and RNA for it independent of the build flag for enabling Freestyle. Suggested
by Sergey Sharybin through a code review of the branch.
* Many #ifdef WITH_FREESTYLE blocks were removed to always have Freestyle-specific
DNA file specification and RNA for it built in Blender. This will allow Freestyle
setting survive even when a non-Freestyle build is used for loading and saving
files. It is noted that operations are still conditionally built through #ifdef
WITH_FREESTYLE blocks.
* To this end, new blenkernel files BKE_freestyle.h and intern/freestyle.c have
been added. All API functions in FRS_freestyle_config.h as well as some of those
in FRS_freestyle.h were moved to the new files. Now the relocated API functions
have BKE_ prefix instead of FRS_.
Resolved conflicts:
release/datafiles/startup.blend
source/blender/editors/space_nla/nla_buttons.c
Also updated source/blender/blenkernel/intern/linestyle.c as a follow-up of
recent changes for the use of bool.
Instead of flagging the rigid body world for frame update just call
BKE_rigidbody_do_simulation() recursively for all scenes.
This avoids having to constantly check if the simulation needs to be
updated.
The rigid body world could be rebuilt on start frame and one frame after
start frame. The latter was necessary sice animation playback usually
doesn't start at start frame.
This lead to different simulations depending on which frame the
simulaton was rebuilt when animation was involved.
Now we only rebuild the world on start frame.
This is actually tricky to do since, as mentioned above, animation
playback starts on second frame. To work around this we rebuild the
world before the actual update.
The alternative would be to rebuld the world on every simulation change
(like the other simulations do it) but this is an expensive operation
and would be too slow.
Issue happened for scene. movie clip and mask strips, which contains
pointers to datablocks which are freeing on loading new file.
Also, scene strip would crash when pasted from clipboard after scene
was unlinked from file.
besides performance in some cases.
* DAG_scene_sort is now removed and replaced by DAG_relations_tag_update in
most cases. This will clear the dependency graph, and only rebuild it right
before it's needed again when the scene is re-evaluated.
This is done because DAG_scene_sort is slow when called many times from
python operators. Further the scene argument is not needed because most
operations can potentially affect more than the current scene.
* DAG_scene_relations_update will now rebuild the dependency graph if it's not
there yet, and DAG_scene_relations_rebuild will force a rebuild for the rare
cases that need it.
* Remove various places where ob->recalc was set manually. This should go
through DAG_id_tag_update() in nearly all cases instead since this is now
a fast operation. Also removed DAG_ids_flush_update that goes along with
such manual tagging of ob->recalc.
Copying scenes didn't handle rigid body worlds previously.
Since we use groups to keep track of objecs in the rigid body sim it's
tricky to do the right thing here since groups aren't duplicated.
One option would be to create new groups and add the duplicated objects
into those but that has other drawbacks.
So the rigid body world isn't copied for now.
TODO find a better way of handling this.
Since rigid bodies need their world to be be updated correctly we now
pass it alongside the parent scene in scene_update_tagged_recursive().
Add BKE_object_handle_update_ex() as well as other object functions
that take a RigidBodyWorld for this.
Ideally this shouldn't be needed but we'd have to restructure scene
handling for that. It's not a small taks however and definitely not
something that can be done before release.
Thanks to Campbell for review.
This was caused by multiple instantiations of the same basic problem. The
rigidbody handling code often assumed that "scene" pointers referred to the
scene where an object participating in the sim resided (and where the rigidbody
world for that sim lived). However, when dealing with background sets, "scene"
often only refers to the active scene, and not the set that the object actually
came from. Hence, the rigidbody code would often (wrongly) conclude that there
was nothing to do.
For example, we may have the following backgound set/scene chaining scenario:
"active" <-- ... <-- set i (rigidbody objects live here) <-- ... <-- set n
The fix here is a multi-part fix:
1) Moved sim-world calculation from BKE_scene_update_newframe() to
scene_update_tagged_recursive()
+ This is currently the only way that rigidbody sims in background sets will
get calculated, as part of the recursion
- These checks will get run on each update. <--- FIXME!!!
2) Tweaked depsgraph code so that when checking if there are any time-dependent
features on objects to tag for updating, the checking is done relative to the
scene that the object actually resides in (and not the active scene). Otherwise,
even if we recalculate the sim, the affected objects won't get tagged for
updating. This tagging is needed to actually flush the transforms out of the
RigidBodyObject structs (written by the sim/cache) and into the Object
transforms (obmat's)
3) Removed the requirement for rigidbody world to actually exist before we can
flush rigidbody transforms. In many cases, it should be sufficient to assume
that because the object with rigidbody data attached has been tagged for
updates, it should have updates to perform. Of course, we still check on this
data if we've got it, but that's only if the sim is in the active scene.
- TODO: if we have further problems, we should investigate passing the
"actual" scene down alongside the "active" scene for BKE_object_handle_update().
The problem was caused by the fact that BKE_scene_copy() was simply doing "memcpy"
to duplicate render layers including lineset settings without taking care of pointers
in the linesets. For this reason, freeing the original scene and copied one resulted
in freeing allocated memory buffers twice.
