There was an inconsistency between geometry sample nodes and mesh/curve
sample nodes, where the latter didn't have a special "Sample" category,
and we categorized as "Operations", which they were not. Also put the
sample category between "Read" and "Write" since the verb name is
more consistent and sampling is an advanced form of reading.
The operator has the option to add to selected FCurves instead
of only the active, but it was only exposed in the redo panel.
This patch adds the operator to the right-click menu on FCurve channels,
and to the channel menu in the Graph editor.
Both times with configured to add to selected
instead of only the active FCurve
Revied by Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D17066
Ref: D17066
- Replace type annotations with doc-strings, the current conventions is
not to use type annotations in startup scripts.
- Replace abbreviation "idx" with "index" in public arguments/properties.
- Replace `len(..) > 0` with boolean checks.
- Add `__all__` to list public members.
- Use `arg` instead of `param` for doc-strings.
- Locate the doc-string so it shows as `__doc__`.
Adds two operators to select linked vertices in weight paint mode.
Similar to how it works in edit mode.
Press "L" to select vertices under the cursor,
or CTRL + "L" to select anything linked to the current selection.
Reviewed by: Sybren A. Stüvel, Hans Goudey, Marion Stalke
Differential Revision: https://developer.blender.org/D16848
Ref: D16848
In the previous situation the message was shown for Apple devices.
But this is not correct and confusing.
- Apple with Metal backend are supported, OpenGL on Apple isn't
- Legacy devices on Windows or Linux are also not supported.
This change will check that the capabilities of the GPU match the
requirements to use Viewport compositor. Based on those capabilities
a message is shown and the panel is activated.
Extract:
- EEVEE: Compiling Shaders (the same message exists in EEVEE Next, but
it uses string concatenation and I don't know yet how to deal with
those--see T92758)
Disambiguate:
- Pan (audio, camera)
- Box (TextSequence)
- Mix (noun in constraints, GP materials)
- Volume (object type, file system)
- Floor (math integer part, 3D viewport horizontal plane)
- Impossible to disambiguate the constraint name because
bConstraintTypeInfo doesn't have a context field.
- Show Overlay (in the sequence editor, use the same message as other
editors to avoid a confusion with the Frame Overlay feature, also
called "Show Overlay")
Additionally, fix a few issues reported by Joan Pujolar (@jpujolar)
in T101830.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D17114
This operator updates scene strip internal length to reflect target
scene length. Previously scene strip had to be deleted and added from
scratch. Scene strip length in timeline will not be changed.
This adds a new operator: bpy.ops.mesh.flip_quad_tessellation()
This operator rotates the internal loops of the selected quads, allowing
the user to control tessellation without destructively altering the
mesh.
{F14201995}
This operator can be found in the "Face" menu (Ctrl+F) under "Face
Data".
{F14201997}
Reviewed By: campbellbarton, dbystedt
Differential Revision: https://developer.blender.org/D17056
This patch adds a draw_ui_list() function, which is a wrapper around
layout.template_list(). It implements generic add/remove/move buttons,
passing the correct "row" integer to template_list(), as well as a
drop-down menu, if provided, making it a complete solution for
consistent UILists for addons.
Differential Revision: https://developer.blender.org/D14119
Based on T99607:
- Existing Angle Control shortcuts are removed
- Voxel, Dyntopo and Hair resolution shortcuts are remapped to `R`
Since voxel remeshing is not compatible with dyntopo, each can use the shortcut `R` for the remeshing resolution without causing a conflict.
The shortcut `R` is not currently used for anything important.
The angle control menu is commonly not used.
And sculpt mode is only coincidentally inheriting the rotate operator shortcut on `R` because nothing else is mapped to the key.
Reviewed By: Julien Kaspar and Hans Goudey and Joseph Eagar
Differential Revision: https://developer.blender.org/D16511
Ref D16511
This addressed feature request T99811.
