Currently, audio and video strips are synchronized based on data from
media stream, which is nice, but this causes gaps between strips.
This synchronization was implemented by moving movie strip position
relative to sound, which doesn't make much sense for user which is
mostly interested in editing video.
Code was bit hard to read, so it has been simplified. Ideally video
stream time would be easily accessible so synchronization could be done
at any time, but this is not necessary at this point.
Reviewed By: zeddb
Differential Revision: https://developer.blender.org/D13948
Fix formula in function `SEQ_sound_update_length`.
Formula for sound strip length was changed in commit ded68fb102, when
strip is added to timeline, but it was not changed in function
mentioned above.
This change applies only for automatic proxy building, when strip
is added to timeline. Manual building process is not affected.
Don't build proxy file if movie is already fast enough to seek.
To determine seek performance, check if whole GOP can be decoded
in 100 milliseconds.
To consider some variation in GOP size, large number of packets are
read, assuming that each packet will produce 1 frame. While this is not
technically correct, it does give quite accurate estimate of maximum GOP
size.
This test will ensure consistent performance on wide array of machines.
Check should be done in order of few milliseconds.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11671
Movies with variable frame rate can cause mismatch of displayed frame
when proxies are used. Since proxies are not used for rendering, this
means, that output may be different than expected. This problem can be
avoided when timecodes are used.
Set used timecode to Record Run. Timecodes are built with proxies at
the same time, therefore if proxies are built and used this will
resolve possible mismatch of output.
Record run is chosen, because it will show frames based on time they
were encoded by encoder and should match behavior as if movie was
played back at normal speed. This change is done only for new strips
in order to not overwrite user defined settings.
Other minor changes:
- When proxies are enabled, size 25% is no longer set by default. It was mostly annoying anyway.
- Silence warning when timecode file is not present. This was introduced in 4adbe31e2f.
Previously use of timecodes was hard-coded in sequencer and this error would spam console if timecodes would be
enabled by default and proxies would be never built.
ref: T95093
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13905
When copying strips between 2 scenes, it wasn't possible to copy
animation curves along with strips.
In this patch curves are copied into clipboard `ListBase`. When pasted,
original curves are moved into temporary `ListBase` and curves in
clipboard are moved into scene action. This is because when strips from
clipboard have to be renamed, function `SEQ_ensure_unique_name()` does
fix RNA paths of curves, but this is done globally for all curves within
action. After strips are renamed, restore original curves from backup.
Note: This patch handles only fcurves. Drivers and actions are currently
not handled anywhere in VSE.
Fixes T77530
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13845
- Move functions that handle animation to own file - `animation.c`
- Refactor `SEQ_offset_animdata` and `SEQ_free_animdata` functions
- Add function `SEQ_fcurves_by_strip_get` to provide more granular
and explicit way for operators to handle animation
- Remove function `SEQ_dupe_animdata`, do curve duplication explicitly
in operator code, which makes more sense to do. Further this function
was also used for renaming strips which makes no sense.
- Refactor usage of function `SEQ_free_animdata` and remove XXX comment.
Now this functiuon is no longer called when `Sequence` data is freed
implicitly, it is done explicitly in high level function
`SEQ_edit_remove_flagged_sequences`
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13852
This is my attempt of adding defaults for the space clip editor struct
(in line with https://developer.blender.org/T80164).
It adds the default allocation for `SpaceClip` and
`node_composite_movieclip.cc`. This also solves the error below (for
C++ files using the DNA_default_alloc), which was put forward by
Sergey Sharybin.
Differential Revision: https://developer.blender.org/D13367
Reviewed by: Julian Eisel
This patch implements the vector types (i.e:`float2`) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the `blender::math` namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
####Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others
we currently don't have (uintX, intX). All these variations were
asking for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector
functions should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the `BLI_(float|double|mpq)(2|3|4).hh` is a
bit of a let down. Most clases are incomplete, out of sync with each
others with different codestyles, and some functions that should be
static are not (i.e: `float3::reflect()`).
####Upsides:
- Still support `.x, .y, .z, .w` for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types
and can be restricted to certain types. Also template specialization
let us define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance
is the same.
####Downsides:
- Might impact debugability. Though I would arge that the bugs are
rarelly caused by the vector class itself (since the operations are
quite trivial) but by the type conversions.
- Might impact compile time. I did not saw a significant impact since
the usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length.
