After doing an import, the bounding box of the stroke was not calculated and any operation related to brushes (Sculpt, Weight Paint and Vertex Paint) was not working as expected because the bounding box of the stroke was wrong.
This problem was solved automatically after any edit operation, but must be solved in the import process.
This commit resolves these RNA warnings:
```
offset: "", WARN (bpy.rna): ...\source\blender\python\intern\bpy_rna.c:1505 pyrna_enum_to_py: current value '65536' matches no enum in 'FloatProperty', 'offset', 'subtype'
project_limit: "", WARN (bpy.rna): ...\source\blender\python\intern\bpy_rna.c:1505 pyrna_enum_to_py: current value '65536' matches no enum in 'FloatProperty', 'project_limit', 'subtype'
falloff_radius: "", WARN (bpy.rna): ...\source\blender\python\intern\bpy_rna.c:1505 pyrna_enum_to_py: current value '65567' matches no enum in 'FloatProperty', 'falloff_radius', 'subtype'
```
In the graph editor, Mirror Keys by Value would convert the value to mirror
over, to account for different units for linear & rotational properties.
The conversion was done in the different direction, though, resulting in
values that were too large by a factor of (180/pi)^2.
It was somewhat arbitrary to have this one pass enabled that adds a bit of
additional memory and render time overhead, even though it's not necessarily
more important than others.
Before this, all asset view templates showing the same asset library
would show the same assets, even if they should show different ID types.
That was a major limitation since the design did forsee that this
template can be put anywhere in the UI to display various sub-sets of
assets.
Initially I did the ID type filtering close to the asset-list reading,
because I wanted to optimize reading so that we would only actually read
asset information from disk of the ID type to be shown. But this will be
quite complex and I'm not sure if I'll get to work on this anytime soon.
So this commit moves the filtering to the template display level solving
this limitation.
Note: This also adds the code to filter by tags, together with the ID
type. But it's not actually used anywhere yet.
This iterator was introduced before `AssetHandle` existed, so it was
dealing with the file data directly. Now we want as little code as
possible to deal with the file data, all access should happen via the
`AssetHandle`.
When `BLI_task_parallel_mempool` does not use threading, the
`userdata_chunk` is allocated locally simulating a TLS.
However `func_reduce` is not called so the original chunk is ignored.
`task_parallel_iterator_no_threads` is another function that doesn't call
`func_reduce`. It also ignores `userdata_chunk_local` in the main iterator.
The solution in these cases is not to create a `userdata_chunk_local`.
This fixes T90131
Differential Revision: https://developer.blender.org/D12067
The preview was always using frame 1, but maybe the object has changed and it's better create preview using the current frame.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12018
Add overlay option to disable grid drawing.
Reuse drawing code from other editors (timeline editor)
Add argument `display_minor_lines` to function
`UI_view2d_draw_lines_x__discrete_frames_or_seconds`
This way minor line drawing can be disabled and so it doesn't cause
too much visual noise. Also spacing seems to be too fine, so VSE uses 3x
what is defined in preferences.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D11790
Snapping by default goes against convention, so this setting was
re-evaluated. Also snapping by default can conflict with new image
transform system, see T90156
There wasn't consensus, so disable snapping by default to follow
established convention.
ref T89665
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12054
Calculate frequency of time/frame label drawing, such that labels have
at least 10px margin and don't overlap.
Change timecode format:
- Use at least `mm:ss` format
- Don't display frames if all labels would end with +00
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D11792
The channel box selection was offset for grease pencil layers.
This is a proposed fix by @yann-lty
Before:
{F10227973}
After:
{F10227974}
Reviewed By: #grease_pencil, antoniov
Maniphest Tasks: T89952
Differential Revision: https://developer.blender.org/D11962
- Multi-dimensional boolean, int and float vector types are supported.
- A sequence of int's for the "size" is used to declare dimensions.
- Nested sequences are required for default arguments.
Now it's possible to define matrix properties, for e.g:
bpy.props.FloatVectorProperty(size=(4, 4), subtype='MATRIX')
Add array conversion functions that take dimension arguments.
- PyC_AsArray_Multi (version of PyC_AsArray).
- PyC_Tuple_PackArray_Multi_* (version of PyC_Tuple_Pack_*).
When viewing font files in the File Manager, this patch uses the font's
family and style names to show the same type of string shown to users
in operating system lists. For example "Book Antiqua Regular" instead
of "BKANT.ttf"
see D12020 for details and examples.
Differential Revision: https://developer.blender.org/D12020
Reviewed by Campbell Barton and Julian Eisel
WITH_CYCLES_DEBUG was used for rendering BVH debugging passes. But since we
mainly use Embree an OptiX now, this information is no longer important.
WITH_CYCLES_DEBUG_NAN will enable additional checks for NaNs and invalid values
in the kernel, for Cycles developers. Previously these asserts where enabled in
all debug builds, but this is too likely to crash Blender in scenes that render
fine regardless of the NaNs. So this is behind a CMake option now.
Fixes T90240
When using "Clear Asset" from the Asset Browser but with an asset
selected that is not stored in the current file, we can show a more
informative error message.
The viewer node in geometry node trees only supports geometry nodes.
This patch ensures that when ctrl shift clicking on a node, it will only
link to geometry sockets.
