the mesh ID for a full update. The conditions it uses are troublesome:
1. There must be an evaluated mesh
2. The evaluated mesh's active byte color layer must equal the original's
This logic doesn't make sense for a few reasons. First of all, the
`mloopcol` pointer doesn't make sense in the context of color
attributes (rather than the old vertex colors), since it only points
to byte color attribute on face corners. Second, just because the
layer pointers are equal doesn't mean something doesn't depend
on the attribute's values.
I think the best solution currently is to remove this "fast update"
case and instead work on optimizing the general case.
Also, T95842 suggests removing these pointers, and this is one
of the last remaining uses of `Mesh.mloopcol`.
Differential Revision: https://developer.blender.org/D15275
We store various lazily calculated caches on meshes, some of which
depend on the vertex positions staying the same. The current API to
invalidate these caches is a bit confusing. With an explicit set of
functions modeled after the functions in `BKE_node_tree_update.h`,
it becomes clear which function to call. This may become more
important if more lazy caches are added in the future.
Differential Revision: https://developer.blender.org/D14760
This makes calculation of selected indices slightly faster when the
input is a virtual array (the direct output of various nodes like
Face Area, etc). The utility can be helpful for other areas that
need to find selected indices besides field evaluation.
With the face area node used as a selection with 4 million faces,
the speedup is 3.51 ms to 3.39 ms, just a slight speedup.
Differential Revision: https://developer.blender.org/D15127
All of the operators in vertex paint mode didn't work properly with
the new color attribute system. They only worked on byte color type
attributes on the face corner domain.
Since there are four possible combinations of domains and types now,
it mostly ended up being simpler to convert the code to C++ and use
the geometry component API for retrieving attributes, interpolating
between domains, etc. The code changes ended up being fairly large,
but the result should be simpler now.
Differential Revision: https://developer.blender.org/D15261
When input file is changed, `orig_height` and `orig_width` fields are
reset, which causes thumbnail dimensions to be incorrectly calculated.
Only draw thumbnails if both mentioned fields are non 0.
One case of copying image formats was not properly using BKE_image_format_copy.
To fix this for existing .blend file we need to do versioning, ensuring the curve
mapping is properly copied.
Fix by always testing unhandled double-click events as press events,
irrespective of the previous event type.
**Details**
Handling double-click events only ran when the previously pressed-key
matched the current pressed-key.
Originally when double-click support was added the previous type was
compared (ignoring it's press/release value) and while not necessary
it was harmless as it matched the check for double-click events being
generated.
As of [0] the logic for click/drag detection changed to ignore release
events as release this could interrupt dragging.
This made it possible to generate double-click events that failed the
`event->prev_press_type == event->type` comparison.
In these cases it was possible to generate double-click
events that would not fall-back to a 'press' value when unhandled.
[0]: 102644cb8c
If the some driver had been flagged as "invalid", the flag would not be
cleared when joining armatures which could lead to now valid drivers
still being flagged as invalid.
Now we clear this invalid flag on all drivers to force a recheck after
joining the armatures.
Add a `BKE_action_fcurves_clear(action)` function, which removes all the
Action's FCurves, and expose it as `ActionFCurves.clear()` in RNA.
This is more ergonomic than calling `remove` on f-curves until the list
is empty.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D14660
Add a poll message to the bone group operators, to explain they only
work in pose mode. Before, the buttons would be greyed out with no
explanation.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D15119
This patch suffixes Apple GPU device names with `(GPU - # cores)` so that variant GPUs with the same chipset can be distinguished. Currently benchmark scores for these M1 family GPUs are being incorrectly merged:
- M1: 7 or 8 cores
- M1 Pro: 14 or 16 cores
- M1 Max: 24 or 32 cores
- M1 Ultra: 48 or 64 cores
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D15257
Oneliner for T97961. Square sculpt brushes no longer fit
inside the radius circle, they now use the radius for
the square size.
{F13082514}
Note: original patch was modified to scale PBVH
search radius to avoid artifacts.
Differential Revision: https://developer.blender.org/D14974
Reviewed By: Joseph Eagar & Julien Kaspar
Ref: D14974
When GPU subdivision is used, and the modifier is not set to be applied
on the cage, UV selection is not synced with the face selection in the
viewport.
This happens because the extraction, despite being in edit mode, is set
to `MESH` instead of `BMESH` (or `MAPPED` in some cases) like for CPU
subdivision, and since the mesh is not always synchrnised with the BMesh
the edit mode flags are not always updated.
