Add an `object.modifiers.move()` method, similar to the one
for constraints and some other collections. Currently reordering
modifiers requires using operators, which depend on context.
The implementation is straightforward, except for the need to
make the severity of errors reported by the underlying editor
code into a parameter, so that the new Python API function
reports any problems as Python exceptions, and refactoring
the code to allow aborting a blocked move before making any
changes. I also turn the negative index condition from an assert
into an error.
Differential Revision: https://developer.blender.org/D16966
The list was populated from the base (unevaluated) object, but now that
Geometry nodes can generate various layers this is impractical..
Differential Revision: https://developer.blender.org/D17093
The clear functions for grease pencil data/frame/layer
was not followed by immediate update in the viewport.
Some notifiers were missing in the rna definition of these functions,
which are added in by this patch.
Reviewed By: Antonio Vazquez
Differential Revision: https://developer.blender.org/D17120
Only one point should be used to create a reference rotation for other
points to follow. Using two caused the resulting twist to be
asymmetric, especially noticeable on symmetrical, cyclic curves.
An update to [0] which broke curve_to_mesh & deform_modifiers tests,
now this change only applies to cyclic curves as the final result was
much greater for non-cyclic curves because of a difference between how
end-point directions are calculated (see code-comments for details).
Alternate fix to D11886 which caused T101843.
[0]: 36a82314a0.
Regression in [0] which cleared the redo-panel if an operator added
its own undo step. This worked for sculpt to fix T101743, but caused
the redo-panel to be cleared for actions who's undo steps where created
by nested operators (which is the case for the spin operator).
Fix by checking an undo-step is added without registering an operator.
[0]: f68e50a263
Various new CI tests for USD Import / Export functionalty:
Import:
- Added mesh import tests for topology types and multiple UV sets. (Python)
Export:
- Added a verification tests for mesh topology. (C++)
- Added a test to make sure UsdPreviewSurface export conversion of materials
is correct. (C++)
Reviewed by: Sybren and Hans.
Differential Revision: https://developer.blender.org/D16274
This reverts commit 36a82314a0.
as it has broken tests for the last day and a half, it likely just
needs a test file update, but we can't keep this failing longer
than it already has.
A mistake in the node type descriptions gave the node a description for
the reverse curve node.
Differential Revision: https://developer.blender.org/D17111
Added a new Import All Materials USD import option. When this
option is enabled, USD materials not used by any geometry will
be included in the import. Imported materials with no users
will have a fake user assigned.
Maniphest Tasks: T97195
Differential Revision: https://developer.blender.org/D16172
We should always have an active vertexgroup (making sure this is the
case was just not happening on the greasepencil side).
Now do this (similar to what is done for other object types in
`object_defgroup_remove_common`).
Maniphest Tasks: T104089
Differential Revision: https://developer.blender.org/D17091
User site-packages were disabled unless `--python-use-system-env`
argument was given. This was done to prevent Blender's Python
unintentionally using modules that happened to be installed locally,
however it meant so pip installing modules from Blender would fail to
load those modules (for some users).
Enable user site-packages since it's needed for installing additional
packages via pip, see code-comments for details.
Resolves T104000.
- Don't call exit() when memory allocation fails, while unlikely
internal failures should not be exiting the application.
- Don't print a message when the directory is empty as it's
unnecessarily noisy.
- Print errors the the stderr & include the reason for opendir failing.
When constructing run-time paths native slashes are preferred as WIN32
doesn't have full support for forward slashes in paths.
It can also cause problems when performing exact matches on paths
which are normalized, where normalizing one of the paths makes
comparisons fail.
Using the system native slash would have avoided T103385.
Originally, function `sequencer_generic_invoke_xy_guess_channel`
looked in what channel the last strip of the same type is and the
channel used for new strip placement. This was changed as a workaround
when sound strips were added below movie strips
(58bea005c5).
Now these workarounds aren't necessary, but the function was left
unchanged.
Current logic is for adding movie strip to channel 1 is:
- Sound is added to channel 1
- Video is added to channel 2
- If there is only video, it is added to channel 1
Since movie may, or may not contain sound, it is not possible to align
added strips in a way that was done before, unless timeline is analyzed
more in detail, but this would be quite inefficient.
