Actually we only have a Python API that allows to change the max jumps value.
The patch also allows non programmers to change the maximum numbers of jumps.
Reviewers: panzergame, sybren, campbellbarton, lordloki, moguri, agoose77
Reviewed By: lordloki, moguri
Projects: #game_engine
Differential Revision: https://developer.blender.org/D1302
The generic tangent calculation relied on CDDM arrays which aren't available in edit-mode.
Add a tangent calculation callback, which has its own implementation for editmesh data.
Notes:
* Code in rendering and in game engine will still convert
tangents to a tessface representation. Added code that
takes care of tangent layer only, might be removed
when BGE and rendering goes full mlooptri mode.
* Baking should work discovered some dead code while
I was working on the patch, also tangents are broken
when baking from multires (also in master), but those
are separate issues that can be fixed later.
This should fix T45491 as well
This is essential for video projection, and the alternative until now was to manually change the projection matrix via Python.
( http://www.blender.org/manual/game_engine/camera/introduction.html#camera-lens-shift
- this page will be removed as soon as I commit this)
Also this is working for perspective and orto cameras BUT if the sensor is not AUTO it will only look correct in blenderplayer (this is an unrelated bug, but just in case someone runs into it while testing this, now you know why you got the issue).
Kudos for the BlenderVR project for supporting this feature development.
Differential Revision: https://developer.blender.org/D1379
Angular velocity clamping was missing from the BGE. It is implemented
similarly to the linear velocity clamping. It is needed to be able to
drive physical simulations of systems that have a limited rotational
speed.
Reviewed by: campbellbarton, panzergame, ton
Differential Revision: https://developer.blender.org/D1365
As material is not NULL at this stage there is no need to do a NULL
check. Also to remove dead code
Reviewers: dfelinto, panzergame, hg1, moguri
Reviewed By: panzergame, hg1, moguri
Projects: #game_engine
Differential Revision: https://developer.blender.org/D1330
A Python API for the collision group / mask has been added:
```
KX_GameObject.collisionGroup
KX_GameObject.collisionMask
```
The maximum number of collision groups and masked has been increased from eight to sixteen.
This means that the max value of collisionGroup/Mask is (2 ** 16) - 1
EndObject will now activate objects that were sleeping and colliding with the removed object.
This means that, unlike now, if a rigid body starts sleeping on top of another object, when the latter is removed the rigid body will activate and fall, rather than float midair as before.
Collision groups that do not intersect used to collide on the first frame. Now this has been fixed so that they collide appropriately.
Thanks to agoose77 for his help.
Reviewers: scorpion81, hg1, agoose77, sergof
Reviewed By: agoose77, sergof
Subscribers: sergof, moguri
Projects: #game_physics, #game_engine
Differential Revision: https://developer.blender.org/D1243
This patch will remove the BlenderWorldInfo and move the source into KX_WorldInfo.
Reviewers: brecht, moguri
Reviewed By: brecht, moguri
Differential Revision: https://developer.blender.org/D156
This patch will fix the color management for the mist and global ambient color.
It will remove the old "Color Management" switch in the BGE "Render > Shading" panel and will use the "Display Device" setting in the "Scene > Color Management" panel instead.
Reviewers: moguri, brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D154
This change introduces a new hysteresis parameter that it will be added
or subtracted to/from the LOD distance to avoid popping when a LOD
object moves close to the LOD transition continuously.
Then, we have the following:
- a new LOD Hysteresis setting per scene (default 10%) which is located
in Scene context --> Level of Detail panel. This scene parameter also
will active/deactive the scene hysteresis.
- and a new LOD Hysteresis setting per object (default 10%) which is
located in Object context --> Levels of Detail panel. The LOD hysteresis
setting per object (if active) will overwrite the hysteresis setting per
scene value.
For the new blends: the hysteresis setting per scene would be active by
default and the per object would be inactive by default.
For the old blends: both hysteresis settings (per scene and per object)
would be inactive by default. A quick way to take advantage of this
feature for old blends would be to activate the hysteresis parameter in
the scene context -> Level of Detail panel
Reviewers: campbellbarton, kupoman, moguri
Reviewed By: kupoman, moguri
Subscribers: nonamejuju, lordodin
Differential Revision: https://developer.blender.org/D957
This patch will add a physics constraints replication for group instances
(dupli group).
It also fix crashing when when a group instance is made from a linked
group instance and both are on the active layer.
Initial patch T31443 from moerdn (Martin Sell).
Reviewers: lordloki, sergof, moguri, sybren
Reviewed By: moguri, sybren
Differential Revision: https://developer.blender.org/D658
Also refactor:
- Material property UI related to shadows
- Preparation of OR-ed mode flags (ma->mode_l) of render materials
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D313
These were used in BL_CreatePhysicsObjectNew() in the converter. However, all
of the data put into KX_ObjectProperties was then copied again in
KX_ConvertBulletObject(). So, instead KX_ConvertBulletObject() now gathers the
information it needs itself, which avoid this odd double conversion step for
physics.
As a side-effect, the old code would result in static non-mesh objects with no bounds
set to still have triangle mesh bounds. This would result in no bounds for these objects.
If a bounds was set that required a mesh, non-mesh objects would become sphere bounds.
This is now true regardless of whether user bounds were set. In other words, static
non-mesh objects now use sphere bounds by default instead of mesh bounds. This might
slightly alter some games, but these objects should generally be set to No Collision
anyways.
There was some deadlock due to trying manage Python's GIL. Instead of
continuing to fight with it, anything needing to call into Python while
conversion during lib loading is just delayed until it can be done in
the main thread.
This required BL_ArmatureObject to have tighter control over armatures and poses.
Also, (Blender) armature objects are now copied instead of shared between
BL_ArmatureObjects to avoid race conditions. Also, due to the armature copy,
shape key drivers need a bit of extra fiddling to get the correct armature copy.
