Caused by {rBe3faef686d38}.
Error was getting the preview [which wasnt there yet]
These only appeared once the material tab in the Properties Editor was
used (since this ensured a valid preview icon).
Above commit changed behavior for RNA icon getter (this does not create
data anymore), so ensure the preview by hand here.
Maniphest Tasks: T89284
Differential Revision: https://developer.blender.org/D12178
This is used to set the default caps type for the stroke. Before always was rounded and only could be changed later in Edit mode
Two new buttons has been added to topbar.
NOTE: New icons are been designed (T90414)
The buttons are expanded to list in Properties panel.
Reviewed By: mendio, HooglyBoogly
Differential Revision: https://developer.blender.org/D11999
These were only showing in the Properties Editor, but there is no reason
to have the panels be different in the sidebar (they should not show in
the top bar though).
agreed upon by both @anoniov and @mendio
ref T88787
Internally, when using Fill brush a dilate of the filled area was done, but this was hardcoded to 1 pixel.
In some situations, this was not enough, so now the value is accesible in the UI and can be set with different values.
Also, as this value is more used than `Leak Size`, the new Dilate is on Topbar, and Leak Size has been moved to Advanced panel.
These settings are used though for these strokes (see
'paint_stroke_use_dash'), should be visible in the UI as well.
This was correctly added when dashing was introduced in rB15f82278d5d4
btw., but then messed up in rBfb74dcc5d69d.
Maniphest Tasks: T87816
Differential Revision: https://developer.blender.org/D11096
In {rBb279fef85d1a} the button that displays a texture in a Properties
Editor texture tab was added for geometry nodes.
Same commit will actually show them for Brush textures as well (but
disabled -- because the Texture users dont match).
This task is for finanlizing proper support for Brush textures as well.
There was originally a separate patch for this (see {D9813}) but most of
it was already implemented by above commit.
**what this solves**
from the default startup file:
- go to any sculpt or paint mode and add a texture to your brush
- observe the button to edit this texture in the Properties editor is
greyed out
{F9860470}
There are two possible solutions:
- [1] call the texture template for the brush `texture_slot` texture
(instead of the brush 'texture') from the python UI code, this is then
working in harmony how ButsTextureUser works for brushes
- [2] tweak the way `ButsTextureUser` works (dont rely on
`RNA_BrushTextureSlot` there)
This patch implements the first solution.
Since `brush.texture_slot` is `br->mtex` RNA wrapped and `brush.texture`
is `br->mtex.tex` RNA wrapped, this really comes down to doing the same
thing. I checked that creating a new texture and unlinking/deleting will
have the same results even though they take slightly different code
paths: assignment and NULLing the pointers are working on the same (see
above) and RNA update callbacks also do the same [even though in
different functions]:
- brush.texture will do rna_Brush_main_tex_update
- brush.texture_slot.texture will do rna_TextureSlotTexture_update /
rna_TextureSlot_update
(only difference here is an additional DEG relations update in the case
of texture_slot which should not do harm)
Differential Revision: https://developer.blender.org/D10626
The colons are not necessary in these situations because it's clear
that the label applies to the next group of buttons anyway, and they
add unecessary visual complexity. Committing as part of D9924.
This commit is a refactor of the fill tool to solve several problems we had since the first version of the tool.
Changes:
* The filling speed has been improved for each step of the process with the optimization of each algorithm/function.
* New `AutoFit` option to fill areas outside of the viewport. When enable, the total size of the frame is calculated to fit the filling area.
* New support multiframe filling. Now it is possible to fill multiple similar frames in one go.
* New `Stroke Extension` option to create temporary closing strokes. These strokes can be displayed and adjusted dynamically using wheel mouse or PageUp/Down keys.
* Parameter `Resolution` now is named `Precision` and has been moved to topbar.
* `Resolution` now has decimals and can be lower than 1 to allow quick filling in storyboarding workflows. Maximum value has been set as 5.
* Parameter `Simplify` has been moved to Advanced panel.
* Improved fill outline detection. In some cases, the outline penetrated the area to be filled with unexpected results.
* Fixes some corner case bugs with infinite loops.
As a result of this refactor, also these new functionalities has been added.
* New support for multiframe in `Draw` mode. Any drawing in active frame is duplicated to all selected frame.
* New multiframe display mode. Keyframes before or after of the active frame are displayed using onion colors. This can be disable using Onion overlay options.
This tool implements smearing for multires displacement over the limit
surface, similar to how smearing for colors and topology slide works.
When used the displacement values of the vertices "slide" over the
topology, creating the effect of smearing the surface detail.
As the brush just modifies displacement values instead of coordinates,
the total displacement of the affected area doesn't change. This means
that this smearing effect can be used multiple times over the same area
without generating any artifacts in the topology.
When the brush is used with the pinch or expand smear modes,
displacement differences are pushed into the same area, creating hard
surface effects without pinching the topology.
As any other brush that relies on the limit surface (like displacement
erasers), this will work better after using apply base.
