This node creates splines with more control points in between the
existing control points. The point is to give the splines more
definition for further tweaking like randomization with white noise,
instead of deforming a resampled poly spline with a noise texture.
For poly splines and NURBS, the node simply interpolates new values
between the existing control points. However, for Bezier splines,
the result follows the existing evaluated shape of the curve, changing
the handle positions and handle types to make that possible.
The number of "cuts" can be controlled by an integer input, or an
attribute can be used. Both spline and point domain attributes are
supported, so the number of cuts can vary using the value from the
point at the start of each segment.
Dynamic curve attributes are interpolated to the result with linear
interpolation.
Differential Revision: https://developer.blender.org/D11421
Colors are often thought of as being 4 values that make up that can make any color.
But that is of course too limited. In C we didn’t spend time to annotate what we meant
when using colors.
Recently `BLI_color.hh` was made to facilitate color structures in CPP. CPP has possibilities to
enforce annotating structures during compilation and can adds conversions between them using
function overloading and explicit constructors.
The storage structs can hold 4 channels (r, g, b and a).
Usage:
Convert a theme byte color to a linearrgb premultiplied.
```
ColorTheme4b theme_color;
ColorSceneLinear4f<eAlpha::Premultiplied> linearrgb_color =
BLI_color_convert_to_scene_linear(theme_color).premultiply_alpha();
```
The API is structured to make most use of inlining. Most notable are space
conversions done via `BLI_color_convert_to*` functions.
- Conversions between spaces (theme <=> scene linear) should always be done by
invoking the `BLI_color_convert_to*` methods.
- Encoding colors (compressing to store colors inside a less precision storage)
should be done by invoking the `encode` and `decode` methods.
- Changing alpha association should be done by invoking `premultiply_alpha` or
`unpremultiply_alpha` methods.
# Encoding.
Color encoding is used to store colors with less precision as in using `uint8_t` in
stead of `float`. This encoding is supported for `eSpace::SceneLinear`.
To make this clear to the developer the `eSpace::SceneLinearByteEncoded`
space is added.
# Precision
Colors can be stored using `uint8_t` or `float` colors. The conversion
between the two precisions are available as methods. (`to_4b` and
`to_4f`).
# Alpha conversion
Alpha conversion is only supported in SceneLinear space.
Extending:
- This file can be extended with `ColorHex/Hsl/Hsv` for different representations
of rgb based colors. `ColorHsl4f<eSpace::SceneLinear, eAlpha::Premultiplied>`
- Add non RGB spaces/storages ColorXyz.
Reviewed By: JacquesLucke, brecht
Differential Revision: https://developer.blender.org/D10978
Colors are often thought of as being 4 values that make up that can make any color.
But that is of course too limited. In C we didn’t spend time to annotate what we meant
when using colors.
Recently `BLI_color.hh` was made to facilitate color structures in CPP. CPP has possibilities to
enforce annotating structures during compilation and can adds conversions between them using
function overloading and explicit constructors.
The storage structs can hold 4 channels (r, g, b and a).
Usage:
Convert a theme byte color to a linearrgb premultiplied.
```
ColorTheme4b theme_color;
ColorSceneLinear4f<eAlpha::Premultiplied> linearrgb_color =
BLI_color_convert_to_scene_linear(theme_color).premultiply_alpha();
```
The API is structured to make most use of inlining. Most notable are space
conversions done via `BLI_color_convert_to*` functions.
- Conversions between spaces (theme <=> scene linear) should always be done by
invoking the `BLI_color_convert_to*` methods.
- Encoding colors (compressing to store colors inside a less precision storage)
should be done by invoking the `encode` and `decode` methods.
- Changing alpha association should be done by invoking `premultiply_alpha` or
`unpremultiply_alpha` methods.
# Encoding.
Color encoding is used to store colors with less precision as in using `uint8_t` in
stead of `float`. This encoding is supported for `eSpace::SceneLinear`.
