The mesh convert operator can 'freeze' a mesh
(WYSIWYG, modifiers, shape keys etc).
However its not very obvious that the way to perform this
operation is to convert a mesh to a mesh.
Expose this as 'Visual Geometry to Mesh' in the 'Apply' menu,
since this is where users might expect to see it.
Intended to replace legacy GL_SELECT, without the limitations of
sample queries which can't access depth information.
This commit adds VIEW3D_SELECT_PICK_NEAREST and VIEW3D_SELECT_PICK_ALL
which access the depth buffers to detect whats under the pointer,
so initial selection is always the closest item.
The performance of this method depends a lot on the OpenGL
implementations glReadPixels.
Since reading depth can be slow, buffers are cached for object picking
so selecting re-uses depth data, performing 1 draw instead of 3
(for 24, 18, 10 px regions, picking with many items under the pointer).
Occlusion queries draw twice when picking nearest,
so worst case 6x draw calls per selection.
Even with these improvements occlusion queries is faster on AMD hardware.
Depth selection is disabled by default, toggle option under select method.
May enable by default if this works well on different hardware.
Reviewed as D2543
The custom poll function for surfacedeform_bind seems to have caused
issues when calling it from Python. Fixed by using the generic modifier
poll function, and setting the button to be active or not in the
Python UI code instead. (there might be a better way, but for now this
works fine)
There were some issues with how we store outliner tree elements:
Apparently the only removable elements have been data-blocks so far.
When recreating the TreeElements, their TreeStoreElem instances were
mainly identified by their ID pointer. However non-data-blocks mostly
depend on an index. For collections, such an index isn't a reliable
measure though if we want to allow removing items. Depending on it for
identifying the TreeStoreElem instance would cause some quite noticeable
glitches (wrong highlights, two elements sharing highlight, etc).
For now I've solved that by actually removing the TreeStoreElem that
represents the removed element. A little limitation of this is that
after undoing the removal, some information might get lost, like
flags to store selection, or opened/closed state.
A better solution that would also fix this issue would be having a real
unique identifier for each non-data-block element, like an idname or even
its data-pointer. Not sure if we can get those to work reliable with
file read/write though, would have to investigate...
Also added a general Outliner tree traversal utility.
This adds an option to force fields of type "Force", which enables the
simulation of gravitational behavior (dist^-2 falloff).
Patch by @AndreasE
Reviewers: #physics, LucaRood, mont29
Reviewed By: #physics, LucaRood, mont29
Tags: #physics
Differential Revision: https://developer.blender.org/D2389
This commit adds a way to debug Cycles motion blur issues which
are usually happening due to something crazy happening in between
of frames. Biggest trouble was that artists had no clue about
what's happening in subframes before they render. This is at
least inefficient workflow when dealing with motion blur shots
with complex animation.
Now there is an option in Time Line Editor which could be found
in View -> Show Subframe. This option will expose current frame
with it's subframe to the time line editor header and it'll allow
scrubbing with a subframe precision in time line editor.
Please note that none of the tools in Blender are aware of
subframe, so they'll likely be using current integer frame still.
This is something we don't consider a bug for now, the whole
purpose for now is to give a tool for investigation. Eventually
we'll likely tweak all tools to be aware of subframe.
Hopefully now we can finish the movie here in the studio..
I didn't manage to get the proper object context in the collection
properties editor. That said I got it working for now in a temporary way
since this will change once we get workspaces anyways
(see changes in buttons_context.c and
rna_scene.c::rna_LayerCollection_mode_settings_get)
I still need to handle the merging of the settings. I will find a
provisory solution while we wait for depsgraph.
(also layer_collection_create_mode_settings_object and layer_collection_create_mode_settings_edit could probably be elsewhere - under draw/engines likely)
Initial work by Clément Foucault with contributions from Dalai Felinto
(mainly per-collection engine settings logic, and depsgraph iterator placeholder).
This makes Blender require OpenGL 3.3. Which means Intel graphic card
and OSX will break. Disable CLAY_ENGINE in CMake in those cases.
