Instead of storing a single active view-layer in the workspace, one is
stored for each scene the workspace showed before.
With this, some things become possible:
* Multiple windows in the same workspace but showing different scenes.
* Toggling back and forth scene keeps same active view-layer for each scene.
* Activating workspace which didn't show current scene before, the current view-layer is kept.
A necessary evil for this is that accessing view-layer and object mode
from .py can't be done via workspace directly anymore. It has to be done
through the window, so RNA can use the correct scene.
So instead of `workspace.view_layer`, it's `window.view_layer` now (same
with mode) even though it's still workspace data.
Fixes T53432.
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
This patch moves all the functionality previously in SceneRenderLayer to SceneLayer.
If we want to rename some of these structs now would be a good time to do it, before they are in SceneLayer.
Everything should be working, though I will test things further tomorrow. Once this is committed depsgraph can get
rid of the workaround added in rna_Main_meshes_new_from_object and finish whatever this patch was preventing from being finished.
This patch also adds a few placeholders for the overrides (samples, ...). These are obviously not working, so some unittests that rely on 'lay', and 'zmask' will fail.
This patch does not addressed the change of moving samples to ViewRender (I have this as a separate patch and needs some separate discussion).
Following next is the individual note of the individual parts that were committed.
Note 1: It is up to Cycles to still get rid of exclude_layer internally.
Note 2: Cycles still need to handle its own doversion for the use_layer_samples cases and
(1) Remove the override as it is
(2) Add a new override (scene.cycles.samples) if scene.cycles.use_layer_samples != IGNORE
Respecting the expected behaviour when scene.cycles.use_layer_samples == BOUNDED.
Note 3: Cycles still need to implement the per-object holdout
(similar to how we do shadow catcher).
Note 4: There are parts of the old (Blender Internal) rendering pipeline that is still
using lay, e.g., in shi->lay.
Honestly it will be easier to purge the entire Blender Internal code away instead of taking things from it bit by bit.
Reviewers: sergey, campbellbarton, brecht
Differential Revision: https://developer.blender.org/D2919
Note: Cycles still need to handle its own doversion for theses cases and
(1) Remove the override as it is
(2) Add a new override (scene.cycles.samples) if scene.cycles.use_layer_samples != IGNORE
Respecting the expected behaviour when scene.cycles.use_layer_samples == BOUNDED.
While getting rid of Scene->base we got the following fixes:
* Fix "Convert To" operator
* Fix "NLA allowing to selected objects that are not selectable
* Fix scene.objects (readonly, no option to link/unlink)
Note: Collada needs to use the context SceneLayer for adding objects
however I added a placeholder, so Collada maintainers can fix this
properly.
We now initialize iter.valid as true as part of the main iterator (and manually
when using via Python). And we don't even bother setting iter->current to NULL
if it's invalid. Let's stick to using iter->valid only.
If an object is in any visible collection, the object will be visible.
This behaviour has changed in 9ad2c0b615.
If it will change again, it will be for:
https://developer.blender.org/D2878
This is a corner-case, but one that is too easy to reproduce:
* Unlink all the collections of active view layer.
* Link a group without "Instancing" it.
Engine is not stored in WorkSpaces. That defines the "context" engine, which
is used for the entire UI.
The engine used for the poll of nodes (add node menu, new nodes when "Use Nodes")
is obtained from context.
Introduce a ViewRender struct for viewport settings that are defined for
workspaces and scene. This struct will be populated with the hand-picked
settings that can be defined per workspace as per the 2.8 design.
* use_scene_settings
* properties editor: workshop + organize context path
Use Scene Settings
==================
For viewport drawing, Workspaces have an option to use the Scene render
settings (F12) instead of the viewport settings.
This way users can quickly preview the final render settings, engine and
View Layer. This will affect all the editors in that workspace, and it will be
clearly indicated in the top-bar.
Properties Editor: Add Workspace and organize context path
==========================================================
We now have the properties of:
Scene, Scene > Layer, Scene > World, Workspace
[Scene | Workspace] > Render Layer > Object
[Scene | Workspace] > Render Layer > Object > Data
(...)