Differential Revision: https://developer.blender.org/D12055
This code was actually buggy (forcefully re-enabling excluded layers in some
cases).
Further more, it should not be needed now that layerCollection resync code
reuses as much as possible existing layers instead of deleting and
re-creating them all the time.
Differential Revision: https://developer.blender.org/D12016
The goal of this refactor is to improve resync of LayerCollections
hierarchy to match again Collection one.
Current code would destroy and re-create valid layers whenever a parent
collection would be removed, which leads to losing way too often
layer-related settings when editing collection hierarchies.
While this could be partially addressed from operators side, there was
no way to fix those issues from lower level, more generic ID management
code like ID remapping or library override resync processes.
The new code builds a shallow wrapper around existing (aka old) layers
hierarchy, does a set of checks to define the status of all existing
layers, and try to find the closest matching unused layer in cases where
layers and collections hierarchies do not match anymore.
The intent is to both re-use as much as possible existing layers, and
to pick the 'best' possible layer to re-use, following those heuristics:
* Prefer layers children of current one first (in old hierarchy), and only
use those from other higher-level hierarchies if no (grand-)child is found.
* Prefer to use closest layers available in the old hierarchy.
NOTE: The new code is about 12%-15% slower than the previous one, which is
expected given the increased complexity. Note that this would not be an
issue in practice if this code was not called way too often (needs to
be converted to lazy update instead, which is a long known TODO).
NOTE: The LayerCollectionResync code uses its own built-in version of
FIFO queue, as performances in this code is currently a critical point
(it can get called tens of thousands of times during a single (heavy)
ID management operation currently, in a production file e.g.).
Differential Revision: https://developer.blender.org/D12016
When deleting a node, links attached to that node are deleted, but if one
of those links was connected to a multi input socket, the indices of the
other links connected to it were not updated. This adds updates both in
the case of a normal delete as well as after a delete with reconnect.
Differential Revision: https://developer.blender.org/D11716
Followup to rB3834dc2f7b38 (where getting the proper particle system was
fixed for the Adjust Last Operation panel in the Properties Editor). But
since this operator can also be called from the 3DView, get a current
particle system there as well.
Without this, _all_ particle systems would be copied when executing from
the 3DView (which was never really intended [operator description uses
singular] -- it just happens to use `copy_particle_systems_to_object`
internally as well -- same as the `Copy Active/All to Selected Objects`
operators)).
ref. T83317
Maniphest Tasks: T83317
Differential Revision: https://developer.blender.org/D12033
Caused by {rB8cbff7093d65}.
Since above commit only one modifier would get calculated and the
displaylist boundingbox was calculated wrong.
Maniphest Tasks: T90154
Differential Revision: https://developer.blender.org/D12037
Expand camera effective region to a portion beyond image frame so strokes won't end right at the border.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D12049
Recent own rBabf3ce811f6e prevented any LayerCollection update during
the whole liboverride resync process, for both performances and feature
reasons.
However that means that the various runtime caches like the Base GHash
are not cleared anymore during ID remapping process, so we need to call
`BKE_main_collection_sync_remap` instead of `BKE_main_collection_sync`
when we finally are ready for this update.
Reported by @eyecandy (Andy Goralczyk) from Blender studio, thanks!
This patch adds propper tooltips to the effect strips in the "Add" menu.
Note that not all effect strips are actually in the "Effect Strips"
submenu like color strips, text strips or transitions. For these types
of effect strips, a dediacted tooltip is especially useful.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D11714
While transforming a strip, draw the background semi-transparent
if it overlaps with another strip. It's convenient to see what's
underneath, especially with the upcoming Overwrite feature.
Thanks to @iss for the help and review.
Add three functions that trim characters from the front & end of a
`StringRef`. All functions return a new `StringRef` that references a
sub-string of the original `StringRef`.
- `trim(chars_to_remove)`: strips all characters from the start and end
that occur in `chars_to_remove`.
- `trim(char_to_remove)`: same, but with a single character to remove.
- `trim()`: remove leading & trailing whitespace, so same as
`trim(" \r\n\t")`
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12031
Failure to return a list of the expected size & type wasn't
decrementing the value, leaking a reference.
Caused by 127b5423d6 a workaround for the
real error that was fixed f5e020a7a6.
This adds the operator name to the node label which is consistent with the shading nodes.
The vector node has `Vector` as a prefix.
The Attribute nodes already have a different coloured header.
The same label is used when collapsing nodes, this helps readability.
Reviewed By: pablovazquez
Differential Revision: https://developer.blender.org/D10749
Ths commit adds a new `IDNameLibMap` to `Main`, used during file reading
to quickly find already read linked IDs.
Without that, search would use string-based search over list of linked
data, which becomes extremely slow and inneficient in cases where a lot
of IDs are linked from a same library. See also {T89194}.
Extrem-usecase reported in T89194 is now about 4 times faster in linked
data reading (about 2 times faster for the whole .blend file loading).
More normal cases (like Sprites studio production files) have barely
measurable speed improvements, a few percents at best.
NOTE: `main_idmap` API was extended to support insertion and removal of
IDs from the mapping, avoids having to re-create the whole thing several
time during libraries expansion in readcode.
Differential Revision: https://developer.blender.org/D11757
