Gathers information about object geometry and textures. Very basic at
this moment, but need to start somewhere.
Things which needs to be included still:
- "Runtime" information, like BVH. While it is not directly controllable
by artists, it's still important to know.
- Device array sizes. Again, not under artists control, but is added to
the overall size.
- Memory peak at different synchronization stages.
At this point it simply prints info to the stdout after F12 is done,
need better control over that too.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D3566
With copy-on-write we can no longer assumes the point density data is
available after Cycles synchronization with Blender data is done. So
force it to be loaded earlier, even if it's not great for interactivity.
User notes
----------
Compositing, rendering of multi-layers in Eevee should be fully working now.
Development notes
-----------------
Up until now we were still using the same depsgraph for rendering and viewport
evaluation. And we had to go out of our ways to be sure the depsgraphs were
updated.
Now we iterate over the (to be rendered) view layers and create a depsgraph to
each one, fully evaluated and call the render engines (Cycles, Eevee, ...) with
this viewlayer/depsgraph/evaluation context.
At this time we are not handling data persistency, Depsgraph is created from
scratch prior to rendering each frame. So I got rid of most of the partial
update calls we had during the render pipeline.
Cycles: Brecht Van Lommel did a patch to tackle some of the required Cycles
changes but this commit mark these changes as TODOs. Basically Cycles needs to
render one layer at a time.
Reviewers: sergey, brecht
Differential Revision: https://developer.blender.org/D3073
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
Note that some little parts of code have been dissabled because eval_ctx
was not available there. This should be resolved once DerivedMesh is
replaced.
This commit contains the first part of the new Cycles denoising option,
which filters the resulting image using information gathered during rendering
to get rid of noise while preserving visual features as well as possible.
To use the option, enable it in the render layer options. The default settings
fit a wide range of scenes, but the user can tweak individual settings to
control the tradeoff between a noise-free image, image details, and calculation
time.
Note that the denoiser may still change in the future and that some features
are not implemented yet. The most important missing feature is animation
denoising, which uses information from multiple frames at once to produce a
flicker-free and smoother result. These features will be added in the future.
Finally, thanks to all the people who supported this project:
- Google (through the GSoC) and Theory Studios for sponsoring the development
- The authors of the papers I used for implementing the denoiser (more details
on them will be included in the technical docs)
- The other Cycles devs for feedback on the code, especially Sergey for
mentoring the GSoC project and Brecht for the code review!
- And of course the users who helped with testing, reported bugs and things
that could and/or should work better!
The idea is to make include statements more explicit and obvious where the
file is coming from, additionally reducing chance of wrong header being
picked up.
For example, it was not obvious whether bvh.h was refferring to builder
or traversal, whenter node.h is a generic graph node or a shader node
and cases like that.
Surely this might look obvious for the active developers, but after some
time of not touching the code it becomes less obvious where file is coming
from.
This was briefly mentioned in T50824 and seems @brecht is fine with such
explicitness, but need to agree with all active developers before committing
this.
Please note that this patch is lacking changes related on GPU/OpenCL
support. This will be solved if/when we all agree this is a good idea to move
forward.
Reviewers: brecht, lukasstockner97, maiself, nirved, dingto, juicyfruit, swerner
Reviewed By: lukasstockner97, maiself, nirved, dingto
Subscribers: brecht
Differential Revision: https://developer.blender.org/D2586
Previously, the code would only update the status string if the main status changed.
However, the main status did not include the remaining time, and therefore it wasn't updated until the amount of rendered tiles (which is part of the main status) changed.
This commit therefore makes the BlenderSession remember the time of the last status update and forces a status update if the last one was more than a second ago.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D2465
The range is controlled using the following command line arguments:
--cycles-resumable-start-chunk
--cycles-resumable-end-chunk
Those are 1-based index of range for rendering.
This is a way to avoid possible memory corruption when render threads works
in parallel with UI thread.
Not guarantees complete safe, but makes things easier to check anyway.