Now BKE_scene_copy() properly duplicates linesets as part of render layers.
Also some code clean-up was made in the modified files.
Problem report by IRIE Shinsuke (with a patch to fix the crash). Many thanks!
Was silly mistake from rigidbody merge, base was used after it's been
freed.
Now don't free base in BKE_scene_base_remove() and rename it to
BKE_scene_base_unlink().
Constraints connect two rigid bodies.
Depending on which constraint is used different degrees of freedom
are limited, e.g. a hinge constraint only allows the objects to rotate
around a common axis.
Constraints are implemented as individual objects and bahave similar to
rigid bodies in terms of adding/removing/validating.
The position and orientation of the constraint object is the pivot point
of the constraint.
Constraints have their own group in the rigid body world.
To make connecting rigid bodies easier, there is a "Connect" operator that
creates an empty objects with a rigid body constraint connecting the selected
objects to active.
Currently the following constraints are implemented:
* Fixed
* Point
* Hinge
* Slider
* Piston
* Generic
Note: constraint limits aren't animatable yet).
Add operators to add/remove rigid body world and objects.
Add UI scripts.
The rigid body simulation works on scene level and overrides the
position/orientation of rigid bodies when active.
It does not deform meshes or generate data so there is no modifier.
Usage:
* Add rigid body world in the scene tab
* Create a group
* Add objects to the group
* Assign group to the rigid body world
* Play animation
For convenience the rigid body tools operators in the tools panel of the 3d view
will add a world, group and add objects to the group automatically so you only have
to press one button to add/remove rigid bodies to the simulation.
Part of GSoC 2010 and 2012.
Authors: Joshua Leung (aligorith), Sergej Reich (sergof)
This is just the basic structure, the simulation isn't hooked up yet.
Scenes get a pointer to a rigid body world that holds rigid body objects.
Objects get a pointer to a rigdid body object.
Both rigid body world and objects aren't used directly in the simulation
and only hold information to create the actual physics objects.
Physics objects are created when rigid body objects are validated.
In order to keep blender and bullet objects in sync care has to be taken
to either call appropriate set functions or flag objects for validation.
Part of GSoC 2010 and 2012.
Authors: Joshua Leung (aligorith), Sergej Reich (sergof)
Many depsgraph failures are because some data in the graph is being
recalculated too early (or not at all).
Since we better support animators with working renders, here's a hack to
allow manual additional updates on frame changes.
In Property Editor, Object, Panel "Relations Extra" you now have two
buttons:
- Extra Object Update
- Extra Data Update
This will do an extra update of object and/or its data ONLY on frame changes.
Update happens as last.
Tested on files collected in Wiki todo, several cases now work OK, especially
the lags on updates.
This implements AO baking directly from multi-resolution mesh with much
less memory overhead than regular baker.
Uses rays distribution implementation from Morten Mikkelsen, raycast
is based on RayObject also used by Blender Internal.
Works in single-thread yet, multi-threading would be implemented later.
Nice formatted version (pictures soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.66/Usability
Short list of main changes:
- Transparent region option (over main region), added code to blend in/out such panels.
- Min size window now 640 x 480
- Fixed DPI for ui - lots of cleanup and changes everywhere. Icon image need correct size still, layer-in-use icon needs remake.
- Macbook retina support, use command line --no-native-pixels to disable it
- Timeline Marker label was drawing wrong
- Trackpad and magic mouse: supports zoom (hold ctrl)
- Fix for splash position: removed ghost function and made window size update after creation immediate
- Fast undo buffer save now adds UI as well. Could be checked for regular file save even...
Quit.blend and temp file saving use this now.
- Dixed filename in window on reading quit.blend or temp saves, and they now add a warning in window title: "(Recovered)"
- New Userpref option "Keep Session" - this always saves quit.blend, and loads on start.
This allows keeping UI and data without actual saves, until you actually save.
When you load startup.blend and quit, it recognises the quit.blend as a startup (no file name in header)
- Added 3D view copy/paste buffers (selected objects). Shortcuts ctrl-c, ctrl-v (OSX, cmd-c, cmd-v).
Coded partial file saving for it. Could be used for other purposes. Todo: use OS clipboards.
- User preferences (themes, keymaps, user settings) now can be saved as a separate file.
Old option is called "Save Startup File" the new one "Save User Settings".
To visualise this difference, the 'save startup file' button has been removed from user preferences window. That option is available as CTRL+U and in File menu still.
- OSX: fixed bug that stopped giving mouse events outside window.
This also fixes "Continuous Grab" for OSX. (error since 2009)
* Split and moved Cycles’ render layers panels into the render_layer
context as well (would be nice to hide this context when not needed,
e.g. with the BGE, but this is not so easy to do nicely...).
* Fixed some inconsistencies with trunk (probably due to svn merge
glitches) using r52858 as reference. Also recovered the missing
release/bin/blender-softwaregl file.
* A bunch of style code fixes in Blender's own code (not Freestyle
itself yet): line lengths, spaces around operators, block formatting,
headers, etc. In rna_linestyle.c, color_blend_items was replaced by
ramp_blend_items (exported from rna_material.c).
