This is much more flexible solution which will allow doing some
more procedural features.
Reviewers: brecht, dfelinto, mont29
Reviewed By: mont29
Subscribers: Severin
Differential Revision: https://developer.blender.org/D2403
This gives us 9 flags available again for properties (we had none anymore),
and also makes things slightly cleaner.
To simplify (and make more clear the differences between mere properties
and function parameters), also added RNA_def_parameter_flags function (and
its clear counterpart), to be used instead of RNA_def_property_flag for
function parameters.
This patch is also a big cleanup (some RNA function definitions were
still using 'prop' PropertyRNA pointer, etc.).
And yes, am aware this will be annoying for all branches, but we really need
to get new flags available for properties (will need at least one for override, etc.).
Reviewers: sergey, Severin
Subscribers: dfelinto, brecht
Differential Revision: https://developer.blender.org/D2400
The idea is simple: cache PD resolution from cache_point_density() RNA
function because that one is supposed to be called while database is
locked for original synchronization.
Ideally we would also pass array size to the sampling function, but
it turned out to be quite problematic because API only accepts int type
and passing size_t might cause some weird behavior.
This commit adds a new distribution to the Glossy, Anisotropic and Glass BSDFs that implements the
multiple-scattering microfacet model described in the paper "Multiple-Scattering Microfacet BSDFs with the Smith Model".
Essentially, the improvement is that unlike classical GGX, which only models single scattering and assumes
the contribution of multiple bounces to be zero, this new model performs a random walk on the microsurface until
the ray leaves it again, which ensures perfect energy conservation.
In practise, this means that the "darkening problem" - GGX materials becoming darker with increasing
roughness - is solved in a physically correct and efficient way.
The downside of this model is that it has no (known) analytic expression for evalation. However, it can be
evaluated stochastically, and although the correct PDF isn't known either, the properties of MIS and the
balance heuristic guarantee an unbiased result at the cost of slightly higher noise.
Reviewers: dingto, #cycles, brecht
Reviewed By: dingto, #cycles, brecht
Subscribers: bliblubli, ace_dragon, gregzaal, brecht, harvester, dingto, marcog, swerner, jtheninja, Blendify, nutel
Differential Revision: https://developer.blender.org/D2002
The improved Hosek / Wilkie model was added during my GSoC 2013 and the default since then.
The older model was kinda kept for compatibility, but after more than 2 years it's time to remove it.
The Hosek / Wilkie model is more realistic anyway, and people who really want a day / night transition can mix the Sky Shader with another one (e.g. color) and fade between the two.
This patch adds support for coloring point density textures based on several mesh vertex attributes.
* Vertex Color: Use a vertex color layer for coloring the point density texture
* Vertex Weight: Use a weights from a vertex group as intensity values. (for Blender Render engine the additional color band is used)
* Vertex Normals: Use object-space vertex normals as RGB values.
The vertex color source enum is stored separately from the particle color source, to avoid invalid values when switching.
Note that vertex colors are technically "corner colors" (MLoop), so each vertex can have as many colors as faces it is part of.
For the purpose of point density the mloop colors are simply averaged, which is physically plausible because corners can be viewed
as multiple points in the same location.
This was we don't have re-compo or viewport re-rendering happening when changing
nodes which are not connected to the output at all (for example when adding new
nodes or changing settings for unconnected nodes).
Only basic operations are covered for now. checks could be added to more tools
when needed.
Currently it's not fully optimal implementation, but seems to work fast enough.
Don't see reliable alternative to that -- keeping tag in the node wouldn't work
because of the node groups (which are probably already broken, but should be
easy to solve with current approach). So guess it's more matter of optimizing
path search from a node to output.
Before processing forward let's check whether it's indeed something we want
and whether the approach is indeed not fully bad.
Reviewers: campbellbarton, mont29
Subscribers: sebastian_k
Differential Revision: https://developer.blender.org/D1765
The issue was happening when having unconnected point density which
will cache data but will not free it because there's no actual call
to the actual sampling.
Now the idea is to make sure cache is zeroed on file load and undo
and then caching via RNA will free the data if any exists. This could
leave us with a single copy of cache in the node if it's not used,
but it's quite small amount of memory and it's not leaking.
The issue was caused by different AABB used by Cycles and texture sampler.
Instead of trying to keep this two functions in sync we now do have an
utility call in the point density node to query the AABB.
It is handy when doing some roto work and it's required to blur some
mask or overaly before alpha-overing it on top of the footage.
Quite straightforward option with the only limitation that variable
size blur is not supported.
Reviewers: campbellbarton
Subscribers: hype, sebastian_k
Differential Revision: https://developer.blender.org/D1663
This commit adds "Bands Saw" and "Rings Saw" to the options for the Wave texture node in Cycles, behaving similar to the Saw option in BI textures.
Requested by @cekuhnen on BA.
Reviewers: dingto, sergey
Subscribers: cekuhnen
Differential Revision: https://developer.blender.org/D1699
Nodes have a feature for moving existing links to unoccupied sockets when connecting
to an already used input. This is based on the standard legacy socket types (value/float,
vector, color/rgba) and works reasonably well for shader, compositor and texture nodes.
