This was left over from when these scripts were loaded as modules,
where their names needed to be compatible with Pythons module naming.
Version patch existing files so text with register enabled
without a `.py` extension wont start executing on startup.
Resolves T89532.
In the `FileList` struct, rename the `AssetLibraryReference
*asset_library` field to `asset_library_ref` -- it's a description of
which asset library is used, and not the asset library itself.
This is to make space for a future `AssetLibrary *asset_library` field,
which will point to an actual asset library struct/class.
No functional changes.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D12151
Code freeing the array would not properly reset its length value to
zero.
Note that this corrupted data could also be saved in .blend files, so
had to bump fileversion and add some doversion code too.
Fix T90166: crash when creating a liboverride.
By the patch made it in master the version value already advanced (see https://developer.blender.org/D11839), so this versioning code needs to be moved down to that point.
Add overlay option to disable grid drawing.
Reuse drawing code from other editors (timeline editor)
Add argument `display_minor_lines` to function
`UI_view2d_draw_lines_x__discrete_frames_or_seconds`
This way minor line drawing can be disabled and so it doesn't cause
too much visual noise. Also spacing seems to be too fine, so VSE uses 3x
what is defined in preferences.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D11790
Snapping by default goes against convention, so this setting was
re-evaluated. Also snapping by default can conflict with new image
transform system, see T90156
There wasn't consensus, so disable snapping by default to follow
established convention.
ref T89665
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12054
Previously, this option was not exposed in the UI, only for the clip editor.
There were also multiple rna properties that did the same thing for each of the 2D editors.
There was also an issue where the property enum items were the same as the 3d view which didnt make much sense.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D12027
**Changes:**
- New enums correspond to 4 modes: `Stretch`, `Multiply`, `Frame Number` and `Length`.
- "`Multiply Factor`" has been removed;
- Value corresponding to "`use as speed`" enabled is now the value appended to the `Multiply` enum;
- Value corresponding to "`use as speed`" disabled is now the value appended to the `Frame Number` enum;
- Value corresponding to "`Scale to Length`" enabled is now the value appended to the `Length` enum;
- Except `Stretch` each mode has now its respective control values.
Differential Revision: https://developer.blender.org/D11856
Since recently it's possible to access assets from outside the
File/Asset Browser, via the asset view template. So we are slowly
moving away from file space specific code to dedicated asset system
code. I introduced `AssetLibraryReference` as a duplicate of
`FileSelectAssetLibraryUID`, with a plan to delete the latter in a
separate cleanup commit. That's exactly what this commit is.
This will cause Asset Browsers to open with the default "Current File"
Asset Library. We could avoid that, but it's a minor issue really.
This new variable was introduced with 7898089de3. We don't usually use
an `active` prefix variable. Plus, this makes the name match the one of
the Asset Browser active library variable, so we can use the
`rna_def_asset_library_reference_common()` helper for both.
This will cause Asset Views to open with the default "Current File"
Asset Library. We could avoid that, but it's a minor issue really.
Wording on the UI, slider consistency and material mask switches layout.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: http://developer.blender.org/D11839
After rB3b6ee8cee708 by @HooglyBoogly vertex groups were moved
to mesh data, and versioning code was provided to upgrade old
files. However, it fails to consider the case of linked duplicates
having different name lists, and dependent on the object order
can cause some of the names to be lost. This can even be all of
them, if there is a duplicate without any names, which can be
easily created by lazy Python code.
To fix this, change the code to use the longest available name list.
Differential Revision: https://developer.blender.org/D11958
When a vertex group is used to limit the influence of the modifier
to a subset of vertices, binding data for vertices with zero weight
is not needed. This wastes memory, disk space and CPU cycles.
If the vertex group contents is known to be final and constant,
it is reasonable to optimize by only storing data group vertices.
This has to be an option in case the group can change.
Supporting this requires adding a vertex index field and spliting
the vertex count into mesh and bind variants, but both happen to
fit in available padding. The old numverts field is renamed to the
new bound vertex count field to maintain the array length invariant.
Versioning is used to initialize the other new fields.
If a file with sparse binding is opened in an old blender version,
it is corrupted into a non-sparse bind with vertex count mismatch,
preventing the modifier from working until rebind.
Differential Revision: https://developer.blender.org/D11924
This per-workspace active asset library will be used by the asset views
later. Note that Asset Browsers have their own active asset library,
overriding the one from the workspace.
