Brushes themselves are still affected by the mask, but the viewport is not
showing the mask. This way it's easier to see details while sculpting.
Studio request by Julien Kaspar
This commit introduces the following changes:
* Modified the poll callback on the "Update Paths" operator for bones
so that it only checks if there are bones that have motion paths
(instead of checking whether the active bone has paths).
This makes it easier to update paths without having to first select one
that has them - useful when the paths are all on hidden/hard-to-select bones.
* Add a readonly property, "has_motion_paths" to the animviz.motion_path
RNA struct, providing easier access to the internal flag used above.
This makes it possible for the UI to display the "Update" button without
having to check various bones for motion paths.
Notes:
* The flag being used in these changes already existed, and was only really
intended for internal use. However, since it was already used in many places
for determining if auto-update of all bone paths was needed (e.g. after certain
editing ops), it should be safe to use here too.
* The update_paths operator currently bakes all paths when activated, so there's
currently no loss of functionality with changing to not checking if the active
bone has any paths (e.g. we couldn't only update the active bone only either).
That is still listed as a todo in the code.
This makes brush influence into a tube instead of a sphere.
It can be used along the outline of a mesh to adjust it's silhouette.
Note that all this takes advantage of changes from vertex paint,
from testing this seems useful so exposing from the brush options.
This secondary accumulation option accumulated brush falloff.
The same option in image painting accumulates color
as vertex paiht 'Spray' does.
Giving this option different behavior for vertex paint seems strange.
Also this is basically increasing falloff over time.
Remove the new code, expose existing 'Spray' as 'Accumulate'
to match other paint modes.
This makes vertex paint match image painting more closely.
- Add falloff shape option sphere/circle
where sphere uses a 3D radius around the cursor and
circle uses a 2D radius (projected), like previous releases.
- Add normal angle option so you can control the falloff.
- Add Cull option, to paint onto faces pointing away.
Disabling normals, culling and using circle falloff
allows you to paint through the mesh.
GSOC 2017 by Darshan Kadu, see: D2859.
This is a partial merge of some of the features from
the soc-2017-vertex_paint branch.
- Alpha painting & drawing.
- 10 new color blending modes.
- Support for vertex select in vertex paint mode.
2016 GSOC project by @nathanvollmer, see D2150
- Mirrored painting and radial symmetry, like in sculpt mode.
- Volume based splash prevention,
which avoids painting vertices far away from the 3D brush location.
- Normal based splash prevention,
which avoids painting vertices with normals opposite the normal
at the 3D brush location.
- Blur mode now uses a nearest neighbor average.
- Average mode, which averages the color/weight
of the vertices within the brush
- Smudge mode, which pulls the colors/weights
along the direction of the brush
- RGB^2 color blending, which gives a more accurate
blend between two colors
- multithreading support. (PBVH leaves are painted in parallel.)
- Foreground/background color picker in vertex paint
In the future we should make these two buttons on one line
However because we need `gen_context = 'PAINT_STENCIL'`
this is a little hard and we need to find a proper solution.
One might be using `context_pointer_set`
Patch by @craig_jones with edits by @blendify
Differential Revision: https://developer.blender.org/D2710
In the future we should make these two buttons on one line
However because we need `gen_context = 'PAINT_STENCIL'`
this is a little hard and we need to find a proper solution.
One might be using `context_pointer_set`
Patch by @craig_jones with edits by @blendify
Differential Revision: https://developer.blender.org/D2710
Although this wasn't so obvious since it
only showed up for factory settings and in the preferences window.
Panel display order depends on registration order,
Sorry for the noise. On the bright side we no longer need to move
classes around to re-arrange panels.
This commit introduces the ability to use the Robert Penner easing equations
or a Custom Curve to control the way that the "Interpolate Sequence" operator
interpolates between keyframes. Previously, it was only possible to get linear
interpolation between the gp frames.