Added the following features to fully support importing USDZ archives:
- Added .usdz to the list of supported extensions.
- Added new USD import options to copy textures from USDZ archives. The
textures may be imported as packed data (the default) or to a directory
on disk.
- Extended the USD material import logic to handle package-relative texture
assets paths by invoking the USD asset resolver to copy the textures from
the USDZ archive to a directory on disk. When importing in Packed mode,
the textures are first saved to Blender's temporary session directory
prior to packing.
The new USD import options are
- Import Textures: Behavior when importing textures from a USDZ archive
- Textures Directory: Path to the directory where imported textures will
be copied
- File Name Collision: Behavior when the name of an imported texture file
conflicts with an existing file
Import Textures menu options:
- None: Don't import textures
- Packed: Import textures as packed data (the default)
- Copy: Copy files to Textures Directory
File Name Collision menu options:
- Use Existing: If a file with the same name already exists, use that
instead of copying (the default)
- Overwrite: Overwrite existing files
Reviewed by: Bastien
Differential Revision: https://developer.blender.org/D17074
This commit fixes T100674, Renamed the "axis" label under viewport display
panel to "axes" in object properties.
Differential Revision: https://developer.blender.org/D16650
Rewrite of the Workbench engine using C++ and the new Draw Manager API.
The new engine can be enabled in Blender `Preferences > Experimental > Workbench Next`.
After that, the engine can be selected in `Properties > Scene > Render Engine`.
When `Workbench Next` is the active engine, it also handles the `Solid` viewport mode rendering.
The rewrite aims to be functionally equivalent to the current Workbench engine, but it also includes some small fixes/tweaks:
- `In Front` rendered objects now work correctly with DoF and Shadows.
- The `Sampling > Viewport` setting is actually used when the viewport is in `Render Mode`.
- In `Texture` mode, textured materials also use the material properties. (Previously, only non textured materials would)
To do:
- Sculpt PBVH.
- Volume rendering.
- Hair rendering.
- Use the "no_geom" shader versions for shadow rendering.
- Decide the final API for custom visibility culling (Needed for shadows).
- Profile/optimize.
Known Issues:
- Matcaps are not loaded until they’re shown elsewhere. (e.g. when opening the `Viewort Shading` UI)
- Outlines are drawn between different materials of the same object. (Each material submesh has its own object handle)
Reviewed By: fclem
Maniphest Tasks: T101619
Differential Revision: https://developer.blender.org/D16826
This adds the following operators to edit mode:
- `select_all`
- `select_random`
- `select_end`
Differential Revision: https://developer.blender.org/D17047
This adds a new `Interpolate Curves` node. It allows generating new curves
between a set of existing guide curves. This is essential for procedural hair.
Usage:
- One has to provide a set of guide curves and a set of root positions for
the generated curves. New curves are created starting from these root
positions. The N closest guide curves are used for the interpolation.
- An additional up vector can be provided for every guide curve and
root position. This is typically a surface normal or nothing. This allows
generating child curves that are properly oriented based on the
surface orientation.
- Sometimes a point should only be interpolated using a subset of the
guides. This can be achieved using the `Guide Group ID` and
`Point Group ID` inputs. The curve generated at a specific point will
only take the guides with the same id into account. This allows e.g.
for hair parting.
- The `Max Neighbors` input limits how many guide curves are taken
into account for every interpolated curve.
Differential Revision: https://developer.blender.org/D16642
The name SAFE_AREAS_OT_preset_add lead to "Safe Areas" having it's own
section in the operator API docs. Name CAMERA_OT_safe_areas_preset_add
instead. Keep "safe_areas" as the preset directory for users with
existing presets.
The Grease Pencil Material Popover currently has a color picker
for the Stroke of a Material using Solid style, but not one for
a Fill using Solid style.
With the default Grease Pencil Materials, the current
popover only shows the Stroke color for the grey "Solid Fill"
material (which doesn't have its Stroke enabled) instead of
the more useful Fill color.