This feature is also known by the name Samples Offset, which allows
artists to render animation with given amount of samples N, but then
render more samples, starting from N and ending with M (where M > N)
and merge renders together as if they rendered exactly M samples.
Surely such effect could be achieved by changing Seed variable, but
that has possible issues with correlation artifacts and requiring to
manually deal with per render layer samples and such.
While we can't support all possible renderfarm-related features in
Cycles it's nice to support really commonly used stuff.
Here's a command how to run Blender with the new feature enabled:
blender -- --cycles-resumable-num-chunks 24 --cycles-resumable-current-chunk 2
This command will divide samples range in 24 parts and render
range #2 (chunk number is 1-based).
This feature might be changed a bit after we'll do some tests here
in the studio with it.
This way we avoid passing structures which could be up to
few hundred bytes by value to the utility functions.
Ideally we'll also have to add `const` qualifier in majority
of the calls, but C++ RNA does not allow us to do that because
it does not know if some function modifies contents or not.
The combined pass is built with the contributions the user finds fit.
It is useful for lightmap baking, as well as non-view dependent effects
baking.
The manual will be updated once we get closer to the 2.77 release.
Meanwhile the new page can be found here:
http://dalaifelinto.com/blender-manual/render/cycles/baking.html
Reviewers: sergey, brecht
Differential Revision: https://developer.blender.org/D1674
Combine all the highpoly pixel arrays into a single array with a lookup
object_id for each of the highpoly objects.
Note: This changes the Bake API, external engines should refer to the
bake_api.c for the latest API.
Many thanks for Sergey Sharybin for the complete review, changes
suggestion and feedback. (you rock!)
Reviewers: sergey
Subscribers: pildanovak, marcclintdion, monio, metalliandy, brecht
Maniphest Tasks: T41092
Differential Revision: https://developer.blender.org/D772
Official Documentation:
http://www.blender.org/manual/render/workflows/multiview.html
Implemented Features
====================
Builtin Stereo Camera
* Convergence Mode
* Interocular Distance
* Convergence Distance
* Pivot Mode
Viewport
* Cameras
* Plane
* Volume
Compositor
* View Switch Node
* Image Node Multi-View OpenEXR support
Sequencer
* Image/Movie Strips 'Use Multiview'
UV/Image Editor
* Option to see Multi-View images in Stereo-3D or its individual images
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
I/O
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
Scene Render Views
* Ability to have an arbitrary number of views in the scene
Missing Bits
============
First rule of Multi-View bug report: If something is not working as it should *when Views is off* this is a severe bug, do mention this in the report.
Second rule is, if something works *when Views is off* but doesn't (or crashes) when *Views is on*, this is a important bug. Do mention this in the report.
Everything else is likely small todos, and may wait until we are sure none of the above is happening.
Apart from that there are those known issues:
* Compositor Image Node poorly working for Multi-View OpenEXR
(this was working prefectly before the 'Use Multi-View' functionality)
* Selecting camera from Multi-View when looking from camera is problematic
* Animation Playback (ctrl+F11) doesn't support stereo formats
* Wrong filepath when trying to play back animated scene
* Viewport Rendering doesn't support Multi-View
* Overscan Rendering
* Fullscreen display modes need to warn the user
* Object copy should be aware of views suffix
Acknowledgments
===============
* Francesco Siddi for the help with the original feature specs and design
* Brecht Van Lommel for the original review of the code and design early on
* Blender Foundation for the Development Fund to support the project wrap up
Final patch reviewers:
* Antony Riakiotakis (psy-fi)
* Campbell Barton (ideasman42)
* Julian Eisel (Severin)
* Sergey Sharybin (nazgul)
* Thomas Dinged (dingto)
Code contributors of the original branch in github:
* Alexey Akishin
* Gabriel Caraballo
This flag is global for all the sessions and never changes. so it doesn't
really make sense to pass it around to all sessions and synchronization
routines.