With GPU subdivision, when creating the `MeshRenderData`, the condition
`has_mdata && do_final && editmesh_eval_final != editmesh_eval_cage` is
true which forces the `MESH` extraction. Following comment in D14485,
this replace the `has_mdata` in the condition with `use_mapped` which
solves the issue.
Differential Revision: https://developer.blender.org/D15248
For example, the "id" attribute is stored as a named attribute.
If it doesn't exist already, `layer_index` was uninitialized, causing
issues with `CustomData_free_layer`. The fix is to use the generic
function to free a named layer in that case. Eventually the other
case will go away as T95965 is finished.
This reverts commit f0b4aa5d59.
This commit was making files to get bigger and bigger every time they
were saved and re-opened.
In the orphaned data in the outliner new collections would show up
there, even after continuously purging it. This would lead to a massive
file which get also very slow.
This problem will fix itself after a few re-open/re-saves of the files.
For anyone also experimenting this you can fix this faster by purging
the unused data multiple times in the file.
Example of file from the Project Heist (rev. 1014):
heist/pro/shots/010_opening/010_0050/010_0050.anim.blend
Adds an overlay option to show/hide the spline points & lines of masks in the Mask Editor.
It also moves the "smooth" option up (its position left of the selection dropdown was missleading).
{F11847272}
This emerged from a discussion in https://developer.blender.org/D12776
Differential Revision: https://developer.blender.org/D13314
This patch makes constant size a default for size edit operator of voxel remesh.
In turn, pressing CTRL now enables relative scale, the old default.
Patch also changes workspace status text entry with new additions. Note that it is a simple text and not an array of keymaps (for that further changes are needed)
{F13082567}
Reviewed By: Julien Kaspar & Joseph Eagar
Differential Revision: https://developer.blender.org/D14975
Ref D14975
The substep loop for rigid bodies causes unequal effects of force fields depedending on the substep setting, larger
substep counts cause a diminishing effect of force fields.
This is because the force to apply on a body is reset in Bullet after each step and needs to be recomputed. Without this
the body will just coast with constant velocity after the first substep. Since the per-step impulse with larger substep
counts is smaller, the effect is that more substeps cause a smaller total impulse.
The fix is to move external force calculation into the substep loop and update forces for each substep.
Note that this may be considered a breaking change, because the breaking commit rB1aa54d4921c2 has been in master for
a long time and after this fix force fields will generally have a much larger effect on rigid bodies (10x for the
default setting of 10 substeps).
Differential Revision: https://developer.blender.org/D15173
Baking assumed that color attributes could only have two configurations:
float color data type on vertices, or byte color type on face corners.
In reality the options can be combined to make four total options.
This commit handles the four cases explicitly with a somewhat
more scaleable approach (though this should really be C++ code).
This commit also changes some related error messages, tooltips,
and an enum name, in order to make the functionality more obvious.
Differential Revision: https://developer.blender.org/D15244
Do a more thorough search for strips that are not visible themselves,
but still influence the viewed time range.
The problem before was that tracks not immediately visible would not be
drawn at all. The strategy for fixing this was to simply include strips
that are visible only because of their extrapolation mode.
To do this, there is now a new function `get_visible_nla_strips` which
gives a first and last `NlaTrack` that needs to be drawn.
Tagging along with this is the removal of the strip index indicator from
the name on meta tracks. Because of the new structure of the code, it
would incur a performance penalty to restore the previous behavior
(requiring a linear search for the index). Since this number is of
virtually no utility to the user anyways (it has the look & feel of
developer debugging information), this is something I think we can
safely remove without regret.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D14738
When searching for the active NLA strip, avoid overwriting the found strip
pointer with NULL if it was already found in a previous iteration.
The active strip is searched for while looping over the NLA tracks. If the
active strip was found on a previous track, and not on the current track,
this would effectively set `actstrip = NULL`. This is now avoided.
Another benefit is that the search for the active strip is stopped as soon
as it's found, which should increase performance a tiny bit.
`find_active_strip_from_listbase()` expects two lists of strips with an
equal number of items. This is now not only documented, but also checked
for in an assertion.
Eevee rendered an empty image for aov nodes that weren't linked to
any other nodes. When connected the result was OK. The root cause was
that the AOV nodes were not marked as output node and pruned when not
connected to any other nodes. The pruning process is there to reduce
the complexity of the GLSL and improve compilation time and
execution time.
Regression introduced by {rBca37654b6327}. This commit reversed the
order of loading uniforms. The bloom renderpass used the previous
loading order to overwrite an existing uniform (bloomBaseAdd).
Due to the new ordering this doesn't work anymore where the render
pass outputted an image similar to the final image. This was fixed
by loading the correct value for bloomAddBase and remove the rewrite.
