Since these values defaulted to zero, a NULL default array will do, but for new operators that need to be initialized from an array, only static arrays should be used.
Paint mode (VPaint WPaint) was too easy to enter, I made the
operators having a more designated poll() to check stuff.
Now CTRL+TAB hotkeys will work in editmode for select type,
and outside editmode for wpaint or posemode.
Also fixed select type operator to so it works for facemode.
Moved 'redo last operator' stuff to WM level, with a
WM_operator_repeat()
Code in screen_ops was not checking all operator stuff
correctly, so repeat menu (F3 now) crashed in cases.
Rather then having a hard coded popup menu with events that call other operators exec functions, operator names are given to the toolbox where it displays the operator name and shortcut.
This means the real operator is registered rather then the one that called it.
Im not sure about the location for the operator though, at the moment its called VIEW3D_OT_editmesh_face_toolbox() in view3d_header.c since the image editor toolbox is in the header file too.
In a way it makes sense because this menu should eventually be in the header.
- Change shortcut to Ctrl+F as it is in 2.4x
- Added a number of operators that were not being registered - MESH_OT_fill_mesh, beauty_fill, convert_quads_to_tris, convert_tris_to_quads, edge_flip, mesh_set_smooth_faces, mesh_set_solid_faces
- Renamed redundant MESH_OT_mesh_set_smooth_faces() to MESH_OT_faces_shade_smooth(), same for solid.
- Renamed MESH_OT_mesh_selection_mode_menu to MESH_OT_mesh_selection_type since the operator doesnt have to be accessed from a menu.
Shaul, you might want to look over this, using enums means WM_menu_invoke can be used instead of writing an invoke function for each operator.
Added error messages to WM_menu_invoke if no enum "type" property is found.
Big commit, but mainly adminstration.
- Enabled ot->flag OPTYPE_UNDO to work.
- Removed all redundant ED_undo_pushes, but I'd
recommend everyone to check it while testing. :)
- Added view manipulations as OPTYPE_REGISTER,
although this will flood the redo stack a bit...
Nevertheless; for a "redo last action" panel we
can simply check if both flags are set for redo.
- Bugfix in editmode undo: selectmode was cleared,
so you couldn't select after undo
- Bugfix in mixing tweaks and keymaps... solution
works but is weak, need to think over a while.
Edit Mesh
Added the two other 'select similar' ops, for edge and face.
For testing fun I've put these ones as first keys using the
modifier order feature. So it's now:
SHIFT+G : similar vertex
CTRL+SHIFT+G: similar edge
SHIFT+CTRL+G: similar face
Not very useful here; but I think this can work well to map
a double amount of options under mouseclicks. Power user
config stuff!
Edit Mesh
- "Select Similar" for vertices back.
(Put under Jkey for now)
- renamed operator righthand_faces to consistant_normals
gave it boolean property for 'inside'.
Fake commit, but for history I have to write the log!
Fixed CTRL+Q quit-blender. It was using ancient code
still, and since I always use APPLE+Q I never noticed :)
Edit Mesh:
- Added back "Edge Shortest Path select"
It now also does regular selection, more fun!
It's mapped to CTRL+click now, and makes or clears selections
between current and previously activated edge.
Seam/Sharp/etc marking is a toolsetting mode still. These
options cannot become properties easily, because the tool
uses the properties of selected edge to clear...
- Removed a whole bunch of G.f flags, related to mesh drawing.
It's all now local in me->drawflags. Here's the list of
removed old globals:
G_DRAWEDGES
G_DRAWFACES
G_DRAWNORMALS
G_DRAW_VNORMALS
G_ALLEDGES
G_HIDDENEDGES
G_DRAWCREASES
G_DRAWSEAMS
G_DRAWSHARP
G_DRAWBWEIGHTS
G_DRAW_EDGELEN
G_DRAW_FACEAREA
G_DRAW_EDGEANG
Edit mesh:
- fixed compile, shul only committed the function declaration, not
the code for 'make fgon'.