For instance, one can't call `len_squared_v3v3` in
`math::length_squared()` and call it a day.
- Type cast does not work with the template version of the `math::`
vector functions. Meaning you need to manually cast `float *` and
`(float *)[3]` to `float3` for the function calls.
i.e: `math::distance_squared(float3(nearest.co), positions[i]);`
- Some parts might loose in readability:
`float3::dot(v1.normalized(), v2.normalized())`
becoming
`math::dot(math::normalize(v1), math::normalize(v2))`
But I propose, when appropriate, to use
`using namespace blender::math;` on function local or file scope to
increase readability.
`dot(normalize(v1), normalize(v2))`
####Consideration:
- Include back `.length()` method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement. It felt
like too much for what we need and would be difficult to extend / modify
to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches `delaunay_2d.cc` and the intersection code. I would like
to know @howardt opinion on the matter.
- The `noexcept` on the copy constructor of `mpq(2|3)` is being removed.
But according to @JacquesLucke it is not a real problem for now.
I would like to give a huge thanks to @JacquesLucke who helped during this
and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: https://developer.blender.org/D13791
This patch implements the vector types (i.e:float2) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the blender::math namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others we
currently don't have (uintX, intX). All these variations were asking
for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector functions
should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the BLI_(float|double|mpq)(2|3|4).hh is a bit of a
let down. Most clases are incomplete, out of sync with each others with
different codestyles, and some functions that should be static are not
(i.e: float3::reflect()).
Upsides:
- Still support .x, .y, .z, .w for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types and
can be restricted to certain types. Also template specialization let us
define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance is
the same.
Downsides:
- Might impact debugability. Though I would arge that the bugs are rarelly
caused by the vector class itself (since the operations are quite trivial)
but by the type conversions.
- Might impact compile time. I did not saw a significant impact since the
usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length. For
instance, one can't call len_squared_v3v3 in math::length_squared() and
call it a day.
- Type cast does not work with the template version of the math:: vector
functions. Meaning you need to manually cast float * and (float *)[3] to
float3 for the function calls.
i.e: math::distance_squared(float3(nearest.co), positions[i]);
- Some parts might loose in readability:
float3::dot(v1.normalized(), v2.normalized())
becoming
math::dot(math::normalize(v1), math::normalize(v2))
But I propose, when appropriate, to use
using namespace blender::math; on function local or file scope to
increase readability. dot(normalize(v1), normalize(v2))
Consideration:
- Include back .length() method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement.
It felt like too much for what we need and would be difficult to
extend / modify to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches delaunay_2d.cc and the intersection code. I would like to
know @Howard Trickey (howardt) opinion on the matter.
- The noexcept on the copy constructor of mpq(2|3) is being removed.
But according to @Jacques Lucke (JacquesLucke) it is not a real problem
for now.
I would like to give a huge thanks to @Jacques Lucke (JacquesLucke) who
helped during this and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: http://developer.blender.org/D13791
Reduction of the number of uses of the define BLF_DRAW_STR_DUMMY_MAX
by using actual sizes of static character arrays.
See D13793 for more details.
Differential Revision: https://developer.blender.org/D13793
Reviewed by Campbell Barton
If timeline contains scene strip outside of edited meta strip, this will
cause crash. This is because prefetchin ignored meta strips being edited
when rendering, but did check for scene strips only inside edited meta
strip.
Change active seqbase pointer when entering meta strip. This makes it
possible to prefetch only content that is being presented to user.
Blend factor was used to adjust alpha of background image, which is not
correct. This was done in fdee84fd56 where another change was, that
background alpha is copied into result, which is correct.
Apply blend factor to foreground image alpha channel.
Some effect functions looped over alternating lines, previously with
different factors. Since only one factor is used, code can be
simplified by looping all lines in one for loop.
There should be no functional changes.
2 factor variables were passed to effects, but they were hard coded to
have same value.
Remove duplicate variable from arguments, rename single argument to
`fac`. Inverted factor variables were renamed to `mfac`. Any other
factor related variables are prefixed with `temp_`.
There should be no functional changes.
This happens because in `SEQ_time_update_sequence` function
`SEQ_get_meta_by_seqbase` returns uninitialized value. This isn't nice,
but it shouldn't happen in first place. Problem is, that
`SEQ_edit_strip_split` does move strips into detached `ListBase`, so
other functions can't see them anymore. Detached `ListBase` is used
solely to preserve relationships during duplication.
