new 2.8x theme.
Having both gradient and background colors was confusing,
especially having to use 'TH_HIGH_GRAD' for the 3D view, 'TH_BACK' for
other views.
Move the background color back to 'TH_BACK', 'TH_BACK_GRAD' is used
when gradients are enabled.
RNA is unchanged so presets don't need updating.
When holding down the key for a while, the pie menu will disappear when
releasing the key. This is under the assumption that in this case the user
decided to cancel the action.
Differential Revision: https://developer.blender.org/D4180
- When toggling a mode that doesn't support multi editing
only do this once of the active object.
- For sculpt mode create sculpt data since this is needed
for activating other sculpt objects on reload.
This reverts commit 4d8ed937f2.
An alternative fix will come soon as a patch, since this introduced an issue.
Rolling back since the original fix (sculpt cursor on load) is less important
than the issue it introduced (crash on weight paint undo/redo).
Fix T60322.
In a77b63c569, the Preferences navigation region background was
made brighter. Recently stored userpref.blends (since b00963afc1,
so beta release included) would still use the slightly darker
background for the Preferences navigation region.
Now the version patch added for a77b63c569 also sets the new color
for those recent configs.
