* when an object had wire draw in Draw Extra enabled and
it was selected and set as a scene, it would draw
as selected. Changed so it draws the wires in a grey
shade, to communicate it is not in the active scene
Full log:
http://www.blender3d.org/cms/Irregular_Shadow_Buffe.785.0.html
In short: this is a shadow buffer approach that always results in crispy
shadows, independent of lamp buffer size or zoom level. This shadow buffer
system also supports transparent shadow.
This is part of work on refreshing Shadow Buffers in Blender. You now can
choose of two types (Classical, Irregular). More types will follow. Also
quality issues for Classical shadow buffers are going to be reviewed,
especially to solve the lousy Biasing.
For the CVS log record; it is based on articles:
Gregory Johnson et al, University of Texas, Austin. (Regular grid method).
Timo Aila and Samuli Laine, Helsinki University of Technology. (BSP method).
That is, a 3D curve now displays as ->->->-> instead of -|-|-|-|.
Comparing the two, I didn't find the arrow display any more confusing then the straight lines when dealing with loops and tilt variations. Sharp turns are more likely to display crossed lines though.
Others should feel free to disagree and make it better.
In a quick glance: (temp image)
http://www.blender.org/bf/rt.png
Main reason is that Lattices are useful a lot for Armature deformation.
Lattices just provide much more precise and interesting control. However,
with only bone envelopes it's very hard to use.
Working with Lattice vertex groups is nearly identical to Mesh:
- on CTRL+P 'make parent' you can choose the deform option now
- In editmode, the buttons to control vertex groups are available
- In outliner you can select vertexgroups too
- Deforming Lattices with Armatures has all options as for Mesh now.
Note:
- No WeightPaint has been added yet. To compensate, the editmode
drawing for a Lattice with vertex group shows weight values for the active
vertex group.
- Lattice editmode doesn't undo/redo weight editing yet.
- Softbody for Lattice still uses own vertex weights
Implementation notes:
- derivedmesh weight_to_rgb() is now exported to drawobject.c
- been doing cleanups in code (order of includes, var declarations, etc)
- weightpaint button handling now is generic
I've checked on Brecht's proposal for Custom Element data;
http://mediawiki.blender.org/index.php/BlenderDev/CustomElementData
It could have been used, but that would mean the existing code for
vertexgroup handling and armature deform couldn't be re-used. I guess this
is really a later todo.
had to make some room in the "Mesh Tools 1" panel,
removed "Center" - its alredy in the "Mesh Tools" panel, and grouped the "Normal" draw buttons.
At the moment mixing modes dosnt work, we will need to review this to see if its worth attempting.
really cool to get this working solidly, but there are many potential problems with the
triangle face creation across the flat surfaces, especially when there are holes inside
the curves. Maybe this could be a fun project for someone better at this than I? :)
Taper object curves still cause similar problems...
* Made the curve radius affect the 'Nsize' curve normal drawing too, so you don't need a
bevel to see the value.
- draw-extra for Lamps did not follow selection color
- Surface objects were drawing curves always in unselected color, also its
draw-extra options didn't follow selection color then
- pending commit for OSX intel systems, with intel graphics. These now call
an extra swapbuffers after glFlush(). Code is ifdeffed, and doesnt affect
other systems.
- show-off commit: option to have transparent nodes over the composite
result. Only draws Image for active Viewer Node now, and image doesnt
translate nor zoom (which isnt bad though).
Set in themes the alpha color of "node backdrop" to make nodes
transparent.
Curves without bevel/extrude don't react to buttons to fill front/back.
That is coded that way, so added this info to the tooltip
Bug report #4566
Creases drawing became very awkward in commit in august last year. Flipped
the drawing order so the fat lines - denoting creases - are drawn first.
That way the value of crease is visible, as well as edge selection state.
When using Node Shaders, the OpenGL color (solid drawmode) in 3d window
was still using the base Material only. That's a bit counter-intuitive
yes... i've replaced this with a function that checks for the active
material node color. Not perfect, but at least interactive.
New "Dimension" button: when using TAB to cycle over buttons, the dimension
event was sent multiple times, accumulating scaling. The code was also not
prepared to handle multiple changes at one event.
Also: added object_get_boundbox(Object *ob) in BKE_object.h, so the code
now really supports most primitives in Blender.
