Before this change, object-data could only have
one of the objects referencing it in edit-mode.
Reverting since multiple meshes in edit-mode (for the same object data)
isn't thread-safe as the evaluated edit-meshes are created in the
original edit-mesh, causing a crash updating the depsgraph
for linked duplicates, see: T86767.
While we could support this case, it's a bigger project without
significant benefits, so reinstate the limitation of only
allowing a single object to be in edit-mode for each object data.
This adds back the error from T85974 which caused an assertion
but didn't crash in release builds.
This reverts commit 2b60d7d09c.
This commit essentially touches to post-processing of collections and
objects after resync itself has been done, to ensure their proper
instantiation in the scene:
- Remove a lot of the process in resync case (resynced data are assumed
to be already instantiated in the scene, unlike override creation
case).
- For auto-resync, only do post-processing once after all overrides
have been resynced (doing it after each individual resynced was
causing a lot of instantiation glitches, with a lot of unwanted
extra objects and collections being added to the master collection).
It also deals in a much more reliable way with detection of objects
missing from the scene, by using the new `BKE_scene_objects_as_gset`
utils.
As a bonus this makes auto-resync process slightly faster (only by a few
percents, but that's always good to get).
This is internaly using the code of `BKE_scene_objects_iterator` and
steals its gset. More efficient than using that iterator directly to
rebuild another GSet...
In folded view, some type of data are listed as one icon per item,
others are 'compacted' as a single icon with a counter.
This commit adds bones (edit, normal and pose ones), pose groups and
vertex groups as 'compacted' ones in folded view.
Part of D10855.
This is a minimal, information-only view currently, listing by default
all the override data-blocks, with their user-edited override
properties.
System-generated overrides (like the overrides of pointers to other
override data-blocks) can be shown through a filter option.
Finally, potential info or warning messages from (auto-)resync propcess
are also shown, as an icon + tooltip next to the affected items.
Part of D10855.
This flag is set for liboverride IDs that are detected as no longer
needed by resync process, while having been user-edited, so
auto-handling code cannot silently delete them.
Exposing those to users will be part of the new incoming Override
Outliner view.
Part of D10855.
This removes a lot of unnecessary code that is generated by
the compiler automatically.
In very few cases, a defaulted destructor in a .cc file is
still necessary, because of forward declarations in the header.
I removed some defaulted virtual destructors, because they are not
necessary, when the parent class has a virtual destructor already.
Defaulted constructors are only necessary when there is another
constructor, but the class should still be default constructible.
Differential Revision: https://developer.blender.org/D10911
This code is incompatible with .blend files from subversion 16 and 17.
The ideal would be to create a new subversion when landed rBf674976edd88.
But for now, due to the delay, moving the code to the previous subversion
can solve it.
The function name was not very specific, this makes it clearer that it
works on instances rather than only real geometry. Also use `r_`
prefix for the return argument.
During review of D10730 it was discovered that the "uv" name causes
issues for cycles, which uses it as a default internal data name. While
that could be fixed in the future, there was no particular reason to use
"uv" instead of "uv_map", so we use the latter instead here, which
is consistent with the lowercase naming scheme chosen for attributes.
Some of the BMesh primitive operators have a lot of overhead due to the
fact that they use other operators like extrusion, removing doubles,
and rotation, to build each shape rather than filling arrays directly.
Implementing the primitives directly with the Mesh data structure is
much more efficient, since it's simple to fill the result data based
on the known inputs. It also allows also skip the conversion from BMesh
to Mesh after the calculations.
Speed matters more for procedural operations than for the existing
operators accessible from the add menu, since they will be executed
every evaluation rather than once before a destructive workflow.
| Shape | Before (ms) | After (ms) | Speedup (x times faster) |
| -------- | -------------| ------------| -------------------------|
| Cylinder | 1.1676 | 0.31327 | 3.72 |
| Cone | 4.5890 | 0.17762 | 25.8 |
| Sphere | 64213.3 | 13.595 | 4720 |
The downside of this change is that there will be two implementations
for these three primitives, in these nodes and in `bmo_primitive.c`.
One option would be re-implementing the BMesh primitives in terms of
this code, but that would require `BMesh` to depend on `Mesh`, which
is currently avoided. On the other hand, it will be easier to add new
features to these nodes like different fill types for the top and the
bottom of a cylinder, rings for a cylinder, and tagging the output with
boolean attributes. Another factor to consider is that the add mesh
object operator could be implemented with these nodes, just providing
more benefit for a faster implementation.
