This node is similar to the mask modifier, but it deletes the elements
of the geometry corresponding to the selection, which is retrieved as
a boolean attribute. The node currently supports both mesh and point
cloud data. For meshes, which elements are deleted depends on the
domain of the input selection attribute, just like how behavior depends
on the selection mode in mesh edit mode.
In the future this node will support curve data, and ideally volume
data in some way.
Differential Revision: https://developer.blender.org/D10748
This patch adds the base code needed to make the full-frame system work for both current tiled/per-pixel implementation of operations and full-frame.
Two execution models:
- Tiled: Current implementation. Renders execution groups in tiles from outputs to input. Not all operations are buffered. Runs the tiled/per-pixel implementation.
- FullFrame: All operations are buffered. Fully renders operations from inputs to outputs. Runs full-frame implementation of operations if available otherwise the current tiled/per-pixel. Creates output buffers on first read and free them as soon as all its readers have finished, reducing peak memory usage of complex/long trees. Operations are multi-threaded but do not run in parallel as Tiled (will be done in another patch).
This should allow us to convert operations to full-frame in small steps with the system already working and solve the problem of high memory usage.
FullFrame breaking changes respect Tiled system, mainly:
- Translate, Rotate, Scale, and Transform take effect immediately instead of next buffered operation.
- Any sampling is always done over inputs instead of last buffered operation.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11113
Now FPS is displayed in the video source for videos to provide easy
access.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11441
The same code existed in 2.82 and earlier so this should be safe. Removing the
custom implementation of shutil.copytree in f34d5d9 did not correctly add back
the option to copy symlinks.
This node creates poly curve splines from mesh edges. A selection
attribute input allows only using some of the edges from the mesh.
The node builds cyclic splines from branchless groups of edges where
possible, but when there is a three-way intersection, the spline stops.
The node also transfers all attributes from the mesh to the resulting
control points. In the future we could add a way to limit that to a
subset of the attributes to improve performance.
The algorithm is from Animation Nodes, written by @OmarSquircleArt.
I added the ability to use a selection, attribute transferring, and
used different variable names, etc, but other than that the algorithm
is the same.
Differential Revision: https://developer.blender.org/D11265
Added missing topbar in VSE.
Also added the Stabilizer options to Topbar for all modes.
Reviewed By: mendio, pepeland
Maniphest Tasks: T86465
Differential Revision: https://developer.blender.org/D11347
This patch adds an option in the Layers > Relations panel called "Disable Masks in Render".
When checked, no masks on this layer are included in the render.
Example:
| {F10087680} | {F10087681} |
See T88202 for why this is needed.
Reviewed By: antoniov
Maniphest Tasks: T88202
Differential Revision: https://developer.blender.org/D11234
This operator is a common request of animators to convert the transformation (inluding modifiers) of one grease pencil object, into a new object, generating strokes.
Reviewed By: pepeland
Maniphest Tasks: T87424
Differential Revision: https://developer.blender.org/D11014
Accessing data through RNA should never implicitely create it. Objects'
and particles' forcefields and collision settings were doing this.
Note that UI code also had to be tweaked to properly handle `None`
(NULL) cases.
Differential Revision: https://developer.blender.org/D11341
This node can change all faces that use a specific material to use a
different material. Using this node is significantly more efficient
than creating a selection from all faces with a specific material
index and then using the Material Assign node.
Ref T88055.
Differential Revision: https://developer.blender.org/D11325
Previously, the "follow path constraint" and "follow parented curve"
were clamped. This restriction was lifted in rBcf2baa585cc8
Add back an option to get the old behavior in the "Path animation" settings.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D11263
Since version 2.80, the annotations of the Scene strip were not displayed in VSE. Also, the UI panel was`Grease Pencil` and must be `Annotation`
The problem was the offscreen render hasn't evil_CTX and the section of the annotation was never called.
Differential Revision: https://developer.blender.org/D11329
This node is similar to the Value and Vector node.
It just provides a way to use the same material in multiple nodes
without exposing it outside of a node group.
Differential Revision: https://developer.blender.org/D11305
This adds a new Material Assign node. It can be used to change the
material used by an existing mesh or to assign a material to a mesh
that has been generated from scratch.
Differential Revision: https://developer.blender.org/D11155
- Used try/except instead of a poll function.
- The error case referenced a non-existent error handling module.
Prefer poll functions over exception handling where possible,
also having an operators logic in a try block isn't good practice
as it can hide more serious errors in the code.
Note that duplicate pencil settings access should be moved into a
utility function. This can be part of a separate cleanup.
Now the operators work like other areas of Blender using the list of selected objects.
Also, the name has been changed to:
```Layers:
- Copy Layer to Selected
- Copy All Layers to Selected
Materials:
- Copy Material to Selected
- Copy All Materials to Selected```
Reviewed By: mendio, pablovazquez, pepeland
Differential Revision: https://developer.blender.org/D11216
'Preferences' is the term used elsewhere in Blender so this commit makes
the option more consistent.
In the future, the "default" target could be changed to something more
descriptive.
Add translation/rotation/scale parameters for custom bones shapes. The
new scale is a 3D vector `custom_shape_scale_xyz`, and replaces the
`custom_shape_scale` float.
Reviewed By: #animation_rigging, sybren, zeddb
Differential Revision: https://developer.blender.org/D10974
The Cycle-Aware Keying option was added in 2.8 and is used
to allow keyframing over cyclic F-Curves without disturbing
the cycle (e.g. overwriting an end keyframe updates both ends).