- Selection wasn't possible on center dots in Object mode. I keep adding
it and it keeps disappearing again. Added clear comments in code too.
- Particles: (debug still) print "build particles" happened on each redraw
when "Display percentage" for particles was set to zero.
And more particle issues... the attempts to allow particle systems to be
part of duplicators (groups especially) isn't easy to get working!
This commit solves regular animated particle systems... they rendered on
the wrong location, using wrong object transform.
When using CTRL+L for materials, you can end up with non-existing material
indices in faces. The drawing code then was still happily drawing the old
situation (or something random, its a static array).
This commit checks the maximum amount of materials on an object, and draws
the last available material for a non-existing index. It uses an ugly
global yes, but this code is bad anyway. :)
Dynamic particles sometimes didn't properly use global coordinates.
Meaning they were transformed by an Object, for example when it has
animation constraints.
Error caused by attempt to get duplicators to work for particles. Will
need re-evaluation this.. for now restored old functionality, with
exception of dupli-groups.
- if you add new theme colors, you need to initialize them correctly and
add that in the usiblender.c version patching for saved themes
- the code for detecting group membership was highly confusing
- group colors were even used for non-groups
Further; I didnt add group theme colors yet, that's not a bug. It's a todo
item I preferred to tackle with having a decent wirecolor system once.
issues in parallel... So this commit contains: an update of
the solver (e.g. moving objects), integration of blender IPOs,
improved rendering (motion blur, smoothed normals) and a first particle
test. In more detail:
Solver update:
- Moving objects using a relatively simple model, and not yet fully optimized - ok
for box falling into water, water in a moving glass might cause trouble. Simulation
times are influenced by overall no. of triangles of the mesh, scaling meshes up a lot
might also cause slowdowns.
- Additional obstacle settings: noslip (as before), free slip (move along wall freely)
and part slip (mix of both).
- Obstacle settings also added for domain boundaries now, the six walls of the domain are
obstacles after all as well
- Got rid of templates, should make compiling for e.g. macs more convenient,
for linux there's not much difference. Finally got rid of parser (and some other code
parts), the simulation now uses the internal API to transfer data.
- Some unnecessary file were removed, the GUI now needs 3 settings buttons...
This should still be changed (maybe by adding a new panel for domain objects).
IPOs:
- Animated params: viscosity, time and gravity for domains. In contrast
to normal time IPO for Blender objects, the fluidsim one scales the time
step size - so a constant 1 has no effect, values towards 0 slow it down,
larger ones speed the simulation up (-> longer time steps, more compuations).
The viscosity IPO is also only a factor for the selected viscosity (again, 1=no effect).
- For objects that are enabled for fluidsim, a new IPO type shows up. Inflow
objects can use the velocity channels to animate the inflow. Obstacles, in/outflow
objects can be switched on (Active IPO>0) and off (<0) during the simulation.
- Movement, rotation and scaling of those 3 types is exported from the normal
Blender channels (Loc,dLoc,etc.).
Particles:
- This is still experimental, so it might be deactivated for a
release... It should at some point be used to model smaller splashes,
depending on the the realworld size and the particle generation
settings particles are generated during simulation (stored in _particles_X.gz
files).
- These are loaded by enabling the particle field for an arbitrary object,
which should be given a halo material. For each frame, similar to the mesh
loading, the particle system them loads the simulated particle positions.
- For rendering, I "abused" the part->rt field - I couldnt find any use
for it in the code and it seems to work fine. The fluidsim particles
store their size there.
Rendering:
- The fluidims particles use scaled sizes and alpha values to give a more varied
appearance. In convertblender.c fluidsim particle systems use the p->rt field
to scale up the size and down the alpha of "smaller particles". Setting the
influence fields in the fluidims settings to 0 gives equally sized particles
with same alpha everywhere. Higher values cause larger differences.
- Smoothed normals: for unmodified fluid meshes (e.g. no subdivision) the normals
computed by the solver are used. This is basically done by switching off the
normal recalculation in convertblender.c (the function calc_fluidsimnormals
handles other mesh inits instead of calc_vertexnormals).
This could also be used to e.g. modify mesh normals in a modifier...