For new pynode systems, however, the hardcoded nature of that feature has major drawbacks:
* It does not take different type systems into account, leading to meaningless connections
when sockets are swapped and making the feature useless or outright debilitating.
* Advanced socket behaviors would be possible with a registerable callback, e.g. creating
extensible input lists that move existing connections down to make room for a new link.
Now any handling of new links is done via the 'insert_links' callback, which can also be
registered through the RNA API. For the legacy shader/compo/tex nodes the behavior is the
same, using a C callback.
Note on the 'use_swap' flag: this has been removed because it was meaningless anyway:
It was disabled only for the insert-node-on-link feature, which works only for
completely unconnected nodes anyway, so there would be nothing to swap in the first place.
The issue was caused by possible use of object->derivedFinal from the render
thread, The patch tries to eliminate (or at least minimize, huh) amount of
access to the derivedFinal of a source object. It's still possible that in
the case of particle source derived mesh will be still unsafely used, but
with the patch applied we can easily change runtime part of the code and
cache derived mesh on the preparation stage.
Some ideas for the future:
- Check whether cache() was called on the point density node when calling
calc().
- Cache derivedMesh in the runtime part of point density node to avoid
possible remained thread conflicts.
- NULL the runtime part of the node on .blend load
Reviewers: campbellbarton, plasmasolutions
Reviewed By: plasmasolutions
Differential Revision: https://developer.blender.org/D1614
This appears to be really common workflow when you stabilize shot to make compo
easier (roto, some effects and so) and then re-introduce the motion back.
Surely it's doable with some magic nodes and manual network for transforming
but such workflow is too common in VFX to resist adding one small option in
single node for this.
This commit exposes the interpolation parameter for environment textures (requested by DolpheenDream on IRC), just as it already is for image textures.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D1544
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
Technically it was all wrong and it should have been called Extend instead
of Clip. Got confused by the naming in different libraries.
More options are still to come.
That was basically not an issue with interpolation, but rather missing wrapping
options and periodic wrapping was always used.
It's still a bit questionable why certain graphics cards were doing clamping in
the file from the report, that's not something what is expected to happen from
the settings of textures being passed to GPU. In any case this issue i still
didn't manage to reproduce on any of the available GPUs, might be something
related on driver glitch or so.
In any case CPU now should behave just fine, rest of the issues we'll need to be
able to reproduce first.
This commit implements point density texture for Cycles shading nodes.
It's done via creating voxel texture at shader compilation time, Not
totally memory efficient, but avoids adding sampling code to kernel
(which keeps render time as low as possible), In the future this will
be compensated by using OpenVDB for more efficient storage of sparse
volume data.
Sampling of the voxel texture is happening at blender side and the
same code is used as for Blender Internal's renderer.
This texture is controlled by only object, particle system and radius.
Linear falloff is used and there's no turbulence. This is because
falloff is expected to happen using Curve Mapping node. Turbulence
will be done as a distortion on the input coordinate. It's already
possible to fake it using nose textures and in the future we can add
more proper turbulence distortion node, which then could also be used
for 2D texture mapping.
Particle color support is done by Lukas, thanks!
Official Documentation:
http://www.blender.org/manual/render/workflows/multiview.html
Implemented Features
====================
Builtin Stereo Camera
* Convergence Mode
* Interocular Distance
* Convergence Distance
* Pivot Mode
Viewport
* Cameras
* Plane
* Volume
Compositor
* View Switch Node
* Image Node Multi-View OpenEXR support
Sequencer
* Image/Movie Strips 'Use Multiview'
UV/Image Editor
* Option to see Multi-View images in Stereo-3D or its individual images
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
I/O
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
Scene Render Views
* Ability to have an arbitrary number of views in the scene
Missing Bits
============
First rule of Multi-View bug report: If something is not working as it should *when Views is off* this is a severe bug, do mention this in the report.
Second rule is, if something works *when Views is off* but doesn't (or crashes) when *Views is on*, this is a important bug. Do mention this in the report.
Everything else is likely small todos, and may wait until we are sure none of the above is happening.
Apart from that there are those known issues:
* Compositor Image Node poorly working for Multi-View OpenEXR
(this was working prefectly before the 'Use Multi-View' functionality)
* Selecting camera from Multi-View when looking from camera is problematic
* Animation Playback (ctrl+F11) doesn't support stereo formats
* Wrong filepath when trying to play back animated scene
* Viewport Rendering doesn't support Multi-View
* Overscan Rendering
* Fullscreen display modes need to warn the user
* Object copy should be aware of views suffix
Acknowledgments
===============
* Francesco Siddi for the help with the original feature specs and design
* Brecht Van Lommel for the original review of the code and design early on
* Blender Foundation for the Development Fund to support the project wrap up
Final patch reviewers:
* Antony Riakiotakis (psy-fi)
* Campbell Barton (ideasman42)
* Julian Eisel (Severin)
* Sergey Sharybin (nazgul)
* Thomas Dinged (dingto)
Code contributors of the original branch in github:
* Alexey Akishin
* Gabriel Caraballo
