This avoids need to do special trickery detecting whether the principal
point is to be changed when reloading movie clip. This also allows to
transfer the optical center from high-res footage to possibly its lower
resolution proxy without manual adjustment.
On a user level the difference is that the principal point is exposed in
the normalized coordinates: frame center has coordinate of (0, 0), left
bottom corner of a frame has coordinate of (-1, -1) and the right top
corner has coordinate of (1, 1).
Another user-visible change is that there is no more operator for setting
the principal point to center: use backspace on the center sliders will
reset values to 0 which corresponds to the center.
The code implements versioning in both directions, so it should be
possible to open file in older Blender versions without loosing
configuration.
For the Python API there are two ways to access the property:
- `tracking.camera.principal_point` which is measured in the normalized
space.
- `tracking.camera.principal_point_pixels` to access the pixel-space
principal point.
Both properties are not animatable, so there will by no conflict coming.
Differential Revision: https://developer.blender.org/D16573
Many reports and a few labels used string formatting without
explicitly calling tip_() or iface_(), so the untranslated message
was used instead of the translated one, even when it was extracted.
Differential Revision: https://developer.blender.org/D16405
This patch adds a "Show Gizmo" toggle to the Movie Clip Editor header, for consistency with other editors.
{F13892765}
Differential Revision: https://developer.blender.org/D16437
There are two operators added, which are available via a special
content menu next to the plane track image selector:
- New Image from Plane Marker
- Update Image from Plane Marker
The former one creates an image from pixels which the active plane
track marker "sees" at the current frame and sets it as the plane
track's image.
The latter one instead of creating the new image data-block updates
the image in-place.
This allows to create unwarped texture from a billboard from footage.
The intent is to allow this image to be touched up and re-projected
back to the footage with an updated content.
Available from a plane track image context menu, as well as from the
Track menu.
{F13243219}
The demo of the feature from Sebastian Koenig: https://www.youtube.com/watch?v=PDphO-w2SsA
Differential Revision: https://developer.blender.org/D15312
It can be assumed that all scripts comply with basic pep8 formatting
regarding white-space, indentation etc.
Also remove note in best practices page & update `tests/python/pep8.py`.
If we want to exclude some scripts from make format,
this can be done by adding them to `ignore_files` in:
source/tools/utils_maintenance/autopep8_format_paths.py
Or using `# nopep8` for to ignore for individual lines.
Ref T98554
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
#### Motivation
The View pie menu is a convenient way to access operators such as `Frame Selected` and `Frame All` which are usually mapped to `PERIOD` or `HOME` keys on the right side of most keyboard, making it hard hard to reach with the left hand.
The motivation for this patch comes from working with a 75% keyboard (no numpad). Most laptops face a similar problem.
#### Implementation
The View pie menu has been added to the following editors and sub-modes where applicable:
* Node Editor
* Video Sequencer
* Dopesheet
* Graph
* NLA
* Image
* Clip
* Outliner
More options could definitely be added to this menu for convenience, as long as it maintains the common options in the same place (Frame Selected on the left, Frame All on the right).
For positioning I went with the following layout:
{F11791186, size=full}
I've added `Zoom 1:1`to the Image Editor and the VSE Preview since there is no way to reset the zoom on keyboards without numpad (unless Emulate Numpad is turned on).
The Outliner uses `Show Active` and `Show Hierarchy` which are the closest ones to the equivalent in other editors. Should `Show Active` be renamed to `Frame Selected`?
The shortcut assigned is the same as the 3D Viewport (`ACCENT_GRAVE`).
#### Screenshots
Node Editor
{F11778387, size=full}
Dopesheet
{F11778400, size=full}
Graph
{F11778403, size=full}
Image Editor (Paint and View)
{F11791113, size=full}
Image Editor (Mask)
{F11791114, size=full}
UV Editor
{F11791119, size=full}
Clip Editor (Tracking)
{F11791137, size=full}
Clip Editor (Mask)
{F11791140, size=full}
Clip Editor (Graph)
{F11791151, size=full}
View operators are not yet implemented in Clip Editor Dopesheet mode (left a note about this in the menu poll).
Reviewed By: #user_interface, campbellbarton
Differential Revision: https://developer.blender.org/D13169
- Show "Lasso Select" in menus (along with Box & Circle select)
- Show "Extrude to Cursor" (along with other extrude actions).
- Rename operators that add/extrude on Ctrl-Click
since their names were inconsistent.
This is mainly for discoverability.
To be consistent with the image editors and 3D viewport
the cursor location can be changed from the sidebar.
This was missing from the clip editor, but support has been added in this commit.
Previously, the only way to precisely set the cursor was
to call the set cursor operator then use the redo panel to adjust the value.
To be consistent with all other editors the annotation
layers pannel should be placed in a "View Tab".
In my next commit, this tab will be expanded to include other options.