Reviewers: Campbell Barton, Julian Eisel
Differential Revision: https://developer.blender.org/D2842
Iterate over invisible objects too, so lamps can still lit the scene.
Also, now you can use a collection to set an object to invisible, not
only to visible.
For example:
Scene > Master collection > bedroom > furniture
Scene > View Layer > bedroom (visible)
> furniture (invisible)
The View Layer has two linked collections, bedroom and furniture.
This setup will make the furniture collection invisible.
Note: Unlike what was suggested on D2849, this does not make collection
visibility influence camera visibility. I will keep this as a separate
patch.
Reviewers: sergey
Subscribers: sergey, brecht, fclem
Differential Revision: https://developer.blender.org/D2849
Right now this is exposed in the outliner, though all this
(visible/selectable/enable) should be moved to a new panel soon.
This removes objects from the depsgraph when the collection is disabled.
It allows you to "hide" lamps but still having them lighting the scene.
Same for light probes and other support objects.
Pending tasks:
* Have depsgraph to include invisible objects in the DEG_OBJECTS_ITER, and
then have Eevee and other engines to make a distinction between an
invisible and a visible object.
(for example, we probably want invisible objects to not show in the
viewport, but cast shadows and show up in light probes).
* Change how we evaluate collection settings so that an invisible
collection can force an object to be invisible.
Reviewers: campbellbarton
Subscribers: sergey
Differential Revision: https://developer.blender.org/D2848
2.8x branch added bContext arg in many places,
pass eval-context instead since its not simple to reason about what
what nested functions do when they can access and change almost anything.
Also use const to prevent unexpected modifications.
This fixes crash loading files with shadows,
since off-screen buffers use a NULL context for rendering.
This commit effectively makes workspace switching useless as far as the
active scene layer goes.
The functions from the scene layer API to get the correct scene layer
from "context" were a placeholder to be addressed by the workspace
commit.
When workspace was merged, however G.main was used as a replacement to pass the
correct argument for the functions. As it turned out (surprise!) this
leads to crash on render preview.
We need to get rid of:
* BKE_scene_layer_context_active_ex_PLACEHOLDER
* BKE_scene_layer_context_active_PLACEHOLDER
And either use SceneLayer explicitly or replace it by:
* BKE_scene_layer_from_workspace_get
There is no reason to be special for workspace and go against other design
decision in Blender. If something like this is going to become a common
practice in Blender it should be well thought and well tested, including
tests of all supported compilers and configurations.
This feature was relying on type re-definition, which is not only confusing
but also available in C11 only.
This commit does the main integration of workspaces, which is a design we agreed on during the 2.8 UI workshop (see https://wiki.blender.org/index.php/Dev:2.8/UI/Workshop_Writeup)
Workspaces should generally be stable, I'm not aware of any remaining bugs (or I've forgotten them :) ). If you find any, let me know!
(Exception: mode switching button might get out of sync with actual mode in some cases, would consider that a limitation/ToDo. Needs to be resolved at some point.)
== Main Changes/Features
* Introduces the new Workspaces as data-blocks.
* Allow storing a number of custom workspaces as part of the user configuration. Needs further work to allow adding and deleting individual workspaces.
* Bundle a default workspace configuration with Blender (current screen-layouts converted to workspaces).
* Pressing button to add a workspace spawns a menu to select between "Duplicate Current" and the workspaces from the user configuration. If no workspaces are stored in the user configuration, the default workspaces are listed instead.
* Store screen-layouts (`bScreen`) per workspace.
* Store an active screen-layout per workspace. Changing the workspace will enable this layout.
* Store active mode in workspace. Changing the workspace will also enter the mode of the new workspace. (Note that we still store the active mode in the object, moving this completely to workspaces is a separate project.)
* Store an active render layer per workspace.
* Moved mode switch from 3D View header to Info Editor header.
* Store active scene in window (not directly workspace related, but overlaps quite a bit).
* Removed 'Use Global Scene' User Preference option.
* Compatibility with old files - a new workspace is created for every screen-layout of old files. Old Blender versions should be able to read files saved with workspace support as well.
* Default .blend only contains one workspace ("General").
