The idea is to make include statements more explicit and obvious where the
file is coming from, additionally reducing chance of wrong header being
picked up.
For example, it was not obvious whether bvh.h was refferring to builder
or traversal, whenter node.h is a generic graph node or a shader node
and cases like that.
Surely this might look obvious for the active developers, but after some
time of not touching the code it becomes less obvious where file is coming
from.
This was briefly mentioned in T50824 and seems @brecht is fine with such
explicitness, but need to agree with all active developers before committing
this.
Please note that this patch is lacking changes related on GPU/OpenCL
support. This will be solved if/when we all agree this is a good idea to move
forward.
Reviewers: brecht, lukasstockner97, maiself, nirved, dingto, juicyfruit, swerner
Reviewed By: lukasstockner97, maiself, nirved, dingto
Subscribers: brecht
Differential Revision: https://developer.blender.org/D2586
By calculating the size of the state buffer in the kernel rather than the host
less code is needed and the size actually reflects the requested features.
Will also be a little faster in some cases because of larger global work size.
This is to help debug and track memory usage for generic buffers. We
have similar for textures already since those require a name, but for
buffers the name is only for debugging proposes.
The Progress system in Cycles had two limitations so far:
- It just counted tiles, but ignored their size. For example, when rendering a 600x500 image with 512x512 tiles, the right 88x500 tile would count for 50% of the progress, although it only covers 15% of the image.
- Scene update time was incorrectly counted as rendering time - therefore, the remaining time started very long and gradually decreased.
This patch fixes both problems:
First of all, the Progress now has a function to ignore time spans, and that is used to ignore scene update time.
The larger change is the tile size: Instead of counting samples per tile, so that the final value is num_samples*num_tiles, the code now counts every sample for every pixel, so that the final value is num_samples*num_pixels.
Along with that, some unused variables were removed from the Progress and Session classes.
Reviewers: brecht, sergey, #cycles
Subscribers: brecht, candreacchio, sergey
Differential Revision: https://developer.blender.org/D2214
Previously, it was only possible to choose a single GPU or all of that type (CUDA or OpenCL).
Now, a toggle button is displayed for every device.
These settings are tied to the PCI Bus ID of the devices, so they're consistent across hardware addition and removal (but not when swapping/moving cards).
From the code perspective, the more important change is that now, the compute device properties are stored in the Addon preferences of the Cycles addon, instead of directly in the User Preferences.
This allows for a cleaner implementation, removing the Cycles C API functions that were called by the RNA code to specify the enum items.
Note that this change is neither backwards- nor forwards-compatible, but since it's only a User Preference no existing files are broken.
Reviewers: #cycles, brecht
Reviewed By: #cycles, brecht
Subscribers: brecht, juicyfruit, mib2berlin, Blendify
Differential Revision: https://developer.blender.org/D2338
Basically just moves cached kernels from ~/.config/blender/BLENDER_VERSION to
~/.cache/cycles/kernels. This has following benefits:
- Follows XDG specification more closely,
not as if it's totally crucial or measurable by users, but still nice.
- Prevents unexpected sizes of config folder, makes disk space used in more
predictable for users way.
- Allows to share kernels across multiple Blender versions,
which makes it easier debugging at the times close to release.
- "Copy Previous Settings" operator will no longer be copying possibly
gigabytes of cached kernels, which used to lead to really nast disk usage
and annoying delays of copying settings.
- In the future we can have some smart logic to clear old unused cached
kernels.
Currently only done for Linux and OSX. Windows still follows old "cache"
folder logic, but it's not really important for now because we don't
support kernel compilation on this platform yet.
Reviewers: dingto, juicyfruit, brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2197
This way we can easily switch between toolkits without worrying
whether some kernel was compiled with old or new CUDA toolkit.
It's also now possible to switch machine architecture and have
proper cached kernel detected. Not as if it happens every day,
but i did such a bitness switch back in the days :)
All the changes are mainly giving explicit tips on inlining functions,
so they match how inlining worked with previous toolkit.
This make kernel compiled by CUDA 8 render in average with same speed
as previous kernels. Some scenes are somewhat faster, some of them are
somewhat slower. But slowdown is within 1% so far.