As part of this the `FileSelectAssetLibraryUID` type gets replaced by
`AssetLibraryReference` which is on the asset level now, not the
File/Asset Browser level. But some more work is needed to complete that,
which is better done in a separate commit.
This also moves the asset library from/to enum-value logic from RNA to
the editor asset level, which will later be used by the asset view.
This commit moves the storage of `bDeformGroup` and the active index
to `Mesh`, `Lattice`, and `bGPdata` instead of `Object`. Utility
functions are added to allow easy access to the vertex groups given
an object or an ID.
As explained in T88951, the list of vertex group names is currently
stored separately per object, even though vertex group data is stored
on the geometry. This tends to complicate code and cause bugs,
especially as geometry is created procedurally and tied less closely
to an object.
The "Copy Vertex Groups to Linked" operator is removed, since they
are stored on the geometry anyway.
This patch leaves the object-level python API for vertex groups in
place. Creating a geometry-level RNA API can be a separate step;
the changes in this commit are invasive enough as it is.
Note that opening a file saved in 3.0 in an earlier version means
the vertex groups will not be available.
Differential Revision: https://developer.blender.org/D11689
Caused by fba9cd019f, then fixed by 0e4245bc28, but without
subversion bump, so some files were still broken after fix.
Repeat fix again, but this time also bump subversion.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D11864
Correctly reset `prev` and `next` pointers of action group FCurves when
separating them into distinct `ListBase`s per `bActionGroup`.
These `NULL` pointers are necessary to temporarily demarcate the start &
end of the `bActionGroup::channels` list. Having them still point to
other FCurves caused ordering issues when moving curves towards the
start/end of a group.
This commit corrects the above issue and adds versioning code to rectify
any ordering issues that may have been caused. For this purpose the
`BKE_action_groups_reconstruct()` function is rewritten to avoid relying
on the `bAction::curves` list order or `prev` link integrity.
Differential Revision: https://developer.blender.org/D11811
Rename the mesh circle to "Mesh Circle", mesh line to "Mesh Line",
and mesh subdivide to "Mesh Subdivide". Previously they looked exactly
the same in the search menu, and the nodes themselves had the same
label. This is a "deep" rename that also renames internal defines and
function names to match the UI.
Note that this name is essentially never used anywhere, besides as 'information'
mostly accessible from python console. Those embedded IDs are not in Main, so they
are not accessible by name ever, and mostly unusable from animation perspective
(either drivers or fcurves).
Therefore, no breakage is expected in user scripts or addons, nor when
loading in older versions of Blender.
Reviewed By: dfelinto, brecht
Differential Revision: https://developer.blender.org/D11812
Caused by {rBfba9cd019f21}.
Above commit reordered toolsettings snapping flags but missed remapping
these for the UV toolsettings in versioning code.
Differential Revision: https://developer.blender.org/D11756
Change snapping behavior to snap strip edges when they are close to snap point.
Default behavior is, that each transformed strip is snapped to any other strip.
Implement snapping controls in sequencer tool settings. These controls include:
- Snapping on/off
- Ability to snap to playhead and strip hold offset points
- Filter snap points by excluding sound or muted strips
- Control snapping distance
Snapping controls are placed in timeline header similar to 3D viewport
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11646
This option allow users to see the view layer in context to the
others. It is particularly useful to see which view layers have which
collections enabled, and their render settings (holdout, ...).
This option is off by default.
Differential Revision: https://developer.blender.org/D11708
This patch adds a left aligned sidebar to the spreadsheet editor. This
Sidebar can be used to navigate the geometry component types and
attribute domains. It also provides a quick overview of domain sizes.
It replaces the two dropdowns in the regions header.
Next step will be to add the domain cycling shortcut
using the CTRL + mouse wheel.
Reviewer: Dalai Felinto (dfelinto), Julian Eisel (Severin),
Hans Goudey (HooglyBoogly).
Differential Revision: https://developer.blender.org/D11046
This patch adds support for filtering rows based on rules and values.
Filters will work for any attribute data source, they are a property
of the spreadsheet rather than of the attribute system. The properties
displayed in the row filter can depend on data type of the currently
visible column with that name. If the name is no longer visible, the
row filter filter is grayed out, but it will remember the value until
a column with its name is visible again.
