This patch implements the list panel system D7490 for modifiers.
It also moves modifier drawing to a callback in ModifierTypeInfo
in line with the extensible architecture refactoring goal T75724.
This adds a PanelRegister callback and utilities for registering
panels and subpanels. It also adds the callbacks for expansion saving
and drag and drop reordering described in D7490.
These utilities, callbacks, and other common UI elements shared
between modifiers live in MOD_ui_common.c.
Because modifier buttons are now in panels, we can make use of
subpanels for organization. The UI layouts also use the single
column layout style consistently used elsewhere in Blender.
Additionally, the mode-setting buttons are aligned and ordered
consistently with the outliner.
However, the large number of UI changes in this patch may mean
that additional polishing is required in master.
Thanks to William Reynish (@billreynish) who did a fair amount of the
layout work and to Julian Eisel (@Severin) for consistent help.
Differential Revision: https://developer.blender.org/D7498
Please note that vertices which are in a vgroup are not affected by this
option (which means that affected vertices from 'selection' modes remain
the same). Only the weights of selected vertices get inverted.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D7811
When setting the start cap of the array modifier it does not update when
updating the start cap objects geometry.
This patch switches the property update to rna_Modifier_dependency_update,
the same as the end cap which works properly.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D7584
For now the "Simulation" modifier only exists for point cloud objects, because
we need this for the particle system. Right now, the modifier is doing nothing.
There is a new `DEG_add_simulation_relation` function that is used
by the modifier to make sure that the simulation is evaluated before
the modifier is executed.
Reviewers: brecht, sergey
Differential Revision: https://developer.blender.org/D7549
Was flipping around the 0-1 range, now (optionally) flip around each tile.
Also added this option for BMesh bmo_mirror.
Reviewed By: campbellbarton
Maniphest Tasks: T75793
Differential Revision: https://developer.blender.org/D7460
While the name "Simulate" might be more accurate, there is
a naming collision with the new modifier added in D7549.
Therefore, we decided to rename the category for now.
Add an option to solidify complex which will make faces which have thickness
controlled by vertex weights flat/even, and parallel to their original face.
For each face it uses the minimal weight assigned to its vertices to control
the thickness.
This will help users for example in architecture or basic CAD design by finally
making solidify work there at all if altering thickness is needed.
Differential Revision: https://developer.blender.org/D7340
Reviewed and minor cleanups by Batien Montagne (@mont29).
Adds a slider to solidify which allows the user to add bevel weight on the outside
or remove bevel weight from the inside.
Also includes a very small improvment for working with subsurface modifier where
the rim edge in complex solidify will now also have a chance to get a crease if
there is only two adjacent edges.
Differential Revision: https://developer.blender.org/D7334
Reviewing and minor cleanups: Bastien Montagne (@mont29).
* Implemented the algortihm that would merge vertices to the weighted
center between them.
* Exposed the merge threshold to the user.
The new default tolerance is 0.0001 (versionning code ensures that
previous default value remains in use to avoid any change in existing
files).
Review and minor changes/cleanups from Bastien Montagne (@mont29).
This patch adds the option to use an armature bone in place of an object for texture mask coordinates.
This affects the 3 vertex weight modifiers, the displace modifier, the warp modifier, and the wave modifier.
With minor changes from Bastien Montagne (@mont29).
Differential Revision: https://developer.blender.org/D7348
This adds the Voxel Mode to the current remesh modifier. It works
exactly the same way as the voxel remesh operator and uses the same
properties to control the remeshing. We can exand this with more options
in the future (fix poles, reprojection...)
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7292
The Screw Modifier had a lower limit for the steps value, which not only
was inconsistent between render and viewport steps, but also was capped
to 2 in UI and also in the code internally.
This commit aims to add functionality to the surface deform modifier that
gives more control and allows it to work better with the modifier stack.
* Maintains compatibility with older files. The default settings keep it
so that the whole object is bound and vertex coordinates get overwritten
as the modifier currently does.
* Turns the deformations from an absolute vertex coordinate overwrite into
an additive offset from the vertex location before the modifier to the
resulting bound deformation. This gives the ability to control the
strength of the deformation and mix the deformation of the modifier
with the modifier stack that comes before it.
* Also adds in a vertex group with the invert option. This is applied after
the bind deformation is added. So the whole object is still bound to target,
and the vertex group filters afterwards what parts get affected.
I experimented with a version to only binds the geometry weighted to the
vertex group, but that would break compatibility with old files.
I may bring it in later as a separate option/mode for the surface deform.
With several fixes from @mont29.
Reviewed By: mont29
Differencial Revision: https://developer.blender.org/D6894
This commit gives the solidify modifier the ability to assign the newly created shell
and rim geometries to selected vertex groups. This expands the procedural control over
the modifier stack by letting users apply modifiers to the shell geometry without affecting
the original geometry.
This will be especially helpful for NPR users that use solidify to create backface
culling lines on their characters giving them the ability to add displace noise
and other effects.
Differential Revision: https://developer.blender.org/D6903
This commit adds the option to use armature bones for the From and To targets
when using armature objects.
The changes are based on the UV Warp modifier.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D6820
This commit adds the option to invert the resulting weights of the
falloff curve.
There is a workflow used by some to convert a texture mask into
vertex weights by using a custom curve and inverting the points.
This allows the same effect with a single click, and gives the modifier
more procedural functionality.
With minor UI tweaks by @mont29.
Differential Revision: https://developer.blender.org/D6899
This extends the ocean modifier to add new spectra
(Pierson-Moskowitz, Jonswap, TMA).
These models are very different to the Phillips spectrum.
They are intended for more established,
large area, oceans and/or shallow water situations.
When scaling the root bone of a rig to apply a global scale, the
corrective smooth modifier results in wrong deformation due to incorrect
scaling. The delta calculations are not taking into account any scale
value.
To fix it, a scale property is added to the modifier, allowing to set
manually the scale value for the deltas by simply multiplying the
vectors by this value. There is a similar implementation in Maya's Delta
Mush deformer. This property can be for example driven by the scale of
the root bone of the rig, to dynamically update when the animator scale
this bone.
Reviewed By: brecht, sybren
Differential Revision: https://developer.blender.org/D6622
Adds the invert vgroup option to the UVWarp modifier. Adds a flag and char padding to the DNA.
Differential Revision: https://developer.blender.org/D6841
Currently the only option is to warp based on the transform of other
objects, which is inconvenient if you want to e.g. control it through
a driver - you need to set up a dummy object and go through that,
which is clunky and should be unneccessary.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D6690
Adds the invert vgroup mask option to the Vertex Weight modifiers.
These 3 modifiers share the same functions so they needed to be modified at the same time. They are all setup the same with the invert vgroup option being added. I had to add a flag to the Mix modifier but the others I use the existing flags.
Differential Revision: https://developer.blender.org/D6819
Adds the invert vertex group option to the smooth modifier.
Setup same way as previous modifiers.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D6745
Adds the invert vertex group option to the Curve modifier.
Adds a short flag and char pad to the Curve modifier DNA. Passes the flag into the curve_deform_verts function as the weight values are found there and not in the modifiers .c file.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D6746