* Support appending workspaces.
Opening files without UI and commandline rendering should work fine.
Note that the UI is temporary! We plan to introduce a new global topbar
that contains the workspace options and tabs for switching workspaces.
== Technical Notes
* Workspaces are data-blocks.
* Adding and removing `bScreen`s should be done through `ED_workspace_layout` API now.
* A workspace can be active in multiple windows at the same time.
* The mode menu (which is now in the Info Editor header) doesn't display "Grease Pencil Edit" mode anymore since its availability depends on the active editor. Will be fixed by making Grease Pencil an own object type (as planned).
* The button to change the active workspace object mode may get out of sync with the mode of the active object. Will either be resolved by moving mode out of object data, or we'll disable workspace modes again (there's a `#define USE_WORKSPACE_MODE` for that).
* Screen-layouts (`bScreen`) are IDs and thus stored in a main list-base. Had to add a wrapper `WorkSpaceLayout` so we can store them in a list-base within workspaces, too. On the long run we could completely replace `bScreen` by workspace structs.
* `WorkSpace` types use some special compiler trickery to allow marking structs and struct members as private. BKE_workspace API should be used for accessing those.
* Added scene operators `SCENE_OT_`. Was previously done through screen operators.
== BPY API Changes
* Removed `Screen.scene`, added `Window.scene`
* Removed `UserPreferencesView.use_global_scene`
* Added `Context.workspace`, `Window.workspace` and `BlendData.workspaces`
* Added `bpy.types.WorkSpace` containing `screens`, `object_mode` and `render_layer`
* Added Screen.layout_name for the layout name that'll be displayed in the UI (may differ from internal name)
== What's left?
* There are a few open design questions (T50521). We should find the needed answers and implement them.
* Allow adding and removing individual workspaces from workspace configuration (needs UI design).
* Get the override system ready and support overrides per workspace.
* Support custom UI setups as part of workspaces (hidden panels, hidden buttons, customizable toolbars, etc).
* Allow enabling add-ons per workspace.
* Support custom workspace keymaps.
* Remove special exception for workspaces in linking code (so they're always appended, never linked). Depends on a few things, so best to solve later.
* Get the topbar done.
* Workspaces need a proper icon, current one is just a placeholder :)
Reviewed By: campbellbarton, mont29
Tags: #user_interface, #bf_blender_2.8
Maniphest Tasks: T50521
Differential Revision: https://developer.blender.org/D2451
Although this is working fine, there are two changes expected in the new
future once depsgraph copy on write is implemented:
1) To call ED_info_stats_clear a callback from depsgraph, instead of the
notifier system. (that would also allow us to clear only one
SceneLayer).
2) To store/get stats from the evaluated SceneLayer, as well as iterate
over the evaluated objects as well.
We still need to update the RNA interface to access those. But since
there is no RNA_def_property_float_array_funcs I'm not sure how many
changes this will require.
Caused by rBe87ddda149b. Selecting objects shouldn't be done in such a
low level function anyway (IMHO).
Made sure duplicating objects still works correctly.
This add a new set of (possible) render settings that can be defined at
the scene level and overridable at the scene layer level.
Once we get workspaces we can either add workspace inbetween scene and
scene layer evaluation. Or to replace layer settings, to avoid extra
confusion to users.
An example of this setting is "samples", as implemented now for the clay
engine.
This implements weight rendering with the draw manager, with all drawing
options (Shading, wire, face masking, vertex masking).
This is part of T51208
Reviewers: campbellbarton
Subscribers: dfelinto
Differential Revision: https://developer.blender.org/D2654
With this we also do not need IDP_MergeGroupValues anymore.
If this causes problems in the future we can always make recursion an
option (like overwrite is).
The original code was failing because the base to object flushing was
only happening as part of the depsgraph. However we can use the
evaluated values to set the initial values of the base.
In this particular case, we couldn't set the new object visible because
its selectability flag was not set yet.
This replaces access to the first scene layer (which was wrong) with a linear
lookup of scene layer by it's active index.
This seems to be a better temporary solution to have things working for until
we've got proper workspace, depsgraph and it's per-layer storage in place.