- Put the Fgon option under:
ALT+F: make fgon
SHIFT+ALT+F: clear fgon
(note, SHIFT+F = fill :)
- Fixed loop select to use two booleans, as Martin pointed me
correctly at! Using 1 variable was lazy coding.
- Edit mesh: Add ctrl+click add vertex or extrude.
I've made it not move the 3d cursor in that case.
Also found out tweak events conflicted with existing
keymap definitions; on tweak failure (= no mousemove)
it now passes on the mouse event as 'mouse down' for
the remaining keymaps to check.
These then actually respond to mouse-up instead of down...
The location in the keymaps where tweaks get generated
remains important. Examples:
1 - 'select' mouse-handler, operator return pass-through
2 - tweak handler checks, and makes tweak event
3 - grabber responds to tweak event
1 - ctrl+mouse tweak handler checks, makes tweak event,
or passes event on
2 - if tweak event, it runs lasso
3 - else when passed on, ctrl+click extrude happens
In the first case, select works on mouse-down, immediate.
In the second case, extrude happens on mouse-release, even
though the keymap defined mouse-press.
This will make designing nice balanced keymaps still not
simple; especially because you can't tell operators to
pass on the key... although we can add the convention that
select-mouse operators always pass on to enable tweaks.
Still a good reason to wait with custom keymaps
when this is fully settled!
use of function pointers in the context callbacks. Apparently
MSVC decides that some of these functions are the same and
makes them into a single function with the same address. I
couldn't figure out if this was a compiler bug or according
to the C spec. Regardless, that means this method can't be
used, so now it uses separate CTX_DATA_DEFINES.
Animsys: added integrated copy of animdata in copy_libblock().
-> by default animdata-copy should relink ID data like Action,
and put a facility to really duplicate it in other code.
(single_user_animdata or so)
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
* Note to Icon Designers - we need a new icon for 'Animation data' I think. Currently I'm using the old IPO icon...
* Should F-Curves get shown in the Outliner?
* Drivers view in Graph Editor now displays drivers only, instead of displaying normal Animation data.
* 'Materials' channel is now only shown under an Object when there are Materials with animation data...
* Hid more debug prints behind debug flag. These should be removed...
- Made WM_cursor_wait() work without context or pointers,
like old waitcursor(). Only use when operations entirely
block UI. It will set waitcursor for all open windows.
- Cleanup in mesh tools, removing old cruft, and prepare
for more goodies for shul to work on!
Only object layers have been done for now. The implementation of this should provide a good indicator for how this should be done. Unforunately, the code for animating layer visibility is not that straightforward, since scene->base->layer (not set) settings need to be synchronised with the object->layer (set by Animato) settings.
Note to bdiego: this module seems to depend on ftfont, which is only compiled with the INTERNATIONAL build setting, however it seems blenfont should work regardless of that setting.
I go to start commit the new code here and then replace one
by one bmfont and ftfont, this do nothing right now, but it's
more easy keep the files here to work from the studio and my home.
I only update the Makefile and SConscript (but JesterKing a double
check never is bad), so please check the msvc and cmake files.
The new library is libblenfont.a
* Means that full object recalc isn't done, so multires works more as expected now
* Moved mesh element cache back to sculpt session (from sculpt cache), really makes more sense there
* Recoded the conversion code so that all data gets converted. Previously, some IPO's and Actions (notably the ones used for Action Constraints) were not ported across.
* Made F-Curve drawing use more saturated colours to make them more visible. I'm not sure whether this works well in practice.
* Restored some horizontal bounding-box checks to optimise drawing.
* Automatic shortcut keys in menus now compare operator properties as well.
Implemented IDP_EqualsProperties for this.
* I imagine all these compares may be a bit slow, for this case it's not
so bad though because it only happens for one menu when it is opened.
