Two issues are fixed here:
- On windows rename() doesn't actually renames file if destination file is already exist.
Solved by ulinking previously built proxy/timecode.
- IMB_TC_MAX_SLOT was set to incorrect value leading to record run timecode calculating
several times.
Issue is caused by scaling for power of 2 dimensions and mipmapping that happens through GLU. It looks like the library cannot handle float colour values above 1.0 correctly. Since we are close to release I will just clamp the srgb result for now even though it will result in a small performance loss for 16 bit textures only.
I tried a few things before that, glGenerateMipmaps + no scaling (supported for 2.0 GL hardware and up), or using our own scaling instead of glu among them which worked very nicely and gave a speedup too. However, since we are close to release and there may be issues with GPU mipmap generation, see:
http://www.gamedev.net/topic/495747-another-glgeneratemipmap-question/
(old discussion but better be sure than sorry)
I went for the most compatible solution. Maybe after release this can be tested if other devs agree.
byte => float, float => float, byte => byte conversions with profile, dither
and predivide. Previously code for this was spread out too much.
There should be no functional changes, this is so the predivide/table/dither
patches can work correctly.
This commit adds new timecode type which counts frames in gapless mode (counting
actually decoded frames instead of using pts to find frame number) which might
resolve issues with files which have got broken or incorrect base time value stored
in the header.
This timecode allows to deal with movies from #29388: Abnormal frame length on MP4 files
This patch adds:
* support for proxy building again (missing feature from Blender 2.49)
additionally to the way, Blender 2.49 worked, you can select several
strips at once and make Blender build proxies in the background (using
the job system)
Also a new thing: movie proxies are now build into AVI files, and
the proxy system is moved into ImBuf-library, so that other parts
of blender can also benefit from it.
* Timecode support: to fix seeking issues with files, that have
a) varying frame rates
b) very large GOP lengths
c) are broken inbetween
d) use different time code tracks
the proxy builder can now also build timecode indices, which are
used (optionally) for seeking.
For the first time, it is possible, to do frame exact seeking on
all file types.
* Support for different video-streams in one video file (can be
selected in sequencer, other parts of blender can also use it,
but UI has to be added accordingly)
* IMPORTANT: this patch *requires* ffmpeg 0.7 or newer, since
older versions don't support the pkt_pts field, that is essential
for building timecode indices.
Windows and Mac libs are already updated, Linux-users have to build
their own ffmpeg verions until distros keep up.
This commit fixes very noticeable seams caused by margins
calculated incorrectly. This commit changes way margin is
calculated in and makes textures really seamless.
Also margin limited to 32 isn't good now -- artists are baking
really large textures nowadays so margin is now limited to 64px.
Thank you, Morten!
This fix also allows for partial update of the image, speeding up painting.
The different code path implemented will be used to upload high resolution images to OpenGL when onion branch is merged.
Due to conversion of float textures to/from sRGB, corrections made to brush color sampling to take account of the image profile. This is not 100% correct yet as texture images used for projection painting strokes are not converted to/from sRGB yet(This has been decided due to loss of precision for 8-bit formats). It will have to do for now, though.
last-minute update, exr image loading is broken, will fix asap
=======================
Added option to baked named "Bake From Multires" which is avaliable for
normals baking and displacement baking.
If this option is enabled, then no additional hi-res meshes and render
structures would be created . This saves plenty of memory and meshes
with millions of faces could be successfully baked in few minutes.
Baking happens from highest level against viewport subdivision level,
so workflow is following:
- Set viewport level to level at which texture would be applied
during final rendering.
- Choose Displacement/Normals baking.
- Enable "Bake From Multires" option.
- You're ready to bake.
Displacement baker had aditional option named "Low Resolution Mesh".
This option is used to set if you want texture for realtime (games)
usage.
Internally it does the following:
- If it's disabled, displacement is calculated from subdivided
viewport level, so texture looks "smooth" (it's how default
baked works).
