This adds a new `select_linked` function that selects all the points
on a curve if there is at least one point already selected.
This also adds a keymap for the operator.
Co-authored-by: Falk David <falkdavid@gmx.de>
Pull Request #104569
Add `contains_group` method in python api for `NodeTree` type, cleanup
`ntreeHasTree` function, reuse `ntreeHasTree` in more place in code.
The algorithm has been changed to not recheck trees by using set.
Performance gains from avoiding already checked node trees:
Based on tests, can say that for large files with a huge number
of trees, the response speed of opening the search menu in the
node editor increased by ~200 times (for really large projects
with 16 individual groups in 6 levels of nesting). Group insert
operations are also accelerated, but this is different in some cases.
Pull Request #104465
This just adds `threading::parallel_for` and `threading::parallel_invoke` in a few
places where it can be added trivially. The run time of the `separate_geometry`
function changes from 830 ms to 413 ms in my test file.
Pull Request #104563
Using callback functions didn't scale well as more arguments are added.
It got very confusing when to pass tehmarguments weren't always used.
Instead use a `FunctionRef` with indices for arguments. Also remove
unused edge arguments to topology mapping functions.
Adds an experimental option under "New Features" in preferences,
which enables visibility of the new Volume Nodes.
Right now this option does nothing but will be used during development.
See #103248
Pull Request #104552
Because of T95965, some attributes are stored as generic attributes
in Mesh but have special handling for the conversion to BMesh.
Expose a function to tell whether certain attribute names are handled
specially in the conversion, and refactor the error checking process
to use it. Also check for generic attributes on the face domain which
wasn't done before.
Author: Hans Goudey
Reviewed By: Joseph Eagar
Co-authored-by: Joseph Eagar <joeedh@gmail.com>
Pull Request #104567
When merging two gpencil layers, if the destination layer had a keyframe
where the source layer did not, strokes of the previous keyframe
in source layer were lost in that frame.
This happened because the merge operator was looping through
frames of the source layer and appending strokes in the
corresponding destination layer, but never completing
other frames than the ones existing in the source layer.
This patch fixes it by first adding in source layer
all frames that are in destination layer.
Co-authored-by: Amelie Fondevilla <amelie.fondevilla@les-fees-speciales.coop>
Pull Request #104558
When the sequencer is empty (i.e., there are no sequences),
we would have the deselect_all variable set to true called
ED_sequencer_deselect_all to select any existing sequences.
Ref !104453
Box-Selecting channels in the dope sheet with click-drag was no longer possible as of Blender 3.2
Due to the removal of tweak events the box select operator was always shadowed by the click operator.
Original Phabricator discussion here: https://archive.blender.org/developer/D17065
Use `WM_operator_flag_only_pass_through_on_press` on click operator to fix it
Co-authored-by: Christoph Lendenfeld <chris.lenden@gmail.com>
Pull Request #104505
Without this, every access to "language" would warn that the enum
value didn't match a value in the enum items.
This made the bl_rna_manual_reference.py test output practically
unusable.
Documented all functions, adding use case and side effects.
Also replace the use of shortened argument name by more meaningful ones.
Renamed `GPU_batch_instbuf_add_ex` and `GPU_batch_vertbuf_add_ex` to remove
the `ex` suffix as they are the main version used (removed the few usage
of the other version).
Renamed `GPU_batch_draw_instanced` to `GPU_batch_draw_instance_range` and
make it consistent with `GPU_batch_draw_range`.
When nodes are copied to the clipboard, they don't need their declaration.
For nodes with dynamic declaration that might depend on the node tree itself,
the declaration could not be build anyway, because the node-clipboard does
not have a node tree.
Pull Request #104432
Add a new node that groups faces inside of boundary edge regions.
This is the opposite action as the existing "Face Group Boundaries"
node. It's also the same as some of the "Initialize Face Sets"
options in sculpt mode.
Discussion in #102962 has favored "Group" for a name for these
sockets rather than "Set", so that is used here.
Pull Request #104428
Currently there's no way to assign a geometry node group from the asset
browser to an object as a modifier without first appending/linking it
manually. This patch adds a drag and drop operator that adds a new
modifier and assigns the dragged tree.
Pull Request #104430
As described in #95966, replace the `ME_EDGEDRAW` flag with a bit
vector in mesh runtime data. Currently the the flag is only ever set
to false for the "optimal display" feature of the subdivision surface
modifier. When creating an "original" mesh in the main data-base,
the flag is always supposed to be true.
The bit vector is now created by the modifier only as necessary, and
is cleared for topology-changing operations. This fixes incorrect
interpolation of the flag as noted in #104376. Generally it isn't
possible to interpolate it through topology-changing operations.