This commit makes the display options for mask only show in the header for the clip and image editors.
Prior to this change they would display in the header for the clip editor and in the sidebar for the image editors.
The Pattern and Search display options in the Clip Editor display settings
are independent and should not be grayed out since those options
remain relevant even with path display turned off.
Alternative solution were propoesed in D11630 and D11715
but each of those patches had downsides.
This solution is the simplest and does not break muscle memory.
This change makes the behavior consistent between shortcut and
option from space clip's header.
The only caveat is that the "Lock to Selection" is removed from the
Display popover. This is because it is rather hard to make operator
to render same as regular checkbox. However, shouldn't be a problem
because the setting in popover was redundant.
Differential Revision: https://developer.blender.org/D10423
Average selected tracks into the new one. This can be used to improve
stability of tracking on blurry or non-very-sharp feature shapes.
Averaging happens for all position, pattern corners and search area.
Disabled markers do not take effect on averaging. Keyframed flag is
copied from source.
Gaps in the source tracks will be linearly interpolated, to reduce
result track jump. Note that this only applies to gaps "inbetween".
This means that if an input track doesn't have markers in the
beginning/end of it, there is nothing to interpolate with and the
result track will jump.
Available from the Track panel, under the Merge category.
Differential Revision: https://developer.blender.org/D6323
- Add operators that previously could only be found in panels
- Re order menus to match other menus
- Organize Code
|Before|After|
|{F9493583}|{F9493584}|
|{F9493585}|{F9493586}|
|{F9493588}|{F9493590}|
|{F9493591}|{F9493592}|
Reviewed By: sergey, sebastian_k, #motion_tracking
Differential Revision: https://developer.blender.org/D9781
Steps to reproduce:
1. Add clip to clip editor
2. Open the tracking settings & tracking settings extra panels
To fix this the sub panel is only drawn if a track is active.
The main panel will exit early and display a "No active track" message.
This is consistent with other panels in the clip editor.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D9727
Previously, only predefined and limited set of intrinsics combinations
could have been refined. This was caused by a bundle adjustment library
used in the early days of the solver.
Now it is possible to fully customize which intrinsics are to be refined
during camera solving. Internally solver supports per-parameter settings
but in the interface they are grouped as following:
* Focal length
* Optical center
* Radial distortion coefficients (which includes k1, k2, k3, k4)
* Tangential distortion coefficients (which includes p1, p2)
Differential Revision: https://developer.blender.org/D9294
Historically the refine options had a hardcoded list of possibilities.
This was caused by an old bundle adjustment code which did not support
all possible combinations.
Now the bundle adjuster is based on Ceres solver, allowing to refine
anything in any combination.
Approximately 141 changes of capitalization to conform to MLA title style.
Differential Revision: https://developer.blender.org/D8392
Reviewed by Julian Eisel
Follow the MLA style, agreed upon in T79589. This means "from" within UI
labels should be lowercase.
Differential Revision: https://developer.blender.org/D8345
The unit being "pixels".
Before this change the solve errors were unitless in the UI.
With this change in place, the UI is now clear on that the unit of the
reprojection errors is pixels (px).
Differential Revision: https://developer.blender.org/D8000
This resolves one of the last few areas where we still use inappropriate
abbreviations. Reading abbreviated words is usually slower, because
users must parse, guess and translate the words. Using abbreviations
such as 'rot' is also especially bad since it's a word in itself too.
The main advantage of abbreviations is that they are faster to *write*,
which just isn't a concern for text in the UI.
Differential Revision: https://developer.blender.org/D8174
Neither Nuke nor Natron support OpenCV's radial distortion model
which makes it impossible to have any kind of interoperability.
The new model is available under the distortion model menu in Lens
settings.
Differential Revision: https://developer.blender.org/D7484
- Use the clip mask context menu for the image editor.
- Remove redundant CLIP_MT_mask_handle_type_menu.
- Remove "Add" items (was only in image mask context menu)
as the convention is not to include these in the context menu.
Unfortunately, it didn't turn out to be as great as I've hoped to it
will.
The issue is: the label eats too much space, making selector buttons
and image name to be barely readable. Initial idea of making the panel
somewhat wider didn't work either: due to the sizing policy of label
it takes a lot of panel width to make image name readable.
These panels were using the old names, but now they are not grease pencil, but annotations.
Also removed old Tools panel. This must be replaced with new Toolbar
The mask tools in the Tool Area of Clip Editor where never brought back,
after decision was made to postpone proper masking tools to 2.81.
This brings back the Mask Tool Panel in the Mask tab of Masking Tool Area.
This Diff also adds a better Context Menu, which respects whether you're
in Masking or Tracking mode. I have added the most important operators
there, with a focus on those that are otherwise harder to access.
Reviewers: sergey, billreynish
Subscribers: sebastian, brecht, hype
Tags: #motion_tracking
Differential Revision: https://developer.blender.org/D5075