Move strips to original `ListBase` immediately after duplication and
return `NULL` if `SEQ_get_meta_by_seqbase` can't find meta strip.
Splitting itself can still rely on fact, that number of original and
duplicated strips is same and they are placed next to each other in
exactly same order at the end of original `ListBase`.
Since 88c02bf826 FFmpeg handles are freed if image is not displayed.
This change did not work correctly if strips are inside meta strip,
because overlap did not consider meta strip boundary, only strips inside
of meta strip.
Pass frame range to `sequencer_all_free_anim_ibufs`, if strip is inside
of meta strip, frame range is reduced to fit meta strip boundary, but if
meta strip is being edited, range must be set to +/-`MAXFRAME`,
otherwise playback performance would be too bad.
Use "filepath" which is the current convention for naming full paths.
- Main use "name" which isn't obviously a file path.
- BlendFileData & FileGlobal used "filename" which is often
used for the name component of a path (without the directory).
Some doc-strings were skipped because of blank-lines between
the doc-string and the symbol and needed to be moved manually.
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
Ref T92709
`IMB_transform` is used in VSE. It had a required crop parameter
for cropping the source buffer. This is not always needed.
In the image engine we want to use the use the `IMB_transform`
with wrap repeat. Both options are mutual exclusive and due
to performance reasons the wrap repeat is only available when
performing a nearest interpolation.
Commit f0d20198b2 used this field to flag rendered strips which were
queried by `SEQ_query_rendered_strips()`. Then operators iterate all
strips and checks state of `seq->tmp_flag`.
Use collection returned by `SEQ_query_rendered_strips` directly.
There should be no functional changes.
This commit adds functions `all_strips_from_context` and
`selected_strips_from_context` that provide collection of strips based
on context. Most operators can use this collection directly.
There is already `seq->tmp` DNA field, but is should not be used unless
absolutely necessary. Better option is to use human readable flag.
Best is to not use DNA fields for temporary storage in runtime.
If strip is removed while proxy is built, this causes crash when
building is finished. This happens because proxy anims are freed in
`SEQ_proxy_rebuild_finish()`.
Iterate over available strips and check if original strip still exists
by comparing `SessionUUID`.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13408
This function can be used to "dissolve" meta strip anywhere in strip
hierarchy. This has same effect as `meta_separate` operator.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/T91005
With transform tools, it is expected to see backgroud image when overlay
is transformed.
Alpha over caused performance to be not optimal when used with opaque
media. This should be addressed with D12914 at least partially. There
may be some corner cases not addressed.
Differential Revision: https://developer.blender.org/D12952
When scaling down image, users expect to see background, which doesn't
currently happen in VSE. This is because strips use cross blend mode by
default, because alpha over is much slower. Reason is, because any area
of image can be transparent, and therefore it can't have early out
implemented in a way that cross blend mode can.
Flag images rendered by codecs that don't support transparency as fully
opaque and implement a form of early out for alpha over blend mode.
When rendering image stack, 2-input effects are ignored on the
"way down". Alpha over needs rendered overlay image to decide whether it
will use only overlay or background too. Therefore overlay can be
rendered safely before it is used. Image flags can be checked and it can
be freed if needed. Freeing doesn't cause any performance degradation,
because image is always stored in cache.
This feature does not improve blend mode performance. In summary, it
only allowes for having alpha over blend mode on background images
without suffering from lower performance.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D12914
Some RNA properties and operators did not invalidate cache or did it
incorrectly.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13101
When proxy size lower than 100% is used, clip strips are rendered with
incorrect image size.
This is because if proxies aren't enabled in movieclip, it automatically
falls back on rendering original media. Sequencer doesn't have knowledge
about this and since 9c99292a16 it assumes that image is proxy,
because it explicitly requested this size.
Check movieclip flag to see if proxies are enabled.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13080
Allow the use of floating-point values for font point sizes, which
allows greater precision and flexibility for text output.
See D8960 for more information, details, and justification.
Differential Revision: https://developer.blender.org/D8960
Reviewed by Campbell Barton
This commit fixes T90633, it changes the behavior of the `Frame All`
operation when the user is tabbed into a metastrip: instead of using
the scene timeline's range, `Frame All` uses the current metastrip's
range.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D12974
When using downscaled preview size with proxies, transform effect
doesn't compensate for fact, that pixels are effectively larger. There
was compensation for scene render size already.
Use same compensation method as text effect uses for font size.