To make this clear to the developer the `eSpace::SceneLinearByteEncoded`
space is added.
# Precision
Colors can be stored using `uint8_t` or `float` colors. The conversion
between the two precisions are available as methods. (`to_4b` and
`to_4f`).
# Alpha conversion
Alpha conversion is only supported in SceneLinear space.
Extending:
- This file can be extended with `ColorHex/Hsl/Hsv` for different representations
of rgb based colors. `ColorHsl4f<eSpace::SceneLinear, eAlpha::Premultiplied>`
- Add non RGB spaces/storages ColorXyz.
Reviewed By: JacquesLucke, brecht
Differential Revision: https://developer.blender.org/D10978
This is a first step towards T87620.
It should not have any functional changes.
Goals of this refactor:
* Move the evaluator out of `MOD_nodes.cc`. That makes it easier to
improve it in isolation.
* Extract core input/out parameter management out of `GeoNodeExecParams`.
Managing this is the responsibility of the evaluator. This separation of
concerns will be useful once we have lazy evaluation of certain inputs/outputs.
Differential Revision: https://developer.blender.org/D11085
Because we use virtual classes (and for other reasons), we had to do a
small allocation when simply retrieving the data type and domain of an
existing attribute. This happened quite a lot actually-- to determine
these values for result attributes.
This patch adds a simple function to retrieve this meta data without
building the virtual array. This should lower the overhead of every
attribute node, though the difference probably won't be noticible
unless a tree has very many nodes.
Differential Revision: https://developer.blender.org/D11047
A virtual array is a data structure that is similar to a normal array
in that its elements can be accessed by an index. However, a virtual
array does not have to be a contiguous array internally. Instead, its
elements can be layed out arbitrarily while element access happens
through a virtual function call. However, the virtual array data
structures are designed so that the virtual function call can be avoided
in cases where it could become a bottleneck.
Most commonly, a virtual array is backed by an actual array/span or
is a single value internally, that is the same for every index.
Besides those, there are many more specialized virtual arrays like the
ones that provides vertex positions based on the `MVert` struct or
vertex group weights.
Not all attributes used by geometry nodes are stored in simple contiguous
arrays. To provide uniform access to all kinds of attributes, the attribute
API has to provide virtual array functionality that hides the implementation
details of attributes.
Before this refactor, the attribute API provided its own virtual array
implementation as part of the `ReadAttribute` and `WriteAttribute` types.
That resulted in unnecessary code duplication with the virtual array system.
Even worse, it bound many algorithms used by geometry nodes to the specifics
of the attribute API, even though they could also use different data sources
(such as data from sockets, default values, later results of expressions, ...).
This refactor removes the `ReadAttribute` and `WriteAttribute` types and
replaces them with `GVArray` and `GVMutableArray` respectively. The `GV`
stands for "generic virtual". The "generic" means that the data type contained
in those virtual arrays is only known at run-time. There are the corresponding
statically typed types `VArray<T>` and `VMutableArray<T>` as well.
No regressions are expected from this refactor. It does come with one
improvement for users. The attribute API can convert the data type
on write now. This is especially useful when writing to builtin attributes
like `material_index` with e.g. the Attribute Math node (which usually
just writes to float attributes, while `material_index` is an integer attribute).
Differential Revision: https://developer.blender.org/D10994
This is a complete rewrite of the derived node tree data structure.
It is a much thinner abstraction about `NodeTreeRef` than before.
This gives the user of the derived node tree more control and allows
for greater introspection capabilities (e.g. before muted nodes were
completely abstracted away; this was convenient, but came with
limitations).
Another nice benefit of the new structure is that it is much cheaper
to build, because it does not inline all nodes and sockets in nested
node groups.
Differential Revision: https://developer.blender.org/D10620
This commit exposes the strings used in the node error messages for
localization. It also changes the message tooltip creation to
automatically add the period at the end, to be more consistent with
the (arguably bad) design of other tooltips in Blender.