After this, only the seam status needs to be removed from edges before
we can replace them with the generic `int2` type (or something similar)
and reduce memory usage by 1/3.
Related:
- 10131a6f62
- 145839aa42
In the future `BM_ELEM_DRAW` could be removed as well. Currently it is
used and aliased by other defines in some non-obvious ways though.
Pull Request #104417
This adds a `select_box` function for the `Curves` object. It is used in the `view3d_box_select` operator.
It also adds the basic selection tools in the toolbar of Edit Mode.
Authored-by: Falk David <falkdavid@gmx.de>
Pull Request #104411
`bAnimContext` had a float property called `yscale_fac` that was used to define the height of the keyframe channels.
However the property was never set, only read so there really is no need to have it in the struct.
Moreover it complicated getting the channel height because `bAnimContext` had to be passed in.
Speaking of getting the channel height. This was done with macros. I ripped them all out and replaced them with function calls.
Originally it was introduced in this patch: https://developer.blender.org/rB095c8dbe6919857ea322b213a1e240161cd7c843
Co-authored-by: Christoph Lendenfeld <chris.lenden@gmail.com>
Pull Request #104500
Blender was reporting that the GPU_TEXTURE_USAGE_HOST_READ wasn't set.
This is used to indicate that the textures needs to be read back to
CPU. Textures that don't need to be read back can be optimized by the
GPU backend.
Found during investigation of #104282.
This allow to bypass all cost associated with shadow mapping.
This can be useful in certain situation, such as opening a scene on a
lower end system or just to gain performance in some situation (lookdev).
The merge with master updated the code to use the new matrix API. This
introduce some regressions.
For sunlights make sure there is enough tilemaps in orthographic mode
to cover the depth range and fix the level offset in perspective.
Implements virtual shadow mapping for EEVEE-Next primary shadow solution.
This technique aims to deliver really high precision shadowing for many
lights while keeping a relatively low cost.
The technique works by splitting each shadows in tiles that are only
allocated & updated on demand by visible surfaces and volumes.
Local lights use cubemap projection with mipmap level of detail to adapt
the resolution to the receiver distance.
Sun lights use clipmap distribution or cascade distribution (depending on
which is better) for selecting the level of detail with the distance to
the camera.
Current maximum shadow precision for local light is about 1 pixel per 0.01
degrees.
For sun light, the maximum resolution is based on the camera far clip
distance which sets the most coarse clipmap.
## Limitation:
Alpha Blended surfaces might not get correct shadowing in some corner
casses. This is to be fixed in another commit.
While resolution is greatly increase, it is still finite. It is virtually
equivalent to one 8K shadow per shadow cube face and per clipmap level.
There is no filtering present for now.
## Parameters:
Shadow Pool Size: In bytes, amount of GPU memory to dedicate to the
shadow pool (is allocated per viewport).
Shadow Scaling: Scale the shadow resolution. Base resolution should
target subpixel accuracy (within the limitation of the technique).
Related to #93220
Related to #104472
Subdivision surface efficiency relies on caching pre-computed topology
data for evaluation between frames. However, while eed45d2a23
introduced a second GPU subdiv evaluator type, it still only kept
one slot for caching this runtime data per mesh.
The result is that if the mesh is also needed on CPU, for instance
due to a modifier on a different object (e.g. shrinkwrap), the two
evaluators are used at the same time and fight over the single slot.
This causes the topology data to be discarded and recomputed twice
per frame.
Since avoiding duplicate evaluation is a complex task, this fix
simply adds a second separate cache slot for the GPU data, so that
the cost is simply running subdivision twice, not recomputing topology
twice.
To help diagnostics, I also add a message to show when GPU evaluation
is actually used to the modifier panel. Two frame counters are used
to suppress flicker in the UI panel.
Differential Revision: https://developer.blender.org/D17117
Pull Request #104441
The ear clipping method used by polyfill_2d only excluded concave ears
which meant ears exactly co-linear edges created zero area triangles
even when convex ears are available.
While polyfill_2d prioritizes performance over *pretty* results,
there is no need to pick degenerate triangles with other candidates
are available. As noted in code-comments, callers that require higher
quality tessellation should use BLI_polyfill_beautify.
Sockets after the geometry socket were ignored when cycling through
the node's output sockets. If there are multiple geometry sockets, the
behavior could still be refined probably, but this should at least make
basic non-geometry socket cycling work.
Minor change to [0], prefer calling em_setup_viewcontext,
even though there is no functional difference at the moment,
if this function ever performs additional operations than assigning
`ViewContext.em`, it would have to be manually in-lined in
`view3d_circle_select_recalc`.
[0]: 430cc9d7bf
