Added compareDrawSettings callback to driver mesh's callbacks which are
drawing textured faces (mapped and not mapped). This new callback checks
if two faces are drawing with the same settings (testures, shading etc)
and if they not, flush of faces happens into ogl using glDrawArrays and
next face would be drawn with it's own settings.
Currently implemented compareDrawSettings is used to resolve issue from
bug report only, probably there are extra places where this callback is
needed, but haven't seen configuration where current logic will fail,
so it should be ok.
Also reordered arguments passing to drawMappedFaces DM's callbacks,
so now all drawing callback are accepting list of callbacks and then
userData, instead of using mixed order of callbacks and userData which
was a bit confusing to work with.
This commit fixes:
- #26410: VBO & multitexture doesnt work
- #29464: VBO enabled causes UV coruption
effect for a render engine using new shading nodes. In short:
* No longer uses images assigned to faces in the uv layer, rather the active
image texture node is what is edited/painted/drawn.
* Textured draw type now shows the active image texture node, with solid
lighting.
* Material draw mode shows GLSL shader of a simplified material node tree,
using solid lighting.
* Textures for modifiers, brushes, etc, are now available from a dropdown in
the texture tab in the properties editor. These do not use new shading nodes
yet.
http://wiki.blender.org/index.php/Dev:2.6/Source/Render/TextureWorkflow
- only pass if the mesh has vertex colors to drawParams() rather then the mcol its self, this saves a lookup on the color.
- drawing textures in editmode with no vertex colors would still lookup vertex colors on each face, instead cache this info for all faces.
Added callback to drawMappedFaces which checks if two faces have got equal draw options.
After discussion with Brecht we found it's nicest solution for now:
- Disabling VBOs in edit mode for this case wouldn't be nicer for this case -
some additional flag stored in DM should be added in this case.
- Adding new callback in DM isn't nicer that this solution.
- Handling face selection in drawobject would lead to duplicated code
which is also not nice.
Hopefully, this callback could handle all cases in the future.
Also, Brecht mentioned current VBO implementation isn't perfect, so maybe
when we'll redesign this area dealing with edit mode wouldn't be so tricky.
Removed the DerivedMesh face iterators (they sucked).
This should make subsurf faster. Also sped up multires
a bit (not sure if it's strictly correct, need to look
at it later).
weighted normals as the render engine, and the render engine will copy
normals from the mesh rather than always recalculating them.
Subsurf/multires still use regular vertex normals, but they are expected
to be sufficiently high resolution to not need this.
This means that normal maps displayed in the viewport actually match the
render engine exactly and don't have artifacts due to this discrepancy.
It of course also avoids unexpected surprises where your render normals
look different than your viewport normals.
Subversion bumped to 4 for version patch to recalculate normals.
Patch by Morten Mikkelsen, with some small changes.
the two files mikktspace.h and mikktspace.c. These are standalone files
which can be redistributed into any other application and regenerate the
same tangent spaces. The implementation is independent of the ordering
of faces and the vertex ordering of faces.
==========================
Removed limitation of armatured-only objects for sculpting -- now all
deformation modifiers are allowed in sculpt mode. Use crazyspace corrections
like from transformation modules was used to support all deformation modifiers.
Internal change: all crazyspace-related functions were noved to crazyspace.c
P.S. Brush could make quite unexpected deformation for meshes which are
deformed in specified way. Got patch for this and discussing with Brecht
if it's really needed or maybe it could be done in better way.
Used a crazyspace approach (like in edit mode), but only modifiers with
deformMatricies are allowed atm (currently shapekeys and armature modifiers only).
All the rest modifiers had an warning message that they aren't applied because
of sculpt mode. Deformation of multires is also unsupported.
With all this restictions users will always see the actual "layer" (or maybe
mesh state would be more correct word) they are sculpting on.
Internal changes:
- All modifiers could have deformMatricies callback (the same as deformMatriciesEM but
for non-edit mode usage)
- Added function to build crazyspace for sculpting (sculpt_get_deform_matrices), but it
could be generalized for usage in other painting modes (particle edit mode, i.e)
Todo:
- Implement crazyspace correction to support all kinds of deformation modifiers
- Maybe deformation of multires isn't so difficult?
- And maybe we could avoid extra bad-level-stub for ED_sculpt_modifiers_changed
without code duplicating?
Support for physics is done by skiping the modifiers that
don't support mapping to original mesh. This mapping is
required to report the hit polygon to the application
by the rayCast() function.
Support for graphics is done by using the same render
function that blender uses for the 3D view. This guantees
equal result.
Limitation: there is still a known bug if all these conditions are met:
- Display list enabled
- Old tex face with a several textures mapped to the same material
- no armature or shape keys
- active modifiers
In this case, only a part of the mesh will be rendered
with the wrong texture. To avoid this bug, use the GLSL
materials or make sure to have 1 material=1 texture in
your old tex face objects.
This is a more general problem that drawing functions would skip faces when the original index could not be found, screw result for example wasnt visible in editmode too.
Fixed by adding a material set argument to DerivedMesh->drawMappedFaces(), this was already being done in some of the other drawing functions.
- vertex normals were not being flipped (though faces are)
- rim faces didnt influence edge vertex normals
apply solidify on top of solidify modifier now works correctly
Used approach with creating DerivedMesh for curves whet they've got such modifiers.
Available modifiers are: array, edge split, mirror, solidify, subsurf.
I've removed editmesh altogether (other then scanfill, which is
seperate code that happens to reuse the editmesh structures).
The compatibility layer I had written for old editmesh tools
was more trouble then it was worth, though it did help in the
early stages of this project.
There's a fair amount of breakage, and there's bunches of tools
(mostly minor ones) I need to port over still. Biggest ones are
join triangles and loop to region, and spin/screw.
This probably isn't really testable, I'll hopefully have more
work done on this soon, but might not be before next week.
levels, child particles, and shadow/SSS/AO quality.. Now also works on what
is displayed in the 3d view instead of only rendering, see panel in the scene
properties.
Most file changes were to make scene available in the isDisabled modifier
callback function.
Fix#20516: subsurf modiefier+pressing add for smoke sims results in crash.
Fix retopo not working correct on subsurf mesh.
Various deforming modifiers were not correctly taking into account that a
derivedmesh is not necessarily a CDDerivedMesh, made utility functions for
this now.
Most likely will not compile for others, I'd appreciate any build errors
and missing files reports (I can never seem to get everything committed
and all the build systems working without help).
Porting over the sculpt/multires tools was a breeze,
thanks goes to brecht for a design that didn't exclude
ngons and was easy to port.
Note that I've not tested externally-backed multires
file support yet. Also, I still need to write version
patch code for some cases.
Some notes:
* Like trunk, topological changes don't update multires right,
so e.g. subdivide will duplicate multires data on the new faces,
instead of subdividing it.
* If you set the debug value (ctrl-alt-d) to 1 it'll turn on
my experiments in speeding up sculpting on higher-res multires
meshes (but note it makes partial redraw not completely accurate).
* There's a bug where you have to go through editmode to get out
of sculpt mode, not sure if I inherited or created this myself.
* Fix#20482: grab brush + size pressure sensitivity don't work
together, disabled the pressure sensitivty for that case now.
* Fix for smooth brush messing up mesh sometimes, smooth factor
is now clamped to reasonable range.
* Fix#20449: smooth brush + mirror modifier could crash.