Workflow:
1) Place current frame between a pair of GP keyframes
2) Open the "Interpolate" panel in the Toolshelf
3) Choose the interpolation type (under "Sequence Options")
4) Adjust settings (e.g. if you're using "Custom Curve", use the curvemap widget
to define the way that the interpolation proceeds)
5) Click "Sequence" to interpolate
6) Play back/scrub the animation to see if you've got the result you want
7) If you need to make some tweaks, undo, or delete the generated keyframes,
then repeat the process again from step 4 until you've got the desired result.
This should make it easier to sculpt in high resolutions, downside is that the new way to calculate maximum edge length is a bit less intuitive. Maximum edge length used to be calculated as blender_unit * percentage_value, now it's blender_unit / value.
Reused old DNA struct member, but had to bump subversion to ensure correct compatibility conversion. Also changed default value slightly (would have had to set to 3.333... otherwise).
Was Requested by @monio (see https://rightclickselect.com/p/sculpting/zpbbbc/dyntopo-better-scale-input-in-constant-detail-mode) and I think it's worth testing.
Feature request during bconf, makes sense to have it even as an hack for
now, since this is probably one of the most common use cases. This should
be redone in bmesh once we have proper custom noramls handling in edit mode...
- Access with Shift-LMB or from the 'Create' toolbar tab.
- Uses curve fitting for bezier curves, with error and corner angle options.
- Optional tablet pressure to curve radius mapping.
- Depth can use the cursor or optionally draw onto the surface,
for the entire stroke or using the stroke start.
- Stroke plane can optionally be perpendicular to, or aligned to the surface normal.
- Optional radius tapering and for start/end points.
- Supports operator redo and calling from Python.
Now using same UI as in object/armature properties, also save one line in 3DView panesl. ;)
Nothing crucial there, but nice & safe to backport to 2.77 imho.
Specifically, when only one bone is selected and it's not really active.
(With multiple bones on the other hand that behavior is forced on,
since multi-paint can't modify purely zero weight verts and that's important.)
Adds 3D-Tiling options to the sculpt tool. This is very similar to the
symmetry options in the sense that it replicates the strokes. For tiling
this replication happens with a linear offset to fill the whole object
along one or more axis.
This allows to create geometry that can be tiled seamless. One use case
is the creation of tileable textures by sculpting high resolution
geometry and then rendering it with an orthographic camera to create
maps for diffuse, normal, etc
Notes:
Patch by Tilman Blumhagen with minor changes (move tile flags to paint
symmetry flags).
After some feedback from artists, leaving tiling value to constant
offset, though I suspect that some method that uses the object
bounding box dynamically might be good to have too. It can
be added later though :)
Thanks a lot for the patch!
Patch: D1426
From the various forum threads and the fact that a new addon has cropped up,
it appears that it is not that well known that this tool exists, and that it
can be used solve a very common problem that animators face. Namely:
When you've gone through blocking out your key poses and then realise
that you need to adjust parts of the rig which don't change much, this
tool solves the problem of needing to go through doing grunt-work to
fix all the other keyframes which now need to change as well.
So, this tool is now available in the following two places (in addition to
the existing Pose -> Propagate menu):
* Toolbar - The "Propagate" button will use the default mode (or the last
used mode for each subsequent invocation).
The arrow-button beside this will allow choosing between the different
modes. (NOTE: The UI team may have different thoughts on this, but,
let's give this a try for a while first, to see if this sort of thing works)
* Alt-P - In Pose Mode, this will now bring up a menu allowing you to choose
which mode is used. Since this sort of thing is something that does
get run several times in a row when you need it, having this hotkey
will make it a bit more convenient.
structs to paint struct (might be useful for vertex paint too in the
future)
Cavity masking now has a curve control. The control will set the amount
of masking for positive cavity ("pointness") or negative cavity
("cavity") with x axis being the amount of cavity and 0.0 = full cavity,
1.0 = full pointness, 0.5 = no cavity and the y axis being the amount of
alpha.