Switched to a static member of BlenderSession now, but it's probably more
logical to introduce some sort of BlenderGlobals. Doesn't currently worth
a hassle for a single boolean flag tho.
This patch makes Cycles ignore the time spent in BVH construction etc. when
estimating the remaining time. Considering that the remaining time is calculated
based on the average time per tile so far, as far as I understand it makes no
sense to include the preprocessing time.
Reviewers: sergey, #cycles
Reviewed By: sergey, #cycles
Subscribers: sergey
Projects: #cycles
Differential Revision: https://developer.blender.org/D895
This way when something goes wrong in Cycles (for example out of VRAM, timelimit
launching the kernel etc) we'll have a nice report in the Info space header.
Sure it'll be nice to have mention of error in the image editor's information
line, but that's for the future.
This fixes T42747: "CUDA error" appears only momentarily, then disappears
(original patch by Sergey Sharybin)
Note: RNA API can't use size_t at the moment. Once it does this patch
can be tweaked a bit to fully benefit from size_t larger dimensions.
(right now num_pixels is passed as int)
Reviewed By: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D688
Baking progress preview is not possible, in parts due to the way the API
was designed. But at least you get to see the progress bar while baking.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D656
Expand Cycles to use the new baking API in Blender.
It works on the selected object, and the panel can be accessed in the Render panel (similar to where it is for the Blender Internal).
It bakes for the active texture of each material of the object. The active texture is currently defined as the active Image Texture node present in the material nodetree. If you don't want the baking to override an existent material, make sure the active Image Texture node is not connected to the nodetree. The active texture is also the texture shown in the viewport in the rendered mode.
Remember to save your images after the baking is complete.
Note: Bake currently only works in the CPU
Note: This is not supported by Cycles standalone because a lot of the work is done in Blender as part of the operator only, not the engine (Cycles).
Documentation:
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Bake
Supported Passes:
-----------------
Data Passes
* Normal
* UV
* Diffuse/Glossy/Transmission/Subsurface/Emit Color
Light Passes
* AO
* Combined
* Shadow
* Diffuse/Glossy/Transmission/Subsurface/Emit Direct/Indirect
* Environment
Review: D421
Reviewed by: Campbell Barton, Brecht van Lommel, Sergey Sharybin, Thomas Dinge
Original design by Brecht van Lommel.
The entire commit history can be found on the branch: bake-cycles
a maximized Blender window in Ubuntu Unity. The window size would slightly change
as part of the unminimize effect.
Now cycles waits 0.2 seconds before restarting rendering after a viewport resize,
also a bit less flickery when changing the 3d view size in Blender itself.
before this only active scene would be rendered with border.
When do_render_fields_blur_3d() is finished, it'll modify
render's display rect so it'll correspond bordered render
result placed on black backgrund. Actual border is stored
nowhere, which makes it only way to re-calculate disprect
for all other renders used in compo based on source. Not
so big deal actually.
Also needed to modify Cycles a bit, because before this
patch it used border settings from scene being rendered.
Now made it so render data is passing to external engines.
Using a property inside RenderEngine structure for this.
Not best ever design for passing render data, but this
would prevent API breakage. So now external engines could
access engine.render to access active rendering settings.
Reviewed by Brecht, thanks!
Issue was caused by cycles trying to find builtin images in a main
database and in case of preview render images are not in database,
they're just referenced by shader node tree.
Now builtin images in cycles have got void* pointer to store data
needed to load builtin images.
In case ob blender session, this pointer will store pointer from
PointerRNA for image datablock and used later to construct Image
class based on this pointer.
This also saves database lookup for final render which is nice :)
Reviewed by Brecht.
This adds support of movie textures for Cycles rendering.
Uses the same builtin images routines as packed/generated images,
but with some extra non-rna hookups from blender_session side.
Basically, it's not so clear how to give access to video frames
via C++ RNA -- it'll require exposing ImBuf to API, doing some
threading locks and so. Ended up adding two more functions which
are actually bad level call, but don't consider it's so much bad
-- we have few bad calls already, which are actually related.