Initially OpenMP was used for threading, but then BLI_task was used due to being
less compiler dependent.
This commit also places time spent on skinning updates in the Animation
profiler category (was previously under the Rasterizer category).
The ultimate goal is to only allow the rasterizer to handle OpenGL and bf_gpu
calls. This commit creates a RAS_ILightObject interface and a RAS_OpenGLLight
implementation.
These types of meshes do not use material caching, and thus only the first created
material would be saved, but subsequent ones were not. Those subsequent materials
were then not being freed. Now we make sure to track all of the materials.
Note: Meshes that cannot make use of material caching (no materials or using face textures)
can still use up a large amount of RAM since a material is created per face.
The "Cast Shadows" worked as expected, but it can cause problem in some cases.
For example, when using strand render, we need disabling only buffer shadows,
but the previous changes made that impossible. "Cast Shadows" should be added
as a newly created option.
Since threaded object update we've disabled in-place
curve evaluation (in cases when applying curve modifier
with target curve non-evaluated yet).
This requires game engine to take care of DAG and object
evaluation (currently it's designed to export only objects
it able to render).
This workaround will make sure that curve_cache for curves
is up-to-date.
This allows us to make materials that don't cast ray shadows.
Turning off this property can reduce the rendering time slightly.
Note: RNA path is changed to "use_cast_shadows" as well. The older
path "use_cast_buffer_shadows" still can be used as its alias, but
it will be removed after updating some addons.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D272
Levels of detail can be added and modified in the object panel. The object
panel also contains new tools for generating levels of detail, setting up
levels of detail based on object names (useful for importing), and
clearing an object's level of detail settings. This is meant as a game
engine feature, though the level of details settings can be previewed in
the viewport.
Reviewed By: moguri, nexyon, brecht
Differential Revision: http://developer.blender.org/D109
This is a squashed commit of the following:
BGE Physics Cleanup: Fix crashes with LibLoading and replication. Also fixing some memory leaks.
BGE Physics Cleanup: Removing KX_IPhysicsController and KX_BulletPhysicsController.
BGE Physics Cleanup: Moving the replication code outside of KX_BlenderBulletController and switching KX_ConvertPhysicsObjects to create a CcdPhysicsController instead of a KX_BlenderBulletController.
BGE Physics Cleanup: Getting rid of an unsued KX_BulletPhysicsController.h include in KX_Scene.cpp.
BGE Physics Cleanup: Removing unused KX_IPhysicsController and KX_BulletPhysicsController includes.
BGE Physics Cleanup: Removing m_pPhysicsController1 and GetPhysicsController1() from KX_GameObject.
BGE Physics Cleanup: Remove SetRigidBody() from KX_IPhysicsController and remove GetName() from CcdPhysicsController.
BGE Physics Cleanup: Moving Add/RemoveCompoundChild() from KX_IPhysicsController to PHY_IPhysicsController.
BGE Physics Cleanup: Removing GetLocalInertia() from KX_IPhysicsController.
BGE Physics Cleanup: Making BlenderBulletCharacterController derive from PHY_ICharacter and removing CharacterWrapper from CcdPhysicsEnvironment.cpp. Also removing the character functions from KX_IPhysicsController.
BGE Physics Cleanup: Removing GetOrientation(), SetOrientation(), SetPosition(), SetScaling(), and GetRadius() from KX_IPhysicsController.
BGE Physics Cleanup: Removing GetReactionForce() since all implementations returned (0, 0, 0). The Python interface for KX_GameObject still has reaction force code, but it still also returns (0, 0, 0). This can probably be removed as well, but removing it can break scripts, so I'll leave it for now.
BGE Physics Cleanup: Removing Get/SetLinVelocityMin() and Get/SetLinVelocityMax() from KX_IPhysicsController.
BGE Physics Cleanup: Removing SetMargin(), RelativeTranslate(), and RelativeRotate() from KX_IPhysicsController.
BGE Physics Cleanup: Using constant references for function arguments in PHY_IPhysicsController where appropriate.
BGE Physics Cleanup: Removing ApplyImpulse() from KX_IPhysicsController.
BGE Physics Cleanup: Removing ResolveCombinedVelocities() from KX_IPhysicsController.
BGE Physics Cleanup: Accidently removed a return when cleaning up KX_GameObject::PyGetVelocity().
BGE Physics Cleanup: Remove GetLinearVelocity(), GetAngularVelocity() and GetVelocity() from KX_IPhysicsController. The corresponding PHY_IPhysicsController functions now also take Moto types instead of scalars to match the KX_IPhysicsController interface.
BGE Physics Cleanup: Moving SuspendDynamics, RestoreDynamics, SetMass, GetMass, and SetTransform from KX_IPhysicsController to PHY_IPhysicsController.
BGE Physics Cleanup: PHY_IPhysicsEnvironment and derived classes now use the same naming scheme as PHY_IController.
BGE Physics Cleanup: PHY_IMotionState and derived classes now use the same naming convention as PHY_IController.
BGE Phsyics Cleanup: Making PHY_IController and its derived classes follow a consistent naming scheme for member functions. They now all start with capital letters (e.g., setWorldOrientation becomes SetWorldOrientation).
BGE Physics Cleanup: Getting rid of KX_GameObject::SuspendDynamics() and KX_GameObject::RestoreDynamics(). Instead, use the functions from the physics controller.
BGE: Some first steps in trying to cleanup the KX_IPhysicsController mess. KX_GameObject now has a GetPhysicsController() and a GetPhysicsController1(). The former returns a PHY_IPhysicsController* while the latter returns a KX_IPhysicsController. The goal is to get everything using GetPhysicsController() instead of GetPhysicsController1().
