Some doc-strings were skipped because of blank-lines between
the doc-string and the symbol and needed to be moved manually.
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
Ref T92709
Replace local static mouse coordinate storage with a single function.
also resolve inconsistencies.
- Edit-mesh selection used equality check (ignoring `U.move_threshold`).
- Motion to clear tooltips checked the value without scaling by the DPI.
Also prevent the unlikely case of the previous motion check matching
a different area by resetting the value when the active region changes.
This commit cleans up the RNA names of select mirror operators so that
they are all "Select mirror".
This makes the select menu in edit/pose mode consistent regardless of
object type.
Differential Revision: https://developer.blender.org/D7356
This adds the ability to get a selection list for both edit mode bones
and pose mode bones.
To do this the selection menu list logic had to be reworked a bit.
Before it only stored the names of objects. This might work will of
objects, however as stated in the code, it might fail for linked objects
(so multiple object can have the same name in some corner cases).
For bones it is a very common occurance where you can have multiple
armature that has the same bone names. So now it also stores the object
and bone pointers for this case.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D10570
Fix T85796
Approximately 141 changes of capitalization to conform to MLA title style.
Differential Revision: https://developer.blender.org/D8392
Reviewed by Julian Eisel
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
Picking is disabled
Affected were (at least)
- Select Linked pick
- Select Shortest Path
Was originally caused by rB8b347fc2cdc6 [which got improved in
rBfc8a7a44b200 - but only partially].
After removal of BONESEL_NOSEL we have to filter out -1 from the hits for
any bone picking it seems (since armature drawing uses this).
In rBfc8a7a44b200, this was done for 'ED_armature_edit_select_pick' (or
'get_nearest_editbonepoint' precisely), now do this for
'ed_armature_pick_bone_impl' as well.
Reviewers: campbellbarton
Maniphest Tasks: T81200
Differential Revision: https://developer.blender.org/D9080
The was caused by 8b347fc2cd as the old BONESEL_NOSEL flag
handled the -1 case (used for none).
Instead of checking for -1, remove these elements from the array
as selection code makes decisions based on the number of hits detected.
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
There was one function to access both pose/edit bones,
which returned a void pointer type.
Split these into 3 functions which return EditBone, bPoseChannel or Bone
types.
Internally the logic is still shared, this just makes it clearer to
callers which type is expected.
Also use more conventional prefix for picking API:
- ED_armature_pick_(ebone/pchan/bone)
- ED_armature_pick_(ebone/pchan/bone)_from_selectbuffer
Selecting linked would only select a single arbitrary chain.
Now select linked follows all child-chains of the bone.
Also add support for following all links, similar to how this would work
if it were a mesh with connected edges instead of only child chains.
Leave this off by default to match pose mode.
Select Similar Group and Select Similar Shape had this issue since they
were added. Basically it assumes there is pose data which in some cases
it does not.
This is the unification of all overlays into one overlay engine as described in T65347.
I went over all the code making it more future proof with less hacks and removing old / not relevent parts.
Goals / Acheivements:
- Remove internal shader usage (only drw shaders)
- Remove viewportSize and viewportSizeInv and put them in gloabl ubo
- Fixed some drawing issues: Missing probe option and Missing Alt+B clipping of some shader
- Remove old (legacy) shaders dependancy (not using view UBO).
- Less shader variation (less compilation time at first load and less patching needed for vulkan)
- removed some geom shaders when I could
- Remove static e_data (except shaders storage where it is OK)
- Clear the way to fix some anoying limitations (dithered transparency, background image compositing etc...)
- Wireframe drawing now uses the same batching capabilities as workbench & eevee (indirect drawing).
- Reduced complexity, removed ~3000 Lines of code in draw (also removed a lot of unused shader in GPU).
- Post AA to avoid complexity and cost of MSAA.
Remaining issues:
- ~~Armature edits, overlay toggles, (... others?) are not refreshing viewport after AA is complete~~
- FXAA is not the best for wires, maybe investigate SMAA
- Maybe do something more temporally stable for AA.
- ~~Paint overlays are not working with AA.~~
- ~~infront objects are difficult to select.~~
- ~~the infront wires sometimes goes through they solid counterpart (missing clear maybe?) (toggle overlays on-off when using infront+wireframe overlay in solid shading)~~
Note: I made some decision to change slightly the appearance of some objects to simplify their drawing. Namely the empty arrows end (which is now hollow/wire) and distance points of the cameras/spots being done by lines.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6296
Particularly noticeable when vertex painting with a subsurf modifier.
In some cases every sculpt or paint stroke step would evaluate the dependency
graph. This should only happen for redraws. Now more selectively choose if the
dependency graph should be evaluated to initialize the view context. Doing it
in the view context evaluation is somewhat hidden, now it's more explicit.
Differential Revision: https://developer.blender.org/D5844
Adds a toggle to the filter menu for outliner synced selection. Enabled
by default, this ensures selection is synced between objects, bones, and
sequences. An active outliner element theme color is added to indicate
which element is active.
Synced selection is controlled on the operator level. Each operator
that modifies selection for objects, bones, sequences, or outliner
elements needs to call the respective ED_outliner_select_sync_from..
function to tag outliners to be synced.
Syncing is done lazily on outliner draw.
When using multiple viewlayers and switching between them the selection
gets buggy. The reason for this is that the select_id is updated based
on the index in the viewlayer. This makes the select_id not unique as
objects might be shared or not shared at all.
This fix will update the select_id on all objects in main. This will be triggered in all the selection operators.
Reviewed By: sergey, brecht
Maniphest Tasks: T55617
Differential Revision: https://developer.blender.org/D4824
Now the depth order of objects when trying to select them is only used when not in X-ray mode.
Before, this was only the case in wireframe mode regardless of X-ray settings.
I've also unified the usage of V3D_XRAY and XRAY_FLAG as they were basically copies of each other.
Reviewed By: Clément
Differential Revision: http://developer.blender.org/D4504
This removes `VIEW3D_OT_select_or_deselect_all`, adding a
deselect_all option to the `VIEW3D_OT_select` operator.
- Add utility functions to simplify de-selecting all.
- Return true from selection functions when they change the selection
to avoid redundant updates.
- Use arrays of bases when passing objects between selection utility
functions since some users require bases.
- Fix logical error in box selection that updated all objects after
the first hit.
A hard coded threshold was used to ignore cursor motion,
make this a preference since tablet users may want to increase it
since a pen hovering isn't as easy to keep still as a mouse.
Resolves T56278
Bone selectability in edit mode now matches the behavior of pose mode
(can no longer be selected).
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D4469
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