Reviewed By: sergey, JulienKaspar, dbystedt
Differential Revision: https://developer.blender.org/D9659
This adds deformation types to snake hook and the elastic deformation
type. This mode deforms the mesh using a kelvinlet instead of applying
the displacement directly inside the brush radius, which is great for
stylized shapes sketching.
Changes in rake rotation when using elastic are too strong when set
to 1, so I'll add a nicer way to support rake rotations with smoother
transitions in the future.
Reviewed By: sergey, JulienKaspar
Differential Revision: https://developer.blender.org/D9560
This adds a new property to the sculpt vertex color paint brush to limit
the area of the brush that is going to be used to sample the wet paint
color. This is exactly the same concept as normal radius and area radius
that exist for sculpting brushes for sampling the surface depth and
orientation.
When working near color hard edges, this allows to prevent the color
from the other side of the edge to blend into the wet paint.
With 1.0 (the previous default) wet paint radius, as soon as the brush touches
one vertex of the other color, the wet paint mix color changes, making it
impossible to maintain the border between the two colors.
Reviewed By: sergey, dbystedt, JulienKaspar
Differential Revision: https://developer.blender.org/D9587
Approximately 141 changes of capitalization to conform to MLA title style.
Differential Revision: https://developer.blender.org/D8392
Reviewed by Julian Eisel
This adds a property to the grab that masks vertices based on its
original normal and grab delta. When used on thin meshes, it allows to
grab the silhouette from one side of the object without affecting the
shape of the other side.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9205
Shorten name of 'Inverse Cursor Color' to 'Inverse Color' so that it does not overflow its popover.
Differential Revision: https://developer.blender.org/D9274
Reviewed by Brecht Van Lommel
This adds support for pen tilt in sculpt mode. For now, pen tilt is used
by tweaking the tilt strength property, which controls how much the pen
angle affects the sculpt normal. This is available in Draw, Draw Sharp,
Flatten, Fill, Scrape and Clay Strips brushes, but it can be enabled in
more tools later.
The purpose of this patch is to have a usable implementation of pen tilt
in a painting mode, so users can test and see in which hardware and
platforms this feature is supported and how well it works. If it works
ok, more tools and features that rely on pen tilt can be implemented,
like brushes that blend between two deformations depending on the angle.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8893
This simulation area mode moves the active area with the brush. When
enabled, the cloth brush has no restrictions on stroke length, area or
mesh vertex count.
In order to work, this enables PBVH nodes dynamically for simulation as
the stroke location moves and builds the constraints for new nodes
during the stroke. When a node is not inside the simulated area, all the
constraints that were created for it and vertex collisions are not
computed. The simulation limits falloff areas and constraints tweaking
control how the simulated and no simulated nodes blend.
Reviewed By: sergey, zeddb
Differential Revision: https://developer.blender.org/D8726
Mainly a UI adjustment, no functional changes
To have the default mode in the advanced panel as separated option is not the best solution.
Now, there is a pin option and when it is enabled, the brush keeps this mode.
Differential Revision: https://developer.blender.org/D8974
This should improve the issue with Scrape accumulation in concave
surfaces. When the strength of the brush is higher, the area radius is
also bigger, so the scrape plane is more stable preventing it from
accumulating displacement in the same area.
The Scrape/Fill default presets are also updated to include this
functionality.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8821
This adds a new brush property called "Deformation Target" which
controls how the brush deformations is going to affect the mesh data. By
default is set to Geometry, which makes the brushes displace the
vertices. When set to Cloth Simulation, the deformation of the brush is
applied to the cloth solver constraints, so the simulation is
responsible to apply the final deformation. This allows to add cloth
simulation effects to other sculpt tools with minor modifications to their
code.
This patch enables Cloth Simulation deformation target for Pose and
Boundary brushes, which are tools that are already designed to work in
low poly counts and produce large deformations. This allows creating the
most common cloth effects, like bending and compressing folds, without
relying on collisions.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8578
Many of these popovers could use a design pass in 2.91, but for 2.90 we
don't want to change any UI strings at this point, so the best way to
solve the cutoff text is to widen the popovers. Sadly this won't affect
popovers when other languages besides English have longer strings, but
solving that is a much larger task.
Another benefit is that tweaking sculpt / paint brush options feels much
less cramped with slightly wider popovers.
I only know of one string that is still slightly cutoff by default with
this patch, the "Max Element Distance" property of the pose brush in the
sculpt mode brush settings popover. But I didn't think it was worth
widening that popover more to deal with that one case.
Differential Revision: https://developer.blender.org/D8575
This adds the boundary_falloff_type and boundary_offset to control how the
falloff of the Boundary Brush is applied.
Boundary Origin Offset is the same concept as the Pose Origin offset in
the Pose Brush. It is a multiplier that adds extra length to the brush
radius to locate the deformation pivot further from the boundary without
affecting the falloff.
The Falloff type includes Constant (previous default), brush radius, loop
and loop and invert. Loop and Loop and Invert can be used to create
deformation patterns in a mesh.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8526
Now the operators are split to define different default values. This is also required for the future Bezier primitive tools.
This allows to show in the Topbar the number of subdivisions. Before this value was totally hidden and it was number of Edges. The wheelmouse can be used to override the value while running, but does not change the default value.
