Some code delt with panel merging in earlier versions of Blender,
which is no longer needed. Other code delt with controls that aren't
used anymore, and in some cases have region-level equivalents.
There's a surprising amount of this unused code in this file, so removing it
will be helpful for the future.
Differential Revision: https://developer.blender.org/D7938
I spotted a duplicate struct declaration, so I had to check for other duplicated as well
There might be some other but i am not confident enough for deleting them
this regex search for duplicate ^(.*;)$\n(\1)$
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D8146
The shortcuts act on the modifier with its panel under the mouse.
The following shortcuts are enabled by default:
- Remove modifier: X, Delete
- Apply modifier: Ctrl A
- Duplicate modifier: Shift D
More shortcuts can be added in the keymap.
Each panel can now store a custom data RNA pointer, and a new
function is added to get the custom data for the panel under the
cursor. This custom data could be used to refactor the "List Panel
System" to generalize it and integrate it further with RNA.
The same functionality will be added in further commits where it
applies to constraints, grease pencil modifiers, and effects.
Differential Revision: https://developer.blender.org/D8031
This patch implements the list panel system D7490 for grease pencil
shader effects. It also moves their drawing to a callback in
ShaderFxTypeInfo in line with the extensible architecture refactoring
goal T75724.
The implementation is basically exactly the same as for the modifier
patch (9b099c8612).
Thanks to Matias Mendiola (@mendio) for helping to develop the layout
changes.
Differential Revision: https://developer.blender.org/D7985
This patch implements the list panel system D7490 for grease pencil
modifiers. It also moves their drawing to a callback in
GpencilModifierTypeInfo in line with the extensible architecture
refactoring goal T75724.
This also adds the "set_error" function for grease pencil modifiers,
which hadn't been copied from mesh modifiers yet.
The implementation is basically exactly the same as for the modifier
patch (9b099c8612).
Thanks to Matias Mendiola (mendio) for providing mockups for many
of the layout changes.
Differential Revision: https://developer.blender.org/D7978
This patch implements the list panel system D7490 for constraints.
In this case the panels are still defined in Python.
The layouts are also updated to use subpanels and the a more organized
single column layout. There may be more tweaks necessary for the
layouts.
Reviewed By: Severin, billreynish, Mets
Differential Revision: https://developer.blender.org/D7499
This patch implements the list panel system D7490 for modifiers.
It also moves modifier drawing to a callback in ModifierTypeInfo
in line with the extensible architecture refactoring goal T75724.
This adds a PanelRegister callback and utilities for registering
panels and subpanels. It also adds the callbacks for expansion saving
and drag and drop reordering described in D7490.
These utilities, callbacks, and other common UI elements shared
between modifiers live in MOD_ui_common.c.
Because modifier buttons are now in panels, we can make use of
subpanels for organization. The UI layouts also use the single
column layout style consistently used elsewhere in Blender.
Additionally, the mode-setting buttons are aligned and ordered
consistently with the outliner.
However, the large number of UI changes in this patch may mean
that additional polishing is required in master.
Thanks to William Reynish (@billreynish) who did a fair amount of the
layout work and to Julian Eisel (@Severin) for consistent help.
Differential Revision: https://developer.blender.org/D7498
- uiTemplateID: Straightforward, just const for the template
and the functions it calls
- uiTemplateCacheFile: Create a function in rna_ui.c because
the generated RNA callback doesn't have const context.
Differential Revision: https://developer.blender.org/D7895
This implements a general system to implement drag and drop, subpanels,
and UI animation for the stack UIs in Blender. There are NO functional
changes in this patch, but it makes it relatively trivial to implement
these features for stacks.
The biggest complication to using panels to implement the UI for lists
is that there can be multiple modifiers of the same type. Currently there
is an assumed 1 to 1 relationship between every panel and its type, but
there can be multiple list items of the same type, so we have to break
this relationship. The mapping between panels and their data is stored
with an index in the panel's runtime struct.
To make use the system for a list like modifiers, four components
must be added:
1. A panel type defined and registered for each list data type, with a
known mapping between list data types and panel idnames.
1. A function called by interface code to build the add the panel
layouts with the provided helper functions.
- UI_panel_list_matches_data will check if the panel list needs to
be rebuilt.
- UI_panels_free_instanced will remove the existing list panels
- UI_panel_add_instanced adds a list panel of a given type.
3. An expand flag for the list data and implementations of
get_list_data_expand_flag and set_list_data_expand_flag.
4. For reordering, the panel type's reorder callback. This is called
when the instanced panels are drag-dropped. This requires
implementing a "move to index" operator for the list data.
Reviewed By: Severin, brecht
Differential Revision: https://developer.blender.org/D7490
Pressing 'E' over a number button to pick a distance was keeping
left-right arrows instead of using the eye-dropper cursor.
Workaround this by clearing the active button before setting the cursor.
In this case giving `CTX_wm_menu()` priority over `CTX_wm_region()` is all
that's needed and makes sense (since we want exactly the hovered button, not
some other active button in the region/menu hierarchy).