- Another change is that fluidsim meshes load the velocities computed
during the simulation for image based motion blur. This is inited in
load_fluidsimspeedvectors for the vector pass (they're loaded during the
normal load in DerivedMesh readBobjgz). Generation and loading can be switched
off in the settings. Vector pass currently loads the fluidism meshes 3 times,
so this should still be optimized.
Examples:
- smoothed normals versus normals from subdividing once:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_1smoothnorms.pnghttp://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_2subdivnorms.png
- fluidsim particles, size/alpha influence 0:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_3particlesnorm.png
size influence 1:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_4particlessize.png
size & alpha influence 1:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_5particlesalpha.png
- the standard drop with motion blur and particles:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/elbeemupdate_t2new.mpg
(here's how it looks without
http://www10.informatik.uni-erlangen.de/~sinithue/temp/elbeemupdate_t1old.mpg)
- another inflow animation (moving, switched on/off) with a moving obstacle
(and strong mblur :)
http://www10.informatik.uni-erlangen.de/~sinithue/temp/elbeemupdate_t3ipos.mpg
Things still to fix:
- rotating & scaling domains causes wrong speed vectors
- get rid of SDL code for threading, use pthreads as well?
- update wiki documentation
- cool effects for rendering would be photon maps for caustics,
and motion blur for particles :)
object center, it doesn't generate displaylist (or derivedmesh). This
error showed especially on loading files, and you had to advance frame,
zoom out or press Numpad-9 to see stuff.
- Mark Border Seam: mark edges on the border of face selection as seam.
- Clear Seam: clears seams in selected faces.
Hotkey: Ctrl+E
- Alt+RMB Click: mark/clear edge as seam
- Alt+Shift+RMB Click: mark/clear seams along the shortest/straightest path
from last marked seam. The cost of the path also includes some measure of
'straightness' next to the typical distance to make things work more
predicatble and edgeloop friendly. Note that this cuts a path from edge to
edge, not vertex to vertex. That gives some nice control over the direction
of the seam.
Also includes:
- Removed old LSCM code.
- Fix updates glitches with DerivedMesh/Subsurf drawing in FaceSelect mode.
Now there's a drawMappedFacesTex instead of drawFacesTex.
- Minimize Stretch menu entry called Limit Stitch.
- Removed the lasttface global, was being set before it was used anyway, so
might as wel return from a function.
- Moved some backbuf sampling code to drawview.c from editmesh, so it can be
used by Faceselect and VPaint.
- Use BLI_heap in parametrizer.c.
This is using instructions from Ton, so hopefully the implementation is ok.
This is really needed here where we are using all sorts of wacky scales, and
empties look too big or too small. Of course we don't want to scale the
empties because there are often things parented to them.
New options are in edit buttons for empties to control the display style
and the size. New styles are easy to add, too. Just needs useful ideas and
minor effort from anyone who wants to.
Support for copying these values has also been added to the Copy Attributes
->Drawtype menu command.
Vpaint/weight/texture/UV modes were disabling zbuffer draw after drawing
the active object, causing objects to be drawn after (only selected ones)
to have no zbuffer on.
particle generator can be duplicated.
Note that the particles are only generated once, on the original, and just
get duplicated.
For static particles it worked already OK.
Added note for previous grouping commit; group-duplicators should support
fully all animation systems, including modifiers and particles.
-> Any Group Duplicate now can get local timing and local NLA override. This
enables to control the entire animation system of the Group.
Two methods for this have been implemented.
1) The quick way: just give the duplicator a "Startframe" offset.
2) Advanced: in the NLA Editor you can add ActionStrips to the duplicator
to override NLA/action of any Grouped Object.
For "Group NLA" to work, an ActionStrip needs to know which Object in a
group it controls. On adding a strip, the code checks if an Action was
already used by an Object in the Group, and assigns it automatic to that
Object.
You can also set this in the Nkey "Properties" panel for the strip.
Change in NLA: the SHIFT+A "Add strip" command now always adds strips to
the active Object. (It used to check where mouse was). This allows to add
NLA strips to Objects that didn't have actions/nla yet.
Important note: In Blender, duplicates are fully procedural and generated
on the fly for each redraw. This means that redraw speed equals to stepping
through frames, when using animated Duplicated Groups.