On a positive side it allows us to enable newer generation cards on
buildbots (so GTX 10x0 will be officially supported soon).
Some of these values can get quite large and are hard to read, adding this
makes it easy to read them at a glance.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D2039
This adds support for CUDA Texture objects (also known as Bindless textures) for Kepler GPUs (Geforce 6xx and above).
This is used for all 2D/3D textures, data still uses arrays as before.
User benefits:
* No more limits of image textures on Kepler.
We had 5 float4 and 145 byte4 slots there before, now we have 1024 float4 and 1024 byte4.
This can be extended further if we need to (just change the define).
* Single channel textures slots (byte and float) are now supported on Kepler as well (1024 slots for each type).
ToDo / Issues:
* 3D textures don't work yet, at least don't show up during render. I have no idea whats wrong yet.
* Dynamically allocate bindless_mapping array?
I hope Fermi still works fine, but that should be tested on a Fermi card before pushing to master.
Part of my GSoC 2016.
Reviewers: sergey, #cycles, brecht
Subscribers: swerner, jtheninja, brecht, sergey
Differential Revision: https://developer.blender.org/D1999
If the CUDA Toolkit is installed and the user is on Linux,
adaptive, feature based CUDA runtime compile is now possible to enable via:
* Environment flag CYCLES_CUDA_ADAPTIVE_COMPILE or
* Debug menu (Debug value 256) in the Cycles UI.
This was a hard decision, because going newer CUDA toolkit makes
rendering up to 5% slower. But on another hand, it solves major
speed regressions (up to 30%) with branched path tracing on a
top level cards.
Neither of those regressions have a meaningful and sane workaround
from the code itself.
Toolkit 6.5 could still be used, but it's no longer recommended one.
Supports both smoke/fire and point density textures now.
Reduces number of textures available for sm_20 and sm_21, but you have
to compromise somewhere on such a limited hardware.
Currently limited to linear interpolation only, and decoupled ray
marching is not supported yet. Think those could be considered just a
further improvement.
Some quick example:
https://developer.blender.org/F282934
Code is minimal and we can fully consider it a fix for missing
support of 3D textures with CUDA.
Reviewers: lukasstockner97, brecht, juicyfruit, dingto
Reviewed By: brecht, juicyfruit, dingto
Subscribers: mib2berlin
Differential Revision: https://developer.blender.org/D1806
Basically the idea is to make code robust against extending
enum options in the future by falling back to a known safe
default setting when RNA is set to something unknown.
While this approach solves the issues similar to T47377,
but it wouldn't really help when/if any of the RNA values
gets ever deprecated and removed. There'll be no simple
solution to that apart from defining explicit mapping from
RNA value to Cycles one.
Another part which isn't so great actually is that we now
have to have some enum guards and give some explicit values
to the enum items, but we can live with that perhaps.
Reviewers: dingto, juicyfruit, lukasstockner97, brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D1785
This commit removes the experimental CUDA kernel, making SSS and CMJ
regular features.
Several improvements have been made in the past few
weeks (thanks Sergey!) which make SSS render several times faster (2-3x
compared to 2.76b) on the GPU, and the increased VRAM usage has also been
fixed. Therefore the experimental kernel is no longer needed.
Differential Revision: https://developer.blender.org/D1726
Manual has been updated: too:
https://www.blender.org/manual/render/cycles/features.html
The main purpose of such linking is to make Blender compatible with
NVidia's debuggers and profilers which are doing some LD_PRELOAD
magic to intercept some function calls. Such magic conflicts with
our CUDA wrangler magic and causes segmentation faults.
The option is disabled by default, so there's no affect on any of
artists.
In order to make Blender linked directly against CUDA library use
the WITH_CUDA_DYNLOAD CMake option (it's marked as advanced).
This makes it possible to move some parts of evaluation from host to the device
and hopefully reduce memory usage by avoid having full RGBA buffer on the host.
Reviewers: juicyfruit, lukasstockner97, brecht
Reviewed By: lukasstockner97, brecht
Differential Revision: https://developer.blender.org/D1702
Maybe this is pedantic but I read it’s best to explicitly set the
desired component size.
Also append “_ARB” to float texture formats since those need an
extension in GL 2.1.