Calling `TIP_` directly in the node implementation files allows us to
continue using `std::string` concatenation instead of passing variadic
arguments. It's also more explicit about which part of the message is
translated and which isn't. The files already include the translation
header anyway.
An error doesn't make sense in these situations because we don't expect
to find attributes on empty geometry, and an empty geometry set is a
valid situation.
Note that we can't use `component.is_empty` here, because often the
component is visually "empty" but still has a point cloud with no
points or a mesh with no vertices.
This patch adds icons to the right side of nodes when they encounter a
a problem. When hovered, a tooltip displays describing the encountered
while evaluating the node.
Some examples are: attribute doesn't exist, mesh has no faces,
incorrect attribute type, etc. Exposing more messages to the system
will be an ongoing process. Multiple warnings per node are supported.
The system is implemented somewhat generically so that the basic
structure can also be used to store more information from evaluation
for the interface, like a list of available attributes.
Currently the messages are just button tooltips. They could be styled
differently in the future. Another limitation is that every instance of
a node group in a parent node tree will have the same error messages,
the "evaluation context" used to decide when to display the tooltips
must be extended to support node tree paths.
Differential Revision: https://developer.blender.org/D10290
Since the derived node tree is already build for the evaluation system,
it's simpler to pass a derived node to the params struct. This will also
allow context lookups in nested node groups for node error messages,
since the derived node has that information readily accessible.
Currently every attribute node assumes that the attribute exists on the
"points" domain, so it generally isn't possible to work with attributes
on other domains like edges, polygons, and corners.
This commit adds a heuristic to each attribute node to determine the
correct domain for the result attribute. In general, it works like this:
- If the output attribute already exists, use that domain.
- Otherwise, use the highest priority domain of the input attributes.
- If none of the inputs are attributes, use the default domain (points).
For the implementation I abstracted the check a bit, but in each
node has a slightly different situation, so we end up with slightly
different `get_result_domain` functions in each node. I think this makes
sense, it keeps the code flexible and more easily understandable.
Note that we might eventually want to expose a domain drop-down to some
of the nodes. But that will be a separate discussion; this commit focuses
on making a more useful choice automatically.
Differential Revision: https://developer.blender.org/D10389
This commit adds a simple utility function for getting the data type of an
attribute or its "constant" socket counterparts. No functional changes.
Differential Revision: https://developer.blender.org/D9819
This is a non-functional change. The functionality introduced in this commit
is not used in master yet. It is used by nodes that are being developed in
other branches though.
This is the initial merge from the geometry-nodes branch.
Nodes:
* Attribute Math
* Boolean
* Edge Split
* Float Compare
* Object Info
* Point Distribute
* Point Instance
* Random Attribute
* Random Float
* Subdivision Surface
* Transform
* Triangulate
It includes the initial evaluation of geometry node groups in the Geometry Nodes modifier.
Notes on the Generic attribute access API
The API adds an indirection for attribute access. That has the following benefits:
* Most code does not have to care about how an attribute is stored internally.
This is mainly necessary, because we have to deal with "legacy" attributes
such as vertex weights and attributes that are embedded into other structs
such as vertex positions.
* When reading from an attribute, we generally don't care what domain the
attribute is stored on. So we want to abstract away the interpolation that
that adapts attributes from one domain to another domain (this is not
actually implemented yet).
Other possible improvements for later iterations include:
* Actually implement interpolation between domains.
* Don't use inheritance for the different attribute types. A single class for read
access and one for write access might be enough, because we know all the ways
in which attributes are stored internally. We don't want more different internal
structures in the future. On the contrary, ideally we can consolidate the different
storage formats in the future to reduce the need for this indirection.
* Remove the need for heap allocations when creating attribute accessors.
It includes commits from:
* Dalai Felinto
* Hans Goudey
* Jacques Lucke
* Léo Depoix
