Justa cluster did not have enough memory to handle all Mango 4k scenes.
Option is default disabled and can be enabled in the performance panel.
- At Mind -
is straight or not (premultiplied is default).
This is useful in cases when you want to check on output of such nodes
as keying which does have straight alpha output.
Also added missing do_version code to previous compo do_versions.
makes it possible to specify an offset relative to the render resolution (so 0.5
is half the image rather than giving the number of pixels). It's a bit late but
it's a trivial change and needed for 4k mango render.
Added additional buffers - new subtree - for groupnodes.
One needs to be aware of how groupnodes should be created.
Having translate & scale nodes, with the translate inside the groupnode and the scale node outside, causes artefacts.
Both should be inside or outside the groupnode. Same holds for other distort nodes.
this patch enables the translate node to wrap around the image borders. This is especially needed if the translate node is not used to position elements on a layer but when it is used instead for seamless backgrounds like mountains or clouds that should be repeated over time (by animating the x/y values).
No trunk without docs! So here is my documentation: http://wiki.blender.org/index.php/User:Plasmasolutions/TranslateNodeExtension
The code is properly documented and should be easy to read and understand. When there are any problems or issues, please comment, I'll tackle them right away!
Greetings, Thomas Beck
* optimized determination dependant areas
* fixed some issues with scale node
There are still some issues when scaling very small values (x=0.0001)
- At Mind -
Gamma correction option was ignored by new compositor system.
Also new compositor was doing alpha premul in a wrong way. In fact,
not sure if it should do premul -- old compositor didn't do that..
This commit makes BKE_image_acquire_ibuf referencing result, which means once
some area requested for image buffer, it'll be guaranteed this buffer wouldn't
be freed by image signal.
To de-reference buffer BKE_image_release_ibuf should now always be used.
To make referencing working correct we can not rely on result of
image_get_ibuf_threadsafe called outside from thread lock. This is so because
we need to guarantee getting image buffer from list of loaded buffers and it's
referencing happens atomic. Without lock here it is possible that between call
of image_get_ibuf_threadsafe and referencing the buffer IMA_SIGNAL_FREE would
be called. Image signal handling too is blocking now to prevent such a
situation.
Threads are locking by spinlock, which are faster than mutexes. There were some
slowdown reports in the past about render slowdown when using OSX on Xeon CPU.
It shouldn't happen with spin locks, but more tests on different hardware would
be really welcome. So far can not see speed regressions on own computers.
This commit also removes BKE_image_get_ibuf, because it was not so intuitive
when get_ibuf and acquire_ibuf should be used.
Thanks to Ton and Brecht for discussion/review :)
this node allows for more control for normalization of the mapped input range.
Made during BlenderPRO 2012 - Brasilia, Brazil :)
Idea and testing: Daniel Salazar
Implementation: yours truly
Reviewed by Lukas Toenne and Sergey Sharybin
Originally issue was discovered when using stabilization and movie distortion
nodes, but in fact issue was caused by render layer node always doing nearest
interpolation. Now made it so this node will respect sampler passed to it's
executePixel function and do an interpolation.
Added two new functions to do bilinear/bicubic interpolation in float buffer
with variable number of components per element, so it could interpolate 1, 3
and 4 component vectors. This functions currently mostly duplicates the same
functions from imageprocess.c and it should actually be de-duplicated. Think
it's ok to leave a bit of time with such duplication, since functions should
be generalized one more time to support byte buffers, which could backfire on
readability.
Also removed mark as complex from stabilization node, which isn't needed sine
int fact this node is not complex.
Storing this list in the node has the advantage of requiring far fewer calls to the potentially expensive internal_connect callback. This was called on every node redraw ...
Also it will allow Cycles to properly use the internal links for muted nodes, which ensures consistent behavior. The previous method was not applicable in Cycles because transient list return values are not supported well in the RNA and particularly the C++ API implementation.
This makes it possible to create pixelized scale in the Tile compositor.
Just append the node in front of a scale node or where you want the pixelization to take place.
There were some bugs on this subject, but they used the work around to add a blur size of 0 in the place where they need the pixelization.
* Node muting in node groups didn't work.
[#32597] Mute one node in a group blocks it
It looked for connections in the main tree, and not inside the group.
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
Issue was caused by getting image from compositor node conversion code,
now it'll check whether rendering happens and if so, frame wouldn't be
stored in the cache.
This possible fixes#32465: Memory leak when rendering
calculate the distance in 3d between R,G and B, the YCC only takes Cb and Cr
into consideration.
This commit makes COM_DistanceMatteOperation inheritable and expose the calculate distance function
to be re-implemented for the YCC node operation.
Thanks Troy Sobotka for the report over email.
Patch incorporates review suggestions by Jeroen Bakker.