Changed a bit how builtin images names are passing to image
manager. Now it's not just an ID datablock name, but also a frame
number concatenated via '@' character, which makes itpossible to
easily know frame number to be used for movie images, without
adding extra descriptors to image manager.
Decoding of builtin name is a bit slower now, but it should be
still nothing in comparison with rendering complexity.
Also exposed image user's frame_current to python API, which
is needed to get absolute frame number of movie from node's
image user.
P.S. Generated/packed images are also using bad level call but
only does it to make things more clear here. Either all images
are using C++ RNA here or no images does. That's the most clear
for now.
This commit adds support of packed and generated images
for Cycles when using SVM backend. Movies are still not
supported. This changes also doesn't touch OSL which is
much less trivial to adopt for any images which are not
saved to disk.
Implementation details:
- When adding images to Image Manager is now possible
to mark image as builtin. Builtin images will bypass
OIIO loader and will use special loading callbacks.
- Callbacks are set by Blender Session and they're
using C++ RNA interface to obtain needed data (pixels,
dimensions, is_float flag).
- Image Manager assumes file path is used as reference
to a builtin images, but in fact currently image
datablock name is used for reference. This makes it
easy to find an image in BlendData database.
- Added some extra properties to Image RNA:
* channels, which denotes actual number of channels
in ImBuf. This is needed to treat image's pixels
correct (before it wasn't possible because API
used internal number of channels for pixels which
is in fact doesn't correlate with image depth)
* is_float, which is truth if image is stored in
float buffer of ImBuf.
- Implemented string lookup for C++ RNA collections
for cases there's no manual lookup function.
OSL is not supported because it used own image loading
and filtering routines and there's seems to be no API
to feed pre-loaded pixels directly to the library.
Think we'll either need to add some API to support
such kind of feeding or consider OSL does not have
support of packed images at all.
Movies are not supported at this moment because of lack
of RNA API to load specified frame. It's not difficult
to solve, just need to consider what to best here:
* Either write some general python interface for ImBuf
and use it via C++ API, or
* Write a PY API function which will return pixels for
given frame, or
* Use bad-level BKE_* call
Anyway, small steps, further improvements later.
Reviewed by Brecht, thanks!
This option enables keeping loaded images in the memory in-between
of rendering.
Implemented by keeping render engine alive for until Render structure
is being freed.
Cycles will free all data when render finishes, optionally keeping
image manager untouched. All shaders, meshes, objects will be
re-allocated next time rendering happens.
Cycles cession and scene will be re-created from scratch if render/
scene parameters were changed.
This will also allow to keep compiled OSL shaders in memory without
need to re-compile them again.
P.S. Performance panel could be cleaned up a bit, not so much happy
with it's vertical alignment currently but not sure how to make
it look better.
P.P.S. Currently the only way to free images from the device is to
disable Persistent Images option and start rendering.
Regular rendering now works tiled, and supports save buffers to save memory
during render and cache render results.
Brick texture node by Thomas.
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Textures#Brick_Texture
Image texture Blended Box Mapping.
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Textures#Image_Texturehttp://mango.blender.org/production/blended_box/
Various bug fixes by Sergey and Campbell.
* Fix for reading freed memory in some node setups.
* Fix incorrect memory read when synchronizing mesh motion.
* Fix crash appearing when direct light usage is different on different layers.
* Fix for vector pass gives wrong result in some circumstances.
* Fix for wrong resolution used for rendering Render Layer node.
* Option to cancel rendering when doing initial synchronization.
* No more texture limit when using CPU render.
* Many fixes for new tiled rendering.
The rendering device is now set in User Preferences > System, where you can
choose between OpenCL/CUDA and devices. Per scene you can then still choose
to use CPU or GPU rendering.
Load balancing still needs to be improved, now it just splits the entire
render in two, that will be done in a separate commit.
