It seems to be useful still in cases where the particle are distributed in
a particular order or pattern, to colorize them along with that. This isn't
really well defined, but might as well avoid breaking backwards compatibility
for now.
* Remove some unnecessary SSE emulation defines.
* Use full precision float division so we can enable it.
* Add sqrt(), sqr(), fabs(), shuffle variations, mask().
* Optimize reduce_add(), select().
Differential Revision: https://developer.blender.org/D2764
Decoupled ray marching is not supported yet.
Transparent shadows are always enabled for volume rendering.
Changes in kernel/bvh and kernel/geom are from Sergey.
This simiplifies code significantly, and prepares it for
record-all transparent shadow function in split kernel.
We started to run out of bits there, so now we separate flags
which came from __object_flags and which are either runtime or
coming from __shader_flags.
Rule now is: SD_OBJECT_* flags are to be tested against new
object_flags field of ShaderData, all the rest flags are to
be tested against flags field of ShaderData.
There should be no user-visible changes, and time difference
should be minimal. In fact, from tests here can only see hardly
measurable difference and sometimes the new code is somewhat
faster (all within a noise floor, so hard to tell for sure).
Reviewers: brecht, dingto, juicyfruit, lukasstockner97, maiself
Differential Revision: https://developer.blender.org/D2428
Basically, the problem here was that the transform that's used to bring texture coordinates
to world space is either fetched while setting up the shader (with Object Motion is enabled) or
fetched when needed (otherwise). That helps to save ShaderData memory on OpenCL when Object Motion isn't needed.
Now, if OM is enabled, the Lamp transform can just be stored inside the ShaderData as well. The original commit just assumed it is.
However, when it's not (on OpenCL by default, for example), there is no easy way to fetch it when needed, since the ShaderData doesn't
store the Lamp index.
So, for now the lamps just don't support local texture coordinates anymore when Object Motion is disabled.
To fix and support this properly, one of the following could be done:
- Just always pre-fetch the transform. Downside: Memory Usage increases when not using OM on OpenCL
- Add a variable to ShaderData that stores the Lamp ID to allow fetching it when needed
- Store the Lamp ID inside prim or object. Problem: Cycles currently checks these for whether an object was hit - these checks would need to be changed.
- Enable OM whenever a Texture Coordinate's Normal output is used. Downside: Might not actually be needed.
When using the Normal output of the Texture Coordinate node on Point and Spot lamps, the coordinates now depend on the rotation of the lamp.
On Area lamps, the Parametric output of the Geometry node now returns UV coordinates on the area lamp.
Credit for the Area lamp part goes to Stefan Werner (from D1995).
Basically don't use rcp() in areas which seems to be critical after
second look. Also disabled some multiplication operators, not sure
yet why they might be a problem.
Tomorrow will be setting up a full test with all cases which were
buggy in our farm to see if this fix is complete.
Several ideas here:
- Optimize calculation of near_{x,y,z} in a way that does not require
3 if() statements per update, which avoids negative effect of wrong
branch prediction.
- Optimization of direction clamping for BVH.
- Optimization of point/direction transform.
Brings ~1.5% speedup again depending on a scene (unfortunately, this
speedup can't be sum across all previous commits because speedup of
each of the changes varies from scene to scene, but it still seems to
be nice solid speedup of few percent on Linux and bigger speedup was
reported on Windows).
Once again ,thanks Maxym for inspiration!
Still TODO: We have multiple places where we need to calculate near
x,y,z indices in BVH, for now it's only done for main BVH traversal.
Will try to move this calculation to an utility function and see if
that can be easily re-used across all the BVH flavors.
Using ones complement for detecting if transform has been applied was confusing
and led to several bugs. With this proper checks are made.