As a future cleanup, there is room to share code that generates the
"rings" topology between different nodes that generate meshes.
Differential Revision: https://developer.blender.org/D10730
When having a checkbox and a value both in one row together with an
animation decorator it is questionable whether the decorator should act
on animating the checkbox or the corresponding value. At the moment,
usage in modifiers does not seem to be very consistent:
Here the animation decorator works for animating the checkbox:
- `Build` (greasepencil) > `Factor` (this was reported and is changed in
this patch to act on the value instead of the checkbox)
- `DataTransfer` > `Topology Mapping` > `Max Distance` (this I guess
should also act on the value instead of the checkbox)
- `Edge Split` > `Edge Angle` (questionable)
- `Mirror` > `Merge` (questionable)
- `Screw` > `Merge` (questionable)
- `Wireframe` > `Crease Edges` (questionable)
Here the animation decorator works for animating the value:
- `VertexWeightEdit` > `Group Add/Remove Threshold`
- `Decimate` > `Symmetry`
So in this patch only the behavior in the greasepencil Build modifier UI
is changed, since I think it is quite obvious that one would more often
use the decorator for animating the factor value than for animating the
checkbox.
Maniphest Tasks: T87263
Differential Revision: https://developer.blender.org/D10910
This was added in 37b82a2d26, doesn't have much purpose and doesn't even do
anything in the vast majority of cases. It only affects custom properties. So
at the very least it shouldn't be shown for regular RNA property buttons. But
even for cases where it may do something, we couldn't find a good use-case. If
this operator has use-cases with some add-ons, the add-ons can expose it
differently, e.g. with a little 'x' icon next to the button, like it's done in
the keymap editor.
So removing the context menu entry now. Should this turn out to be a problem,
it can be brought back but much more selectively (only where it actually does
something). Or we could combine it with "Reset to Default".
Differential Revision: https://developer.blender.org/D8727
Reviewed by: Brecht Van Lommel, Hans Goudey
This patch fixes the issue in T86463 that colored collection icons in
the collection search box don't scale according to the zoom level.
The issue was caused by the drawing function for the colored
collection icons not allowing to change the size of the icons.
This patch addresses that by scaling the icon based on the drawing
width.
Reviewed By: #user_interface, natecraddock, Severin
Differential Revision: https://developer.blender.org/D10708
The default insert link callback for nodes was trying to move the
existing link away, since it didn't properly handle multi-input sockets
(though the problem wasn't exposed for the join node). We can basically
skip all of this "moving existing links" for multi-input sockets, unless
we are at the link limit.
This commit adds a simple node to output the min and max of an
axis-aligned bounding box for the input geometry, as well a rectangular
prism mesh created from these values for convenience.
The initial use case for this node is a "bounding box boolean", where
doing the boolean with just a bounding box could be signigicantly
faster, for cases like cutting a hole in a wall for a window. But it's
easy to imagine other cases where it could be useful.
This node supports mesh and point cloud data right now, volume support
will come as a separate patch. Also note that there is plenty of room
to improve the performance of this node through parallelization.
Differential Revision: https://developer.blender.org/D10420
Caused by typo in {rB76689e851700}.
Since Palettes and bGPDpalette are not the same size, this would not
only cause a crash in versioning code, but could only go downhill from
here on.
Maniphest Tasks: T87236
Differential Revision: https://developer.blender.org/D10903
The `InputAngle` function uses a flawed algorithm to fix precision issues.
This commit refactor the logic of that function by using BLI utilities.
Differential Revision: https://developer.blender.org/D10880
For debugging purposes to convert the internal state of the
NodeOperationBuilder to a graphviz.
Usage:
std::cout << *this << "\n";
Inside any method of the NodeOperationBuilder.
For curves, we need to tag the curve ID_RECALC_COPY_ON_WRITE for batch
cache update (same as in {rB24b2fe50f3ec}).
Maniphest Tasks: T86932
Differential Revision: https://developer.blender.org/D10826
Tweaking e.g. a field strength would then not use the curve/surface
normal anymore [but the object center instead].
If a curve has a forcefield with effector shape Curve (in code its shape
is PFIELD_SHAPE_SURFACE then), it wil get a SurfaceModifier.
Changing properties will free the SurfaceModifierData's bvhtree and mesh
And these dont get copied along when doing the CoW copy, these are
explicitly set to NULL. So this was also failing for meshes, not just
curves.