This effect is not limited to auto keyframing and is applied
to any key insertion, but when the popovers were rearranged
it was put in the Auto-Keyframing related one for some reason.
This is misleading, especially since because of that the
option is incorrectly greyed out when auto keyframing is
disabled, so move it to the generic Keyframing popover.
Differential Revision: https://developer.blender.org/D11213
This node generates a naturally parametarized (even length edge) poly
spline version of every spline in the input. There are two modes,
"Count", and "Length". These are similar to the same options for the
line primitive node in end points mode.
I implemented this instead of a "Sample Points" node, because for this
operation it's trivial to keep the result as a curve, which is nice
since it increases flexibility, and because it can make instancing
simpler, i.e. using the transforms of each evaluated point rather than
requiring the construction of a "rotation" attribute.
Differential Revision: https://developer.blender.org/D11173
Now it's possible to append materials of one grease pencil object into another one. The operator allows active material or all materials.
Also, the Layer Copy To Object has been renamed to Layer Append to Object to keep consistency and now allows to append all layers at once.
This node has the same functionality as the color and vector curve
mapping nodes in the shader editor. Here is works on every value for
the selected attribute, and it can also output a float value. Other
than that, the implementation is quite straightforward-- almost
completely boilerplate code.
Differential Revision: https://developer.blender.org/D10921
This option should always be available. Even if it does not affect the
current object depending on its mode, it affects the rest of the geometry
of the scene.
The rest of the options also work this way. For example, a grease pencil
object does not have face orientation, but the ovelay option is still
there for the rest of the scene.
Reviewed By: JulienKaspar, HooglyBoogly
Maniphest Tasks: T83398
Differential Revision: https://developer.blender.org/D10215
Partial fix for T81751 which exposes multiple playback performance
issues. Previously the cache was limited to 30 frames, without a way to
increase the cache for smooth playback with files that are slow to load.
Now the animation plays back smoothly once loaded into cache.
The cache limit from the system preference is used
when the player is launched from Blender.
A new player argument `-c <cache_limit>` was added to support this.
Internally, when using Fill brush a dilate of the filled area was done, but this was hardcoded to 1 pixel.
In some situations, this was not enough, so now the value is accesible in the UI and can be set with different values.
Also, as this value is more used than `Leak Size`, the new Dilate is on Topbar, and Leak Size has been moved to Advanced panel.
All changes:
* Include `file.pack_libraries` and `file.unpack_libraries` to the menu
[1].
* Rename "Pack Blender Libraries" → "Pack Linked Libraries" [2].
* Rename "Unpack Blender Libraries" → "Unpack Linked Libraries" [2].
* Rename "Pack All Into .blend" → "Pack Resources" [3]
* Rename "Unpack All Into Files" → "Unpack Resources" [3]
* Rename "☑ Automatically Pack Into .blend" → "☑ Automatically Pack
Resources" [3]
* Rename "Make All Paths Relative" → "Make Paths Relative" [4]
* Rename "Make All Paths Absolute" → "Make Paths Absolute" [4]
* Add separators accordingly
---
[1] - This was never exposed since its original commit rB16411da41e40.
Now that operator not listed in menus don't
show up in the search, this became even more hidden.
[2] - The original name (Pack Blender Library) was not clear enough.
Pose Libraries and Asset Libraries are also technically Blender
libraries.
[3] - The term All was misleading since it didn't include the Linked
Libraries.
[4] - No need to use "All". It is not used in the Report/Find Missing
Files either.
This commit put this in the File > External Data menu.
Differential Revision: https://developer.blender.org/D11109
This patch adds initial curve support to geometry nodes. Currently
there is only one node available, the "Curve to Mesh" node, T87428.
However, the aim of the changes here is larger than just supporting
curve data in nodes-- it also uses the opportunity to add better spline
data structures, intended to replace the existing curve evaluation code.
The curve code in Blender is quite old, and it's generally regarded as
some of the messiest, hardest-to-understand code as well. The classes
in `BKE_spline.hh` aim to be faster, more extensible, and much more
easily understandable. Further explanation can be found in comments in
that file.
Initial builtin spline attributes are supported-- reading and writing
from the `cyclic` and `resolution` attributes works with any of the
attribute nodes. Also, only Z-up normal calculation is implemented
at the moment, and tilts do not apply yet.
**Limitations**
- For now, you must bring curves into the node tree with an "Object
Info" node. Changes to the curve modifier stack will come later.
- Converting to a mesh is necessary to visualize the curve data.
Further progress can be tracked in: T87245
Higher level design document: https://wiki.blender.org/wiki/Modules/Physics_Nodes/Projects/EverythingNodes/CurveNodes
Differential Revision: https://developer.blender.org/D11091
Reported for ops.transform.vertex_warp and ops.transform.vertex_random.
Polling will check with ED_transverts_check_obedit, if we know it will
fail e.g. for pose mode, we can do the same check in the UI already.
Maniphest Tasks: T87926
Differential Revision: https://developer.blender.org/D11128
These settings are used though for these strokes (see
'paint_stroke_use_dash'), should be visible in the UI as well.
This was correctly added when dashing was introduced in rB15f82278d5d4
btw., but then messed up in rBfb74dcc5d69d.
Maniphest Tasks: T87816
Differential Revision: https://developer.blender.org/D11096