The situation with pop-ups is still tricky, see T73565. But as a first step
it's probably good to let functions be more explicit about what they want when
querying UI context. So I added a variation of a UI-context function for cases
like this.
Adds a wrapper-struct to create and return the three layouts required
for the propery split layout (i.e. `UILayout.use_property_split`). This
gives more flexibility for special treatment.
E.g. needed for adding the arrow icon buttons when there is a hierarchy
of nodes to be represented in the material properties (needs inserting
in the text column to not offset the split layout).
This commit also makes use of the utility for
`uiItemL_respect_property_split()`.
Usually items without labels don't use the property split layout and
just use the full layout width. In some cases that is not wanted because
it looks odd if single items within the split layout use the full width.
The option is unused but would be needed for adding decorators to the
material properties.
Makes the following layout changes possible:
{F8473498} {F8473499} {F8473502}
The next commit will contain many layout changes to make good use of
these new possibilities. The result should be more consistent, easier to
read and should give a more organized impression. Additionally, it
should be possible to replace many sub-panels with compacter layouts.
Main changes:
* Checkboxes now respect the property split layouts
* Add support for row and column headers (i.e.
`uiLayout.column(heading="Foo")`, `uiLayout.row(heading="Bar")`). If the
first property added to this layout doesn't insert anything into the label
split column, the heading is inserted there. Otherwise, it's inserted as own
item.
* Add support for manually inserting decorators for an existing item
(`uiLayout.prop_decorator()`). That way layout creators can manually insert
this, which was the only way I saw to support property split layouts with a
checkbox before the actual property. {F8471883}
* Autogenerated layouts for operator properties look bad if there are only
checkboxes (which only use half the region width). So before creating the
layout, we iterate over visible properties and disable split layout if all
are booleans. I think this is fine, if needed we could also add layout hints
to operators.
* `uiTemplateOperatorPropertyButs()` now handles macros itself, the caller
used to be responsible for this. Code that didn't handle these so far never
used macros I think, so this change should be invisible.
* Remove manual property split layout from autogenerated operator properties
layout.
* Padding of checkboxes is tweaked to make their label visually more connected
to the checkboxes.
* Support split layout for menus (should work for `uiLayout.menu()`,
`.operator_menu_enum()`, `.prop_menu_enum()`, maybe more)
Maniphest Task: https://developer.blender.org/T65965
Differential Revision: https://developer.blender.org/D7427
Reviewed by: Brecht Van Lommel, William Reynish, Pablo Vazques
For buttons representing node inputs (e.g. in the material properties)
rather than drawing some generic socket icon, the actual sockets are
drawn now. That includes color, shape and the selection outline.
This should make it easier to understand what these buttons relate to.
Screenshots: {F8469252}, {F8469248} (The left alignment will be done in
a follow-up commit.)
Differential Revision: https://developer.blender.org/D7409
Reviewed by: Brecht Van Lommel, Clément Foucault, William Reynish
- Show dimmed text for the menu entries leading up to the menu item.
- Show icons between the menu text and menu item.
- Use unicode right pointing triangle instead of arrow.
Follow up of b2ee1770d4 and 10c2254d41, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
This has some advantages over operator search:
- Some operators need options set to be usefully accessed.
- Shows key bindings to access menus
(for actions that don't have key bindings themselves).
- Non operator actions such as check-boxes are also shown.
- Menu items can control execution context, using invoke or execute
where appropriate so we can control how the operator runs.
Part of the design task T74157.
This can be tested using the 'Experimental' preferences section
or selected in the key-map editor.
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
Part of https://developer.blender.org/T74429.
There's a chance that this causes some issues becaue in some cases we
change from getting the window from context to getting it from somewhere
else.
Panel alignment was only updated when panel size changed. Now we can
also recognize changes in the category tabs offset and tag panels
for alignment updates.
Adds a `text` parameter to `bpy.types.uiLayout.template_ID()` which
causes a label to be added, as usual. Adding the label also makes the
template respect the `bpy.types.uiLayout.use_property_split` option.
Also fixes wrong layout being used in the template-ID, although I think
that didn't cause issues in practice.
Sergey requested this for usage in the Movie Clip Editor.
Custom profiles in bevel allows the profile curve to be controlled by
manually placed control points. Orientation is regularized along
groups of edges, and the 'pipe case' is updated. This commit includes
many updates to comments and changed variable names as well.
A 'cutoff' vertex mesh method is added to bevel in addition to the
existing grid fill option for replacing vertices.
The UI of the bevel modifier and tool are updated and unified.
Also, a 'CurveProfile' widget is added to BKE for defining the profile
in the interface, which may be useful in other situations.
Many thanks to Howard, my mentor for this GSoC project.
Reviewers: howardt, campbellbarton
Differential Revision: https://developer.blender.org/D5516
This is useful for drawing keymap items into the header or status bar
While these icons are available directly,
mapping them from the keymap item isn't trivial.