Note: The comments in `screen.c` combined with tagging the sidebar
for redraw after the main region point to a lack of understanding
or technical debt, that is a point to improve in the future.
**Future Improvements**
* T89272: A search menu for visible columns when adding a new filter.
* T89273: Possibly a "Range" operation.
Differential Revision: https://developer.blender.org/D10959
In addition to the base bone transformation itself, B-Bones have
controls that affect transformation of its segments. For rotation
the features are quite complete, allowing to both reorient the
Bezier handles via properties, and to control them using custom
handle bones. However for scaling there are two deficiencies.
First, there are only X and Y scale factors (actually X and Z),
while lengthwise all segments have the same scaling. The ease
option merely affects the shape of the curve, and does not cause
actual scaling.
Second, scaling can only be controlled via properties, thus
requiring up to 6 drivers per joint between B-Bones to transfer
scaling factors from the handle bone. This is very inefficient.
Finally, the Z channels are confusingly called Y.
This commit adds a B-Bone Y Scale channel and extra B-Bone flag
fields to DNA with appropriate versioning (including for F-Curves
and drivers) in preparation to addressing these limitations.
Functionality is not changed, so the new fields are not used
until the following commits.
Differential Revision: https://developer.blender.org/D9870
Note: Linking in this case as in link vs. append. Easily confused with linking
a data-block to multiple usages (e.g. single material used by multiple
objects).
Adds a drop-down to the Asset Browser header to choose between Link and Append.
This is probably gonna be a temporary place, T54642 shows where this could be
placed eventually.
Linking support is crucial for usage of the asset browser in production
environments. It just wasn't enabled yet because a) the asset project currently
focuses on single user, not production assets, and b) because there were many
unkowns still for the workflow that have big impact on production use as well.
With the recently held asset workshop I'm more confident with enabling linking,
as design ideas relevant to production use were confirmed.
Differential Revision: https://developer.blender.org/D11536
Reviewed by: Bastien Montagne
So far, linked IDs were not properly sorted at all, only the ones
explicitely linked from WM code would be, but any indirectly linked
data-blocks would end up in some random order in their lists.
While not ideal, this is not a huge issue in itself, but it had bad
side-effects, e.g. causing (recursive) resync of overrides to happen in
random order, leading to mismatches between name indices of newly-generated
override IDs and the one existings e.g.
And in general, it is much better to be consistent here.
Note that the file sub-version is bumped for this commit, since some
sorting (the directly linked IDs which we keep a reference to) should
never need to be re-done after relevant doversion process.
Based on the task T88006, there are a few simple changes
to make to improve the switch node:
- Change the label to "False" / "True" for clarity
- Change default to geometry, as it's the basic data container in
geometry nodes.
- Change node class to `NODE_CLASS_CONVERTOR`, which was an oversight
in the original patch.
I will add the new socket types (material and texture) in a separate commit.
Thanks to @EitanSomething for the original patch.
Differential Revision: https://developer.blender.org/D11165
There is a new Texture data-block socket that we can use in Geometry
Nodes now. This commit replaces the texture property of a node and
gives it a texture input socket instead. That increases flexibility.
The texture socket still has some limitations that will be lifted in the
next couple of days (e.g. it's not supported by the switch node and
cannot be exposed the a modifier yet).
Differential Revision: https://developer.blender.org/D11222
Add translation/rotation/scale parameters for custom bones shapes. The
new scale is a 3D vector `custom_shape_scale_xyz`, and replaces the
`custom_shape_scale` float.
Reviewed By: #animation_rigging, sybren, zeddb
Differential Revision: https://developer.blender.org/D10974
Internally, when using Fill brush a dilate of the filled area was done, but this was hardcoded to 1 pixel.
In some situations, this was not enough, so now the value is accesible in the UI and can be set with different values.
Also, as this value is more used than `Leak Size`, the new Dilate is on Topbar, and Leak Size has been moved to Advanced panel.
Text data block were not considered special in the recursive purge
function. So they would get deleted if they had no actual users.
To fix this we instead make text data block use "fake user" so that
addon authors can specify script files that should be removed if nothing
is using it anymore.
Per default, new text object have "fake user" set. So functionality
wise, the user has to explicitly specify that they want the text object
to be purge-able.
Reviewed By: Bastien
Differential Revision: http://developer.blender.org/D10983