This is a prototype render engine intended to help the design of real
render engines. This is mainly an engine with enphasis in matcap and
ambient occlusion.
Implemented Features
--------------------
* Clay Render Engine, following the new API, to be used as reference for
future engines
* A more complete Matcap customization with more options
* Per-Collection render engine settings
* New Ground Truth AO - not enabled
Missing Features
----------------
* Finish object edit mode
- Fix shaders to use new matrix
- Fix artifacts when edge does off screen
- Fix depth issue
- Selection sillhouette
- Mesh wires
- Use mesh normals (for higher quality matcap)
- Non-Mesh objects drawing
- Widget drawing
- Performance issues
* Finish mesh edit mode
- Derived-Mesh-less edit mode API (mesh_rende.c)
* General edit mode
- Per-collection edit mode settings
* General engines
- Per-collection engine settings
(they are their, but they still need to be flushed by depsgraph, and
used by the drawing code)
Design Documents
----------------
* https://wiki.blender.org/index.php/Dev:2.8/Source/Layers
* https://wiki.blender.org/index.php/Dev:2.8/Source/DataDesignRevised
User Commit Log
---------------
* New Layer and Collection system to replace render layers and viewport layers.
* A layer is a set of collections of objects (and their drawing options) required for specific tasks.
* A collection is a set of objects, equivalent of the old layers in Blender. A collection can be shared across multiple layers.
* All Scenes have a master collection that all other collections are children of.
* New collection "context" tab (in Properties Editor)
* New temporary viewport "collections" panel to control per-collection
visibility
Missing User Features
---------------------
* Collection "Filter"
Option to add objects based on their names
* Collection Manager operators
The existing buttons are placeholders
* Collection Manager drawing
The editor main region is empty
* Collection Override
* Per-Collection engine settings
This will come as a separate commit, as part of the clay-engine branch
Dev Commit Log
--------------
* New DNA file (DNA_layer_types.h) with the new structs
We are replacing Base by a new extended Base while keeping it backward
compatible with some legacy settings (i.e., lay, flag_legacy).
Renamed all Base to BaseLegacy to make it clear the areas of code that
still need to be converted
Note: manual changes were required on - deg_builder_nodes.h, rna_object.c, KX_Light.cpp
* Unittesting for main syncronization requirements
- read, write, add/copy/remove objects, copy scene, collection
link/unlinking, context)
* New Editor: Collection Manager
Based on patch by Julian Eisel
This is extracted from the layer-manager branch. With the following changes:
- Renamed references of layer manager to collections manager
- I doesn't include the editors/space_collections/ draw and util files
- The drawing code itself will be implemented separately by Julian
* Base / Object:
A little note about them. Original Blender code would try to keep them
in sync through the code, juggling flags back and forth. This will now
be handled by Depsgraph, keeping Object and Bases more separated
throughout the non-rendering code.
Scene.base is being cleared in doversion, and the old viewport drawing
code was poorly converted to use the new bases while the new viewport
code doesn't get merged and replace the old one.
Python API Changes
------------------
```
- scene.layers
+ # no longer exists
- scene.objects
+ scene.scene_layers.active.objects
- scene.objects.active
+ scene.render_layers.active.objects.active
- bpy.context.scene.objects.link()
+ bpy.context.scene_collection.objects.link()
- bpy_extras.object_utils.object_data_add(context, obdata, operator=None, use_active_layer=True, name=None)
+ bpy_extras.object_utils.object_data_add(context, obdata, operator=None, name=None)
- bpy.context.object.select
+ bpy.context.object.select = True
+ bpy.context.object.select = False
+ bpy.context.object.select_get()
+ bpy.context.object.select_set(action='SELECT')
+ bpy.context.object.select_set(action='DESELECT')
-AddObjectHelper.layers
+ # no longer exists
```
This revision extends the functionality of the "Fill Range by Selection" button in
the "Distance from Camera/Object" modifiers so that only selected mesh vertices
in the edit mode are taken into account (instead of considering all vertices when
in the object mode) to compute the min & max distances from the reference.
This will give users much finer control on the range values.