This patch shows a Stroke color picker when the Material
has Stroke enabled and the style is Solid.
This is the same for the Fill.
Reviewed By: antoniov, mendio
Differential Revision: https://developer.blender.org/D17004
A proper boolean custom property type is commonly requested. This
commit simply adds a new `IDP_BOOLEAN` type that can be used for
boolean and boolean array custom properties. This can also be used
for exposing boolean node sockets in the geometry nodes modifier.
I've just extended the places existing IDProperty types are used, and
tested with the custom property edit operator and the python console.
Adding another IDProperty type is a straightforward extension of the
existing design.
Differential Revision: https://developer.blender.org/D12815
The menus are growing too large. This patches move some categories under
sub-menus, and shuffle some entries around.
We already had sub-categories split by separators. This change now
goes a step further and embrace 3-level menus.
Inspired by the "Simpler Add Menu" add-on by Quackers (waiting to hear
back to know Quackers real name).
Inspired by the "Simpler Add Menu" add-on by Alfonso Martinez II.
Differential Revision: https://developer.blender.org/D16993
Added an extrude mode enum to the trim operators to
control extrusion: "project" and "fixed." "Fixed" just
extrudes along a fixed normal and is the new default.
An apostrophe should not be used because it is not a mark of plural,
even for initialisms. This involves mostly comments, but a few UI
messages are affected as well.
Differential Revision: https://developer.blender.org/D16749
Set origin and convert operator now accepts point cloud and new curve
object. But these operators were not added in context menu.
Support for set origin and convert operator was added in
rBadb4dd911b91, rB933d56d9e98d and rB2752a88478a8
Reviewed by: HooglyBoogly
Differential Revision: https://developer.blender.org/D16939
Currently the `MLoopUV` struct stores UV coordinates and flags related
to editing UV maps in the UV editor. This patch changes the coordinates
to use the generic 2D vector type, and moves the flags into three
separate boolean attributes. This follows the design in T95965, with
the ultimate intention of simplifying code and improving performance.
Importantly, the change allows exporters and renderers to use UVs
"touched" by geometry nodes, which only creates generic attributes.
It also allows geometry nodes to create "proper" UV maps from scratch,
though only with the Store Named Attribute node for now.
The new design considers any 2D vector attribute on the corner domain
to be a UV map. In the future, they might be distinguished from regular
2D vectors with attribute metadata, which may be helpful because they
are often interpolated differently.
Most of the code changes deal with passing around UV BMesh custom data
offsets and tracking the boolean "sublayers". The boolean layers are
use the following prefixes for attribute names: vert selection: `.vs.`,
edge selection: `.es.`, pinning: `.pn.`. Currently these are short to
avoid using up the maximum length of attribute names. To accommodate
for these 4 extra characters, the name length limit is enlarged to 68
bytes, while the maximum user settable name length is still 64 bytes.
Unfortunately Python/RNA API access to the UV flag data becomes slower.
Accessing the boolean layers directly is be better for performance in
general.
Like the other mesh SoA refactors, backward and forward compatibility
aren't affected, and won't be changed until 4.0. We pay for that by
making mesh reading and writing more expensive with conversions.
Resolves T85962
Differential Revision: https://developer.blender.org/D14365
**Changes**
As described in T93602, this patch removes all use of the `MVert`
struct, replacing it with a generic named attribute with the name
`"position"`, consistent with other geometry types.
Variable names have been changed from `verts` to `positions`, to align
with the attribute name and the more generic design (positions are not
vertices, they are just an attribute stored on the point domain).
This change is made possible by previous commits that moved all other
data out of `MVert` to runtime data or other generic attributes. What
remains is mostly a simple type change. Though, the type still shows up
859 times, so the patch is quite large.
One compromise is that now `CD_MASK_BAREMESH` now contains
`CD_PROP_FLOAT3`. With the general move towards generic attributes
over custom data types, we are removing use of these type masks anyway.