- If it's enabled, dispalcement is calculated against unsubdivided
viewport levels. This leads to "scales". This isn;t useful for
offline renders much, but very useful for creating game textures.
Special thanks to Morten Mikkelsen (aka sparky) for all mathematics
and other work he've done fr this patch!
Old bug report:
Image Editor, Painting: crash when texture was visible in
Material or Texture preview. Was caused by paint code
freeing mipmaps. Now replaced with a mipmap tag (to be done
again), and a new mipmap function that doesn't re-allocate.
- a linear float buffer was being created and saved into a non-linear DPX/Cineon file.
- removed the UI since the settings are not used at the moment.
added a utility function IMB_float_profile_ensure(), which returns a float buffer in the requested profile, using the existing if needed or returning an allocated buffer if the profile is different to that of the ImBuf. - Useful this case where the save function has its own linear setting.
Also use const char in many other parts of blenders code.
Currently this gives warnings for setting operator id, label and description since these are an exception and allocated beforehand.
The main reason to have this is so renders can be scripted to write to a specific file without having to do annoying tricks like set a dummy start/end frame range, render an animation and work out the current frame image will be written to, then rename after rendering.
Also made some 'char *' args into 'const char *'
- removed deprecated bitmap arg from IMB_allocImBuf (plugins will need updating).
- mostly tagged UNUSED() since some of these functions look like they may need to have the arguments used later.
tile cache code in imbuf, but it is not hooked up to the render engine.
Imbuf module: some small refactoring and removing a lot of unused or old code
(about 6.5k lines).
* Added a ImFileType struct with callbacks to make adding an file format type,
or making changes to the API easier.
* Move imbuf init/exit code into IMB_init()/IMB_exit() functions.
* Increased mipmap levels from 10 to 20, you run into this limit already with
a 2k image.
* Removed hamx, amiga, anim5 format support.
* Removed colormap saving, only simple colormap code now for reading tga.
* Removed gen_dynlibtiff.py, editing this is almost as much work as just
editing the code directly.
* Functions removed that were only used for sequencer plugin API:
IMB_anim_nextpic, IMB_clever_double, IMB_antialias, IMB_gamwarp,
IMB_scalefieldImBuf, IMB_scalefastfieldImBuf, IMB_onethird, IMB_halflace,
IMB_dit0, IMB_dit2, IMB_cspace
* Write metadata info into OpenEXR images. Can be viewed with the command
line utility 'exrheader'
For the image tile cache code, see this page:
http://wiki.blender.org/index.php/Dev:2.5/Source/Imaging/ImageTileCache
because the mipmap was not being refreshed. Also this will be problematic
to support when I add tile/mipmap cache, so would not rather not try to.
Can be added back afterwards if someone wants to make it work.
Patch by Alfredo de Greef with high quality image texture filters.
This adds 3 new filters:
* SAT: Summed Area Tables. This is like mipmaps, but using somewhat
more memory avoids some artifacts.
* EWA: Ellipitical Weighted Average, anisotropic filter.
* FELINE: Fast elliptical lines for anisotropic texture mapping.
The one change I made to this was to try to fix an alpha/premul
problem, hopefully I didn't break anything, it looks compatible
with the existing filter now for me.
svn merge https://svn.blender.org/svnroot/bf-blender/trunk/blender -r19820:HEAD
Notes:
* Game and sequencer RNA, and sequencer header are now out of date
a bit after changes in trunk.
* I didn't know how to port these bugfixes, most likely they are
not needed anymore.
* Fix "duplicate strip" always increase the user count for ipo.