Without the mesh & bvhtree though, get_effector_data() will not set the
EffectorData's normal correctly (it is closest_point_on_surface() which
does this). And without the right EffectorData's normal, the effector
will of course work unexpected.
Going in and out of editmode made this work because that goes down this
route:
- BKE_object_handle_data_update
- BKE_displist_make_curveTypes
- do_makeDispListCurveTypes
- curve_calc_modifiers_post
-- BKE_mesh_new_nomain_from_curve_displist
-- we then have our desired updated mesh from the curve
-- this will also call the SurfaceModifiers deformVerts [which - given we
have a valid mesh - will update the bvhtree properly]
Also note that _animating_ the effector actually works, (have not done
the deep dive why this works, assume the curve geometry is updated in
this case)
So, now just carefully tag the curve ID_RECALC_GEOMETRY in
rna_FieldSettings_update for this specific case.
Maniphest Tasks: T84623
Differential Revision: https://developer.blender.org/D10092
Caused by rB0f95f51361d7.
Similar to T85515, T84717, T85543 and their related fixes.
In this case, add missing shading notifier as in rB9274bd457a25.
Reviewed By: brecht, lichtwerk
Maniphest Tasks: T86175
Differential Revision: https://developer.blender.org/D10604
Selecting random percentage would not reliably guarantee the precise
percentage of selected elements now randomize an index array instead
and use the precise number of elements from this array.
Note that this change has only been made to edit-mesh
and should be applied to all random selection operators.
Reading Area.type & ui_type printed an error from `pyrna_enum_to_py`
and returned an empty string.
As empty is a valid value, include it in the property enum list.
For Cycles, when enabling the Persistent Data option, the full render data
will be preserved from frame-to-frame in animation renders and between
re-renders of the scene. This means that any modifier evaluation, BVH
building, OpenGL vertex buffer uploads, etc, can be done only once for
unchanged objects. This comes at an increased memory cost.
Previously there option was named Persistent Images and had a more limited
impact on render time and memory.
When using multiple view layers, only data from a single view layer is
preserved to keep memory usage somewhat under control. However objects
shared between view layers are preserved, and so this can speedup such
renders as well, even single frame renders.
For Eevee and Workbench this option is not available, however these engines
will now always reuse the depsgraph for animation and multiple view layers.
This can significantly speed up rendering.
These engines do not support sharing the depsgraph between re-renders, due
to technical issues regarding OpenGL contexts. Support for this could be added
if those are solved, see the code comments for details.
* Move out of Simplify panel, into Light Paths > Fast Global Illumination
* Add separate boolan setting to enable/disable it separate from Simplify
* Default AO bounces to 1
* Put ambient occlusion distance in this panel as well
Since you can already specify a separate size for X and Y with the
grid node, it makes sense to be able to specify the size separately
for each axis also.
This also avoids some awkward math with a Transform node afterwards
when you want a specific size for each direction.
Versioning (except for animation and drivers) is handled in this commit.
Differential Revision: https://developer.blender.org/D10834
Materials used in grease pencil modifiers have the requirement that they
are already used on the object. In the UI dropdown, this restriction is
ensured by calling uiItemPointerR with appropriate searchptr and
searchpropname, so only giving the user the choice of materials already
used on the object.
From python though, it was still possible to assign materials outside of
this this restriction. This led to reports like T86981 [which have been
partially solved by clamping the material index in the modifier code to
be in the valid range].
Now make sure we dont assign "invalid" materials through RNA by
appropriate RNA pointer functions.
This also adds a proper warning (red, alert) in case of the LineArt
modifier if such a invalid material is still in the file [same as other
modifiers already do].
Differential Revision: https://developer.blender.org/D10873
This resulted in bad motion blur from alembic animation when imported
after rB83980506957c (because it was now OFF by default).
When imported in a version prior to rB83980506957c and saved, this was
still working fine.
Vertex interpolation option introduced in rBbab2260b59c7 was defaulting
to ON (correct) in that commit, but was lost in rB83980506957c.
Now switch this to ON by default again.
Note: if you have a file that was (incorrectly) imported with a version
after rB83980506957c you'll have to enable Vertex Interpolation option
on every MeshSequenceCache modifier by hand.
Maniphest Tasks: T86654
Differential Revision: https://developer.blender.org/D10876
Since these nodes are usually used for more basic operations and the
attribute nodes are used when more complexity is necessary, it makes
sense to give these nodes more accessible defaults-- hopefully this can
make learning about the core concepts of geometry nodes a bit easier.