{F8766270}
All operators share same code.
Also, fixed some bad practices done with Toolbar in python.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D8506
This brush includes a set of deformation modes designed to deform and
control the shape of the mesh boundaries, which are really hard to do
with regular sculpt brushes (and even in edit mode). This is useful
for creating cloth assets and hard surface base meshes.
The brush detects the mesh boundary closest to the active vertex and
propagates the deformation using the brush falloff into the mesh.
It includes bend, expand, inflate, grab and twist deform modes.
The main use cases of this brush are the Bend and Expand deformation
modes, which depend on a grid topology to create the best results.
In order to do further adjustments and tweaks to the result of these
deformation modes, the brush also includes the Inflate, Grab and
Twist deformation modes, which do not depend that much on the topology.
Grab and Inflate are the same operation that is implemented in the
Grab and Inflate tools, they are also available in the boundary brush
as producing deformations with regular brushes in these areas is very
hard to control.
Even if this brush can produce deformations in triangle meshes and
meshes with a non-regular quad grid, the more regular and clean the
topology is, the better. Most of the assets this brush is intended to
deform are always created from a cylindrical or plane quad grid, so it
should be fine. Also, its algorithms can be improved in future versions
to handle more corner cases and topology patterns.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8356
This makes possible to choose between a local and a global simulation
when the cloth brush is used. Local simulation is the current default.
When global simulation is enabled, the cloth brush simulates the entire
mesh without taking any simulation limits into account.
This was possible before by setting the simulation limits to 10 (the
current maximum value allowed) so the entire mesh was inside the limits,
but this was a hack as the limits scale with the radius and there should
not be any limitation on how big the simulated area can be to be able to
simulate an entire object. This also allows to make a more clear
distinction between cloth brush presets that are intended to be used in
local areas to add details or globally to generate the base shape of the
mesh.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8481
This implements collisions in the solver of the cloth brush/filter. It
uses the scene colliders as a regular physics simulation.
There are still some parameters (friction, distance to the surface...)
that can be exposed as properties in later patches.
Thanks to Sebastian Parborg for helping me with the implementation.
Reviewed By: sergey, zeddb
Differential Revision: https://developer.blender.org/D8019
The scale deform mode includes rotation by default, so when when scaling
down a part of the models it becomes harder to control as the effect of
the rotation less predictable (similar to using trackball rotation in a
very small radius). This locks the rotation of the segment, so parts of
the model can be scaled down in a more predictable way.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8465
The cloth brush has a defined simulated area with a falloff. In the falloff
area (the area between the dashed white circle and the exterior white
circle), simulation properties change in order to fade out the
simulation deformation effects towards the boundary.
With some brushes and stroke types (like anchored strokes with pinching
or grabbing with full strength), it is possible to apply more force than
what the boundary falloff can compensate, so the simulation breaks when
this happens.
This option pins the falloff area with softbody constraints, This
produces a much better deformation falloff and it is no longer possible
to move the vertices near the simulation boundary, so the simulation
won't break no matter the strength of the forces applied inside the
simulated areas.
This is an option as it is particularly useful for some brushes to add
localized details, but for brushes that are supposed to deform the
entire mesh (like the grab brush in D8424), this can add unwanted
softbody constraints that affect the simulation result.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8435
This property adds constraints to the simulation using the initial
location of the vertices, making it behave like a soft body. The
strength of these constraints can be modified with the brush parameter.
This makes some deformation modes more subtle and predictable, making it
possible to use the cloth brush to add surface detail in a more
controllable way without loosing completely the original shape of the
mesh.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7845
This adds extra deform modes to the slide mode of the Topology
Slide/Relax brush (both slide and smear are almost identical).
This is useful to move topology to a specific area to add more localized
details
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8349
This allows to use pen pressure modulation in hardness, wet mix, wet
persistence, flow and density, as well as inverting the modulation (more
pressure, less density...). With this, it is possible to create brushes
that mix paint or apply a new color based on the pressure.
Reviewed By: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D8267
The smear brush was using the stroke direction to slide colors across
the mesh surface (this is called drag in other sculpt tools). Similarly,
other deformations can be included. The most common ones in image
editing are pinch and expand, which can be used to sharpen transitions
between colors.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8270
Enables the color palette subpanel for brushes that have color
capabilities (only the paint brush for now)
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8268
This option allows posing meshes with different disconnected elements
using the Pose Brush.
This is achieved by doing the following:
- Creating an ID per vertex that stores the connected component of that vertex.
- By using those IDs, one fake topology connection is created per vertex to the nearest vertex in a different ID. The maximum distance to create that connection is determined by the "Max Element Distance" property. These fake connectivity neighbors are used in the Sculpt API functions iterators, so all the algorithms of the Pose Brush can run without modifications as if everything was part of the same mesh.
In order to make this work, the "Connected only" property of the Pose Brush needs to be disabled. This will add an extra performance cost to the Pose Brush and its preview. To achieve optimal results, max element distance should be as low as possible.
Reviewed By: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D7282
