Previously the decimation would take the whole curve into account when
decimating and not just the selected part.
This also contains various smaller bug fixes for the fcurve decimation.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D6286
Add new icons and panels Grease Pencil Dopesheet to manage layers without having the properties panel visible.
Also, the icons are in the same order in Dopesheet, Layers and Material list to keep consistency.
As the number of columns for icons is limited to 3 and we also need use a factor, I have impleted the change using slider area. Also, the slider option is enabled by default for 2D Template.
See T72026 for more info.
Reviewed By: mendio, pepeland, billreynish
Differential Revision: https://developer.blender.org/D6328
Instead of having the option to show marker lines,
make the marker region optional.
- Added a Show Markers entry in the View menu of the animation editors.
- If the markers region is not active then the Marker menu gets hidden.
- Removed marker menu from the driver editor
and don't allow to use marker operators.
When introducing "drag-all-selected" support all over Blender, we
figured this wouldn't work well with the Graph Editor
selection/transform behavior.
Hence, William and I worked on the following changes, although we used
this chance to improve the behavior in general too.
For more info see T70634.
* Handles now always move with the key, regardless if they are selected
or not.
* Selecting the key doesn't select the handles anymore, their selection
is separate.
* Multiple keys and handles can now be dragged.
* Dragging a handle moves all selected handles **on the same side**.
* Tweak-dragging any handle can never affect any keyframe location,
only handles.
* G/R/S should behave as before.
* Changing the handle type with a key selected always applies the change
to both handles.
* Box selection with Ctrl+Drag now allows deselecting handles (used to
act on entire triple only).
* Box selection //Include Handles// option now only acts on visible
handles, wasn't the case with Only Selected Keyframes Handles enabled.
* Box selection //Include Handles// is now enabled by default in all
bundled keymaps.
The changes have been tested for some days by the animators here in the
Blender Animation Studio. Some changes are based on their feedback.
Also, this improves/adds comments for related code.
Differential Revision: https://developer.blender.org/D6235
Reviewed by: Sybren Stüvel, William Reynish
Users now can turn on in a viewport collections that are temporarily
hidden (eye) in the view layer.
Design task: T61327
As for the implementation, I had to decouple the visibility in the
depsgraph from the visibility in the view layer.
Also there is a "bug" that in a way was there before which is some
operators (e.g., writing a text inside of a text object, tab into edit
mode) run regardless of the visibility of the active object. The bug was
present already (with object type visibility restriction) in 2.80 so if
we decide to tackle it, can be done separately (I have a patch for it
though P1132).
Reviewed by: brecht (thank you)
Differential Revision: D5992
Part of T57918. Selecting and dragging items were conflicting actions
previously when both were using the same mouse button. This avoids the
conflict.
See 056fcdfe7bbed3 for details on behavior.
The default was changed with an initial implementation of the feature.
With the feedback from animators, having a behavior which affects curves
outside of a changing range is not convenient for professional animators
working on high quality character animation. On the other hand, automatic
smoothing is better for casual animation of object motion.
This change adds an ability to change the default via User Preferences.
Differential Revision: https://developer.blender.org/D5875
Having a constant FCurve doesn't make sense for drivers; either linear
or Bezier should be used. Since the code is already creating a Bezier
curve, I just added the flag to not look at the user preferences in this
case.
Reviewed by: angavrilov
Differential Revision: https://developer.blender.org/D5921
The 'add mode' was a `short` between -1 and 2 inclusive, and magic numbers
sprinkled throughout the code. It's now an enum with descriptive names.
No functional changes.
This change makes it so motion paths are using minimal possible
dependency graph which is sufficient to evaluate required motion
path targets.
Disclaimer: granularity is done on ID level, but it is possible
to go more granular if really needed.
Brings time down to 0.5 sec when updating motion path for the
Rain animation file used for benchmarks in the previous commits.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5874
The idea is to only update parts of motion paths which lies between
keyframes around changed frame.
The changed frames are considered to be from second previous to
second next one to work correctly with bezier handles interpolation.
Brings updates in the Rain test animation file from around 11 sec
down to 1 sec.
The compiler was warning that it assumed that
crfa - 4 < cfra is always true even though that might not
be the case due to overflow. This patch just removes
the condition that caused the assumption.
When select a layer in Dopesheet, the autolock layer was not working.
Now the Dopesheet code calls the function for autolock. Also some code cleanup to move the logic to new function.
some cases
Since rB78b56fa7d973 defining a button with 'but->a1 = 0' wasnt
automatically setting its step value to 1 in 'ui_do_but_NUM' anymore.
Instead of handling this more forgiving in 'ui_do_but_NUM', went over
the remaining cases of buttons and and defined them with a step value of
1.
Fixes T69305
Reviewed By: brecht
Maniphest Tasks: T69305
Differential Revision: https://developer.blender.org/D5631
The old layout of `PointerRNA` was confusing for historic reasons:
```
typedef struct PointerRNA {
struct {
void *data;
} id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
This patch updates it to:
```
typedef struct PointerRNA {
struct ID *owner_id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
Throughout the code base `id.data` was replaced with `owner_id`.
Furthermore, many explicit pointer type casts were added which
were implicit before. Some type casts to `ID *` were removed.
Reviewers: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D5558
This reverts commits 54fd8176d7, 4c5becb6b1 and 8f578150e.
Those kind of commits must be reviewed and approved by project owners.
That one:
* Broke Collada building by not properly updating all calls to modified
function.
* Broke *whole* ID management by not properly updating library_query.c.
And in general, I am strongly against backward ID pointers, those are
*always* a serious PITA for ID management. Sometimes they cannot be
avoided, but in general other ways to get that kind of info should be
investigated first.
NodeTree structures of materials and some other data blocks are
effectively node group data block objects that are contained inside
the parent block. Thus, direct references to them are only valid
while blender is running, and are lost on save.
Fix Copy As New Driver to create a reference that goes through
the owner data block, by adding a new runtime field to bNodeTree.
Previously there was already "draw_shape" property,
but it was doing nothing. This commit renames the
property to "display_shape". Furthermore, different
shapes like SQUARE and DIAMOND are supported now.
Currently, the shapes are drawn using the shader that also
draws keyframes. In the future we might want to separate
this.
The new shapes are not used anywhere yet, but they can
be used by addon developers and will probably be useful
when we want to support different kinds node systems later.
For example, different shapes can be used to distinguish
between data and control flow.
Differential Revision: https://developer.blender.org/D2829
It is a very common need to create drivers that set the value of
a property to the value of some other property, but it currently
requires multiple actions: Copy Data Path on the input property,
adding a driver to the output property, selecting the input ID
reference, and pasting the path.
This adds a new Copy As Driver context menu option, which creates
a complete driver in the clipboard that reads the current property,
so all that remains is to paste it to the output property. It is
also possible to paste just the new driver variable into an existing
driver to combine multiple inputs.
Reviewers: brecht, billreynish
Differential Revision: https://developer.blender.org/D5382
Use explicit boolean flag to indicate whether flush to original data
is needed or not. Makes it possible to avoid confusion on whether an
evaluated or any depsgraph can be passed to the API.
Allows to remove depsgraph from bAnimContext as well.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5379
It was used to access evaluated object and pose and was done prior
to implementation of flushing values back to original data for an
active dependency graph.
Removing the argument allows to simplify API and solve issues with
accessing missing dependency graph on redo.
We didn't include and of the newer interpolation types in the
normalization function.
Besides taking into account these newer types, we now also only evaluate
the curves when needed. If the values between the control points won't
exceed the control point values, we only use the start/end values for
our normalization
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D5365