**Benefits**
The most obvious benefit is reduced memory usage and the benefits
that brings in memory-bound situations. `float3` is only 3 bytes, in
comparison to `MVert` which was 4. When there are millions of vertices
this starts to matter more.
The other benefits come from using a more generic type. Instead of
writing algorithms specifically for `MVert`, code can just use arrays
of vectors. This will allow eliminating many temporary arrays or
wrappers used to extract positions.
Many possible improvements aren't implemented in this patch, though
I did switch simplify or remove the process of creating temporary
position arrays in a few places.
The design clarity that "positions are just another attribute" brings
allows removing explicit copying of vertices in some procedural
operations-- they are just processed like most other attributes.
**Performance**
This touches so many areas that it's hard to benchmark exhaustively,
but I observed some areas as examples.
* The mesh line node with 4 million count was 1.5x (8ms to 12ms) faster.
* The Spring splash screen went from ~4.3 to ~4.5 fps.
* The subdivision surface modifier/node was slightly faster
RNA access through Python may be slightly slower, since now we need
a name lookup instead of just a custom data type lookup for each index.
**Future Improvements**
* Remove uses of "vert_coords" functions:
* `BKE_mesh_vert_coords_alloc`
* `BKE_mesh_vert_coords_get`
* `BKE_mesh_vert_coords_apply{_with_mat4}`
* Remove more hidden copying of positions
* General simplification now possible in many areas
* Convert more code to C++ to use `float3` instead of `float[3]`
* Currently `reinterpret_cast` is used for those C-API functions
Differential Revision: https://developer.blender.org/D15982
This patch moves the realtime compositor out of experimental. See
T99210.
The first milestone is finished with regards to implementing most
essential nodes for single pass compositing. It is also now documented
in the manual and no major issues are known.
Differential Revision: https://developer.blender.org/D16891
Reviewed By: Clement Foucault
The "While Held" option from the Pose Propagate Operator
doesn't do anything meaningful.
After talking with the Animation Module it was decided to remove it.
In code it was called `POSE_PROPAGATE_SMART_HOLDS`
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D16771
Ref: D16771
Added a new operator that aligns selected keys on an exponential curve
Revied by Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9479
Ref: D9479
When pasting nodes with the shortcut or the context menu, place the
center of the selected nodes at the same position as the mouse cursor.
This should save time, and is more intuitive because the new nodes are
actually visible.
Based on a patch by Juanfran Matheu (@jfmatheu).
Differential Revision: https://developer.blender.org/D10787
There are two underlying issues which got uncovered by the report:
First, is that the poll() function for the operator was using legacy
API which is on its way of removal in the next major version release.
This part is fixed in this patch based on a patch provided by Philipp
Oeser (P3389) with the modification that the `clip` is not accessed
prior to None check. Ended up in a bit annoying one-liner, the entire
function could be refactored to use early returns.
The second issue is that the Python access to the legacy property
was wrong: need to access camera reconstruction instead of accessing
deprecated DNA field.
It's confusing for users when the Dopesheet's Editor Buttons for Grease Pencil are greyed out.
{F14099985}
[[ https://blenderartists.org/t/cant-create-new-layers-in-grease-pencil-dopesheet/1353882 | Can’t create new layers in grease pencil dopesheet ]]
This is often because the 'Only Show Selected' filter is disabled. This 'requirement' does not seem to be necessary since the Dopesheet is already in Grease Pencil mode and there is an active Grease Pencil Object. It is also not apparent as to why so many Operators depend on it and unintuitive that it controls their function. The 'Only Show Selected' filter button is far away from the Operator buttons in the User Interface Header, so it's difficult to make the association.
If the 'Only Show Selected' IS absolutely required, I believe it should be closer to the DOPESHEET_HT_editor_buttons. Otherwise, I think the requirement should be removed.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D16885