Also added a few transforms where they were missing, mostly affecting baking
and displacement when `P` is used in the shader (previously `P` was in the
wrong space for these shaders)
Also removed `TIME_INVALID` as this may have resulted in incorrect
transforms in some cases.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2192
Enables Catmull-Clark subdivision meshes with support for creases and attribute
subdivision. Still waiting on OpenSubdiv to fully support face varying
interpolation for subdividing uv coordinates tho. Also there may be some
inconsistencies with Blender's subdivision which will be resolved at a
later time.
Code for reading patch tables and creating patch maps is borrowed
from OpenSubdiv.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2111
Issue was caused by wrong intersection distance scaling on instance pop,
which could cause intersection distance to become zero, confusing following
intersection checks.
This commit contains all the work related on the AMD megakernel split work
which was mainly done by Varun Sundar, George Kyriazis and Lenny Wang, plus
some help from Sergey Sharybin, Martijn Berger, Thomas Dinges and likely
someone else which we're forgetting to mention.
Currently only AMD cards are enabled for the new split kernel, but it is
possible to force split opencl kernel to be used by setting the following
environment variable: CYCLES_OPENCL_SPLIT_KERNEL_TEST=1.
Not all the features are supported yet, and that being said no motion blur,
camera blur, SSS and volumetrics for now. Also transparent shadows are
disabled on AMD device because of some compiler bug.
This kernel is also only implements regular path tracing and supporting
branched one will take a bit. Branched path tracing is exposed to the
interface still, which is a bit misleading and will be hidden there soon.
More feature will be enabled once they're ported to the split kernel and
tested.
Neither regular CPU nor CUDA has any difference, they're generating the
same exact code, which means no regressions/improvements there.
Based on the research paper:
https://research.nvidia.com/sites/default/files/publications/laine2013hpg_paper.pdf
Here's the documentation:
https://docs.google.com/document/d/1LuXW-CV-sVJkQaEGZlMJ86jZ8FmoPfecaMdR-oiWbUY/edit
Design discussion of the patch:
https://developer.blender.org/T44197
Differential Revision: https://developer.blender.org/D1200
This commit implements heuristic which allows to skip nodes pushed to the stack
from intersection if distance to them is larger than the distance to the current
intersection.
This should solve speed regression which i didn't notice in the original QBVH
commit (which could have because i had WIP version of this patch applied in my
local branch).
From quick tests speed seems to be much closer to what is was with regular BVH.
There's still some possible code cleanup, but they'll need a bit of assembly
code check and now i want to make it so artists can happily use Cycles over the
holidays.
Old algorithm:
Raytrace from one transparent surface to the next step by step. To minimize
overhead in cases where we don't need transparent shadows, we first trace a
regular shadow ray. We check if the hit primitive was potentially transparent,
and only in that case start marching. this gives extra ray cast for the cases
were we do want transparency.
New algorithm:
We trace a single ray. If it hits any opaque surface, or more than a given
number of transparent surfaces is hit, then we consider the geometry to be
entirely blocked. If not, all transparent surfaces will be recorded and we
will shade them one by one to determine how much light is blocked. This all
happens in one scene intersection function.
Recording all hits works well in some cases but may be slower in others. If
we have many semi-transparent hairs, one intersection may be faster because
you'd be reinteresecting the same hairs a lot with each step otherwise. If
however there is mostly binary transparency then we may be recording many
unnecessary intersections when one of the first surfaces blocks all light.
We found that this helps quite nicely in some scenes, on koro.blend this can
give a 50% reduction in render time, on the pabellon barcelona scene and a
forest scene with transparent leaves it was 30%. Some other files rendered
maybe 1% or 2% slower, but this seems a reasonable tradeoff.
Differential Revision: https://developer.blender.org/D473
This now supports multiple steps and subframe sampling of motion.
There is one difference for object and camera transform motion blur. It still
only supports two steps there, but the transforms are now sampled at subframe
times instead of the previous and next frame and then interpolated/extrapolated.
This will give different render results in some cases but it's more accurate.
Part of the code is from the summer of code project by Gavin Howard, but it has
been significantly rewritten and extended.