-> Recoded entire duplicator system
The old method was antique and clumsy, using globals and full temporal
copies of Object. The new system is nicer in control, faster, and since it
doesn't use temporal object copies anymore, it works better with Derived
Mesh and DisplayList and rendering.
By centralizing the code for duplicating, more options can be easier added.
Features to note:
- Duplicates now draw selected/unselected based on its Duplicator setting.
- Same goes for the drawtype (wire, solid, selection outline, etc)
- Duplicated Groups can be normally selected too
Bonus goodie: SHIFT+A (Toolbox) now has entry "Add group" too, with a
listing of all groups, allowing to add Group instances immediate.
-> Library System
- SHIFT+F4 data browse now shows the entire path for linked data
- Outliner draws Library Icons to denote linked data
- Outliner operation added: "Make Local" for library data.
- Outliner now also draws Groups in regular view, allowing to unlink too.
-> Fixes
- depsgraph missed signal update for bone-parented Objects
- on reading file, the entire database was tagged to "recalc" fully,
causing unnecessary slowdown on reading.
Might have missed stuff... :)
In Armature Pose-bone panel, the 'hide' button got replaced with a button
where you can type (TAB complete works) a name for a Mesh Object. It then
draws that Object instead of the indicated bone drawing type.
Fixes for bone layers:
- Akey in Editmode didnt work proper (now deselects all non visible bones
too. selection for editmode works on the vertices, not bones...
- Snap in Editmode now respects layers
Works like for Object layers, but local within Armature itself. Each Bone
can be in (16 now) any layer, and the Armature layer defines what is
visible or not. Also note that hiding will still work too.
Since the Blender code is *stuffed* with Bone options now, this commit
requires a good test if all tools we got now comply to layers...
(I counted 130 cases for checking for selected Bones in code!)
In PoseMode; hotkey M will show 'movetolayer' menu. Not in editmode...
then its the mirror menu.
Todo: make action/nla drawing comply to Armature layer settings.
Previous experiment (in 2000) didn't satisfy, it had even some primitive
NLA option in groups... so, cleaned up the old code (removed most) and
integrated it back in a more useful way.
Usage:
- CTRL+G gives menu to add group, add to existing group, or remove from
groups.
- In Object buttons, a new (should become first) Panel was added, showing
not only Object "ID button" and Parent, but also the Groups the Object
Belongs to. These buttons also allow rename, assigning or removing.
- To indicate Objects are grouped, they're drawn in a (not theme yet, so
temporal?) green wire color.
- Use ALT+SHIFT mouse-select to (de)select an entire group
But, the real power of groups is in the following features:
-> Particle Force field and Guide control
In the "Particle Motion" Panel, you can indicate a Group name, this then
limits force fields or guides to members of that Group. (Note that layers
still work on top of that... not sure about that).
-> Light Groups
In the Material "Shaders" Panel, you can indicate a Group name to limit
lighting for the Material to lamps in this group. The Lights in a Group do
need to be 'visible' for the Scene to be rendered (as usual).
-> Group Duplicator
In the Object "Anim" Panel, you can set any Object (use Empty!) to
duplicate an entire Group. It will make copies of all Objects in that Group.
Also works for animated Objects, but it will copy the current positions or
deforms. Control over 'local timing' (so we can do Massive anims!) will be
added later.
(Note; this commit won't render Group duplicators yet, a fix in bf-blender
will enable that, next commit will sync)
-> Library Appending
In the SHIFT-F1 or SHIFT+F4 browsers, you can also find the Groups listed.
By appending or linking the Group itself, and use the Group Duplicator, you
now can animate and position linked Objects. The nice thing is that the
local saved file itself will only store the Group name that was linked, so
on a next file read, the Group Objects will be re-read as stored (changed)
in the Library file.
(Note; current implementation also "gives a base" to linked Group Objects,
to show them as Objects in the current Scene. Need that now for testing
purposes, but probably will be removed later).
-> Outliner
Outliner now shows Groups as optio too, nice to organize your data a bit too!
In General, Groups have a very good potential... for example, it could
become default for MetaBall Objects too (jiri, I can help you later on how
this works). All current 'layer relationships' in Blender should be dropped
in time, I guess...
sets. To fix it, I got rid of a very ancient hack to enable set grey wire
drawing (setting a global to pretend it's picking select draw).
Now this setting is nicely passed on via functions as argument.