Also, note, that the code did not work, if strip is added next to
previous one, so it mostly did not work as intended.
This commit changes:
- Fix alignment not working when strip is added right next to previous
strip
- Assume that movie strips have sound strip underneath it, so channel
below last movie strip is picked
- For other strip types, pick channel of the last strip of same type
Ultimately, the code is still rather weak, and better system, like using
channel where strip was manually moved, or concept of "typed channels"
would improve this feature.
There is not much documentation on the "snap_point" property, but by
code it is possible to note that it serves to set a target snap point
and is of internal use as it is hidden from the Redo panel.
However, this property was still very dependent on Tools settings and
if set to an operator's call, it changes the scene configurations
inadequately.
Therefore,
- remove this dependency from UI for rotation and resize operators,
- do not change the state of the snap in the scene and
- cleanup the code.
Some transform modes are changeable, so callbacks should be reset
together.
Currently the unchanged `transform_matrix` callback is not a major
issue as it is only used for gizmos and gizmos stop updating when
changing the operator type.
Use a Vector<std::string> , instead of a Set<std::string> as a Set does
not keep the same order when iterating over it.
Differential Revision: https://developer.blender.org/D17103
In many cases when reading undo memfile, n the 'restore id from old
main' part of the process, the 'id_old' is not set, which means that
the call to `BKE_main_idmap_insert_id` would try to dereference a `nullptr`.
In practice this is likely not an issue (see comment in code for details),
but at least explicitely check for a nullptr `id_old` pointer.
Would deffer actual cleanup of this area for after 3.5 is branched out.
Currently only affects 'UI' IDs (WindowManager, Screen, etc.), but in
the future other types may be affected as well.
NOTE: this is only used in readfile code itself, not in the
post-processing performed by `setup_app_data`, as this code is too
specific for such generic handling.
Simon mentioned that this gets in the way more than it helps. No geometry
sockets currently show up in the modifier panel. People may build node groups
that have multiple geometry inputs that can be used when the group is used
as node instead of as modifier.
In the future we could also allow e.g. choosing an object to pass into a geometry
socket. That has the problem that we'd also have to duplicate other functionality
of the Object Info node (original vs. relative space).
There were two issues:
* The `new_point_counts_per_curve` was one too large, resulting in
`interpolate_from_neighbors` reading invalid memory.
* Writing the counts into the existing offsets array didn't quite work
because there can be a collision at the offset right between the
last old curve and the first new point. There was a race condition
where this value could be read and written at the same time.
When some path property was displayed in the File Browser, clicking the
icon to open a file browser dialog to choose a file/directory would
show an error. While this makes sense when you are already in a file
browser dialog (we don't support such nested file browser dialogs),
allow it when the file browser is opened as a normal editor, not as a
dialog.
Current implementation had some faulty assumtions and had some work
arounds for crashes that were actually limitation of the implementation.
The main reason for this was that the implementation didn't add new
primitives in the same direction it was already adding. Some when
incorrect behavior was detected it was assumed that the part wasn't
manifold (anymore) and didn't fix that part of the mesh.
The new implementation will extract a solution and use this solution
also as the order to generate primitives in uv space.
This patch fixes several crashes and improves the overall quality
when fixing seam bleeding. It also adds additional debug tools
(print_debug) implementation in order to find issues faster in the
future.
Regression in [0] caused by a change where path joining would
replace a forward slash with a back-slash when joining paths WIN32.
Now the directory is always used as a prefix for the paths returned
by BLI_filelist_dir_contents which resolves the regression.
[0]: 9f6a045e23
`remember_deformed_curve_positions_if_necessary` has to be called before
topology changing operations on curves. Otherwise the crazy-space data
is invalid.
Alexander Gavrilov
Jacques Lucke
Martijn Versteegh
Amélie Fondevilla
Campbell Barton
Miguel Pozo
Michael Kowalski
Hans Goudey
Ray molenkamp
Sibo Van Gool
Philipp Oeser
Bastien Montagne
Richard Antalik
Germano Cavalcante
Joseph Eagar
Lukas Stockner
Antonio Vazquez
Julian Eisel
Jeroen Bakker