* IPO pinning on sequencer strips was lost during Undo.
void bicubic_interpolation(struct ImBuf *in, struct ImBuf *out, float u, float v, int xout, int yout);
void neareast_interpolation(struct ImBuf *in, struct ImBuf *out, float u, float v, int xout, int yout);
void bilinear_interpolation(struct ImBuf *in, struct ImBuf *out, float u, float v, int xout, int yout);
Added...
void bicubic_interpolation_color(struct ImBuf *in, unsigned char *col, float *col_float, float u, float v);
void neareast_interpolation_color(struct ImBuf *in, unsigned char *col, float *col_float, float u, float v);
void bilinear_interpolation_color(struct ImBuf *in, unsigned char *col, float *col_float, float u, float v);
This is needed so for projection painting but generally useful if you want to get the interpolated color of a pixel in an image without having a destination imbuf.
While editing these I noticed the functons are a bit dodgy, they assume the input ImBuf has matching float/chr buffer to the output.
draws into the
frame.
This patch includes some changes I made...
* use blenders bitmap fonts (rather then own fonts)
* select font size
* user interface layout changes
* Marker as another image stamp option
Also added some new API calls
BMF_GetFontHeight(font);
BMF_DrawStringBuf(...); - so we can draw text into an imbuf's image buffer.
get_frame_marker(frame) - get the last marker from the frame.
IMB_rectfill_area(...) - fill in an image buffer with a rectangle area of color.
TODO - draw stamp info in 3d view, at the moment it just displays in the animation.
Fixed Campbell's patch for IMB_flipx:
- header file declaration is corrected
- reordered loops to make things faster (less cache misses
and no tests for float-buffers on a _per pixel basis_!)
(Campbell: it'd be nice, if you could check with me before patching
the sequencer. Or at least pay attention to compiler warnings :) )
new option for the image sequencer's image strips, flip x/y, (useful when making animatics to test the direction characters walk across the screen)
added IMB_flipy was alredy there, needed to add IMB_flipx.
Initial commit of imagebrowser in trunk.
BIG COMMIT!
Main changes:
* completely reworked imasel space
* creation and storage of the preview images for materials, textures, world and lamp
* thumbnails of images and movie files when browsing in the file system
* loading previews from external .blend when linking or appending
* thumbnail caching according to the Thumbnail Managing Standard: http://jens.triq.net/thumbnail-spec/
* for now just kept imasel access mostly as old imgbrowser (CTRL+F4, CTRL+F1) a bit hidden still.
* filtering of file types (images, movies, .blend, py,...)
* preliminary managing of bookmarks ('B' button to add, XKEY while bookmark active to delete)
More detailed info which will be updated here: http://wiki.blender.org/index.php/User:Elubie/PreviewImageBrowser
Places that need special review (and probably fixes):
* BLO_blendhandle_get_previews in readblenentry
* readfile.c: do_version and refactorings of do_library_append
* UI integration
TODO and known issues still:
* Accented characters do not display correctly with international fonts
* Crash was reported when browsing in directory with movie files
* Bookmark management still needs some UI work (second scrollbar?), feedback here is welcome!
Credits:
Samir Bharadwaj (samirbharadwaj@yahoo.com) for the icon images.
Many thanks to everyone who gave feedback and helped so far!
Please read:
http://www.blender3d.org/cms/Imaging.834.0.html
Or in short:
- adding MultiLayer Image support
- recoded entire Image API
- better integration of movie/sequence Images
Was a whole load of work... went down for a week to do this. So, will need
a lot of testing! Will be in irc all evening.
Here's the full release log with example file.
http://www.blender3d.org/cms/Render_Baking.827.0.html
For people who don't read docs; just press ALT+CTRL+B on a Mesh
with texture faces!
Todos:
- maybe some filter options extra?
- Make normal maps in Tangent space
- ImagePaint now uses ImBuf directly, and the rect blending functions
were moved into the imbuf module.
- The brush spacing, timing and sampling was abstracted into brush.c, for
later reuse in other paint modes.
Float ImagePaint support.
Textured Brushes:
- Only the first texture channel is used now.
- Options for size and offset should be added, but need to find some space
in the panel, or add a second one ..
